How to make a rooster from sculptural plasticine. Kanzashi master classes

print Thanks, great lesson +18

Today, together with you, we will learn how to sculpt a rooster from plasticine. This poultry is the real owner of the chicken coop and the head of the chicken family. He importantly walks around the yard and looks at his possessions. And if two or more roosters live together, then you can’t do without a fight, because these birds do not like rivals.

In this modeling lesson we will tell you how to mold a bright poultry. And in parallel, we will offer you a way to dispose of mixed plasticine, which has already served its purpose.

Other lessons about pets:

Step by step photo lesson:

The plumage of roosters, at times, is full of iridescent colors. It is impossible to understand which color is the main one, and in the sun the feathers generally shimmer like mother-of-pearl. In general, for sculpting a rooster, it is better to use a mixture of shades, and several. For example, you can make red or orange the main one and add green, yellow, brown and others to it. In general, modeling a rooster from plasticine is a great way to use already damaged material. Surely, after the experiments of young sculptors, pieces of an incomprehensible color remain in the box. They are suitable for us for sculpting. Roll up the ball.

Attach a protrusion to the ball - the neck and head. For this, the same mixed red or orange plasticine is suitable.

On the top of the ledge, fasten the beak, eyes and a red beard under the beak.

For sculpting wings, plasticine of a similar shade is suitable or add more green to it. First, pinch off two servings from a piece, knead them in your hands, flatten them. Then press down on the sides with your fingers. You should get flat cakes, the shape of which resembles a drop. Draw a stack on the surface of the wings with many stripes.

Connect two flat parts with a voluminous body.

Make the tail in the same color scheme, which is the wings. Pull the mass into several oblong thin sausages. Assemble a bouquet from the prepared details. And before or afterward, strip the plates with a stack. Fluff up the top for a chic ponytail.

Attach the tail to its rightful place.

Next, you have to decide how to make the rooster stable. Thin paws can be made on the basis of matches or toothpicks. Take the halves, stick plasticine on them with a thin layer, and attach paws with three fingers to the bottom.

Attach the paws to the main craft.

So the bright rooster from plasticine is ready. You can make a chicken coop and put a rooster in it.

Highly great place in the development of any child is sculpting. Crafts can be made from plasticine, polymer clay, salt dough, gypsum. You can sculpt just for the sake of the process itself, or you can arrange a toy in the form of a fridge magnet, figurines on a shelf or Christmas tree decorations. For example, to blind a rooster, which with its multicolor will disperse boredom and monotony.

To create this craft you need:

plasticine of different colors;
modeling board;
plasticine knife, which can be replaced with improvised means.

First you need to sculpt the head and body of the cockerel. Take a small piece of plasticine of the desired color, for example, white, mold a ball from which to form a drop. A tail will stick to the thin end of the droplet. A rooster should have a comb on its head. Use red plasticine, make a “pancake” and shape the future comb with a knife or toothpick, stick it on your head. Take small black beads and make the eyes of a cockerel. From yellow plasticine, mold a cone, which should not be completely divided into 2 parts with a knife or toothpick. You get a beak, under which you need to make a red beard.

For the paws, take 2 orange plasticine triangles and give them the desired shape with a toothpick, stick to the bottom of the droplet. The legs are ready. For the tail, you can take plasticine of several colors, for example, red, green, blue, yellow. Having fashioned thin flagella, flatten them a little and bend them to get multi-colored feathers.

Salt dough crafts

Salt dough figures are durable, they can be used as a toy, figurine, souvenir, magnet or Christmas tree decoration.

For this craft, you first need to make the dough itself. It needs ingredients:

1 glass of flour.
1/2 cup extra fine salt, not iodized
1/2 cup water.
1 st. a spoonful of vegetable oil.
1 st. a spoonful of PVA glue.

Mix all dough ingredients. For better uniformity, you can use a mixer.

Salt dough rooster can be flat or voluminous.

For a flat picture or magnet, you can use a stencil, a mold for curly cookies, or sculpt all the details with your own hands. When the figure is molded, you need to decide on the purpose. If it is a Christmas tree toy, then before drying, you need to make a hole for the thread. Then let the toy dry in the open air for several days, not forgetting to turn it over. You can dry the toy in a warm oven. A completely dried figurine can be painted in the colors you like, and then varnished for a better look. safety and appearance. If it is a magnet, then stick a magnetic tape on the wrong side.

To create a voluminous craft, all the details must be sculpted in the same way as from plasticine. With the only difference: if you get a thick layer of dough, then the craft will dry for a very long time and may crack. To correct this shortcoming, large elements are first made of foil, paper, and then stick around thin layer of dough.

Chicken making process

To create the body of a chicken, you can use foil rolled into a ball or an empty egg shell. If you use the shell, then it should be clean and dry. Wrap the resulting ball with a thin layer of dough, remove unnecessary residues. Roll into a smaller ball to make a chicken head. It is necessary to roll out the dough scraps with a thin layer and cut out the tail, wings, beak and a small crest with any sharp object (knife, knitting needle, toothpick). Stick in place. Leave the figurine to dry completely, and then paint.

You can also initially make colored dough by dividing it into several parts and adding food coloring. Such a toy does not need to be painted, only varnished.

Figurine made of polymer clay

Polymer clay is an artificial material, plastic, convenient for modeling. Polymer clay or plastic is self-hardening and requires baking when high temperature. Plastic can be bought white or colored.

From clay, you can fashion a toy using the Dymkovo or Filimonov technique.

To sculpt a rooster in the Filimonov style, it is necessary to mold a cone from polymer clay. The narrow part will be the head of the rooster, and the wide part will be the tail. Tail flatten in a cake and a sharp object, you can make notches-feathers, bend the head to make a neck and breast.

Another cone will be the stand-legs of the future figurine. Make a comb, beak and beard on the head. All details fasten together more liquid clay. If the figurine is molded from self-hardening clay, then you need to let it dry for several days. Then proceed to painting the product.

In order to color a rooster in the Filimonov style, you must first apply White background, let dry and then decorate the toy using yellow, red and green. In coloring, gouache or tempera paints are most often used.

In the Dymkovo toy, great attention is paid to details. If the Filimonovo toy is more concise, then the Dymkovo figures in the process of modeling receive wavy decorations, folds, and frills. The modeling technique is the same as in the Filimonov figurines. The finished product needs to dry, and then a white background is applied to it and painted using the Dymkovo technique, which is characterized by circular motifs, wavy lines and multi-colored dots.

Attention, only TODAY!

Children's crafts / modeling

Cockerel from plasticine - detailed MK

1:508 1:518

In kindergarten, children often sculpt figures with their own hands from plasticine. This material is understandable and popular, bright pieces beckon to pick them up and knead, and then create different crafts. On the eve of the new year 2017, it is imperative to make a symbol - a fiery cockerel. The given instructions will be clear even to children, guided by the photo, it will not be difficult to repeat such an instance, and adults can read the clear instructions and help the pupils.

To sculpt a rooster, take the following:

1:1439

the brightest (fiery) shades of plasticine are yellow, red, orange;
plastic spatula;
crumb of black plasticine.

How to mold a cockerel - a symbol of 2017. Step by step master class

1. The choice of shades is dictated by the theme of the craft. Since the New Year 2017 is considered the year of the bright fiery rooster, among the bars there must be those that imitate the flame. It is also worth paying attention to the hardness of the mass. In kindergarten, it is better to use soft wax clay, as it is difficult for kids to knead large quantities of dense pieces.

2. From the yellow block, complete the torso, head with neck and shins of the poultry. Measure from the block plasticine portions about 1, 2 and 0.5 cm wide.

3. Cut the pieces to the length you need, cut the smallest in half.

4. Mash each serving and roll into balls.

5. Deform all balls. Press the largest ball on all sides, stretching it into an oval, pull the middle one into a sausage and turn two small ones into cones.

6. Stick the neck and head (oblong tubercle) on the oval body.

7. With a stack, mask the junction of the parts, thereby showing the bird's feathers.

8. Turn the uppermost protruding region of the tubercle neck into a rooster's head. Stick black crumbs - these will be eyes, add a small beak. It can be opened or closed.

9. Next, start creating the main pride of the cockerel - a high comb and beard. They should be sculpted from red plasticine. Make two small drops and a flat cake in a curved shape, cut the top of the comb with a stack.

10. Attach the red pieces in place.

11. Prepare orange plasticine for sculpting the tail and wings. Mark portions of 0.5 cm on a block.

12. Cut several pieces of the same size.

13. Make some curved parts in the form of worms - these will be blanks for feathers.

14. Gather the feathers into a bun to form the bird's tail.

15. Attach the cock's tail at the back.

16. Divide the remaining orange plasticine into two parts for sculpting wings.

17. Mash the mass and form leaf-shaped cakes. Slice one side of each pastry.

18. Attach the orange wings.

19. From below, add the drumsticks - yellow cones prepared at the initial stage.

20. To make the lower part of the legs - paws, prepare small orange triangles. Make a stack of fingers.

21. Attach the legs to the sharp ends of the lower leg.

craft for kindergarten ready. The New Year's cockerel must be hidden under the Christmas tree during the celebration, because in 2017 it will certainly bring good luck.

Plasticine is a wonderful material that is widely used in children's art to create interesting characters. It allows you to make a figure even with subtle and elegant details. Let's try today to mold a plasticine rooster - a symbol of the upcoming year 2017.

You can choose the colors of plasticine for sculpting a rooster yourself, or you can stop at those suggested in this master class.

For work we need:

plasticine 6 colors: yellow, red, black, white, green, purple;
2 toothpicks;
Scissors;
modeling board.

How to mold a rooster from plasticine, a master class

Let's take yellow plasticine and warm it in our hands so that it becomes more elastic and soft. We will form from it the body of an oval-shaped cockerel, slightly elongated with a corner, as in the photo.

From a white and black plate we roll up small balls and make the eyes of a bird. From a piece of red plasticine we will form a comb, give it a wave shape. Attach the details to the head of the rooster.

From plasticine white color we will make 2 small rollers and attach them in place of the beak. Also, the beak can be made from sharp cut pieces of a toothpick.

We roll up a drop of red plasticine and attach it next to the beak - we get a beard.

We remember the green plasticine well in our hands so that it becomes plastic and soft, and we will form the wing of a bird, resembling a flat drop in shape. Attach a cockerel to the body.

We roll up 2 green and 2 purple long sausages, bend them a little, make a tail out of them, attaching a cockerel to the body one after another and alternating colors.

Other colors of plasticine for making the tail can be used.

It remains to make paws for the rooster. We roll 8 small thin sausages from yellow plasticine, form fingers from them, attach them to 2 toothpicks (4 to each). Attach the toothpicks to the cockerel's body.

If you want to present such a plasticine cockerel as a New Year's gift, cover the craft with two layers of colorless varnish. For this purpose, you can use colorless nail polish or acrylic, which is used to create decoupage crafts.

Our plasticine cockerel is ready! It can be carefully placed on an open shelf, so that it pleases the eye and gives a positive mood.

Based on famous fairy tales: we sculpt a figurine of a cockerel from plasticine and clay / DIY toys, patterns, video, MK

Modeling is not without reason considered one of the most interesting and useful for fine motor skills classes. With the help of plasticine, polymer clay or dough, you and your child can create a whole world of your own images, besides, with plasticine or clay toys and figures it’s great to put on performances based on famous fairy tales or invent your own stories, but first you need to stock up on characters. A hero many cartoons and fairy tales is the Golden Scallop Cockerel. The child will surely like this bright and beautiful image, so prepare everything you need and start sculpting.

What do you need?

A rooster is easy to make from both plasticine and polymer clay or dough - the technique for making a toy is almost the same. You can first think with your child how the future cockerel should turn out or find beautiful picture with a picture of a rooster. You can also use special schemes or watch a video of a master class, which shows step by step and in detail how to mold a figure. If you chose plasticine as a material for work, then prepare some of its bright colors: be sure to yellow, red, brown, for tail feathers you can take green, and blue, and purple, and for the eyes - black and white.
It is best to sculpt on a special working board (if there is none, then take at least a piece of plywood or an ordinary kitchen board), you will also need a rolling pin to roll out blanks and a knife or stack (as a rule, it should come with plasticine). You can cut holes with matches or a pen, and wire or toothpicks will help you fasten the parts and stiffen them. Toys made of polymer clay or salt dough will still have to be fired, and then painted with acrylic paints or gouache (or take colored material right away) .If you wish, you can mold a rooster using some famous technique, for example, make a Dymkovo or Filimonov toy.

We sculpt a cockerel from plasticine

The easiest way is to make a flat figure on paper. To do this, lay out the torso of the rooster from yellow plasticine (a small deformed oval with a bend, so that the head is on top). Then attach three small red plasticine balls to the head and form a comb out of them. From two red triangles make a beak, also add a beard. Roll out the red material into thin flagella and attach the paws to the body. Add a small black dot - an eye and a yellow oval on the body - a wing. From four different colors, form voluminous stripes and lay them one next to the other in the shape of a semicircle so that they form a chic tail of your rooster.

To mold a voluminous toy, first make a blank of the body - roll up the yellow ball and bend it slightly (you will get a kind of cucumber). However, the cockerel's body can be pear-shaped or egg-shaped. Further, the manufacturing scheme will be the same as for flat figure. From three small red balls form a scallop, from a thin orange sausage folded in half - a beak, and from two white and black tiny balls - eyes. The wings can be made as follows: you need to flatten two pieces of a cylindrical shape so that they make elongated cakes, then slightly bend them (in an arc) and place them on the sides of the bird. For the tail, make three sausages of different colors and connect them at one end, bending in a semicircle, and then attach the cockerel to the body. Paws are made from two cakes. For greater resemblance, apply thin notches on them with a match. Set the body on the paws.

Instead of paws, you can mold a stand. If you wish, you can add other details: draw feathers on the wings or make stucco patterns, decorate the cockerel's neck, etc. In the same way, a rooster is molded from colored salt dough (if you take the usual one, then you will need to color the figurine).

Making a cockerel out of clay

See how you can mold a Filimonov clay toy ( hallmark of these figurines is that they are made like whistles, but cockerels and turkeys are an exception, since they do not whistle).

Take a piece of clay and divide it into three parts - for the stand, for small details (beards and comb) and for the main part of the figure.

Roll the largest - the main part into a carrot. The future appearance of your product depends on what dimensions and parameters it will be.

Bend this workpiece in the middle at a right angle. Where the part is thicker, there will be a tail, and from the sharp part it is necessary to form a head with a beak. If cracks appear at the folds, smooth them with wet fingers.

Squeeze the thickened end a few times to get a big flat ponytail. You can trim it with a knife.

Make a comb from a small round cake, cutting it in half - just grease the head of the figurine with slip (this is liquid clay that is used to hold the parts together - mold a bowl of clay, pour some water into it and stir with a brush) and press the comb firmly.

Roll up the beard from a small ball and attach it under the beak.

For a stand, mold a cone of clay. Then insert a pointed stick into its base and roll it on the table to roll out the cone from the inside. When ready, put the cone on the paper and attach the figurine to the slip on top.

Products need to be dried for four to five days, and then burned in the oven (at a temperature of about 1000 degrees).

Then the figures are painted (gouache is taken with the addition of PVA glue or acrylic).

Dymkovo toy is another famous folk craft. These products are created in a single copy and do not have mass production. Try and do such a thing self made based on the motives and experience of the Dymkovo masters.