Ideas for creating bird feeders from improvised materials. Unusual do-it-yourself bird feeders Do-it-yourself bird feeder for children

Bird feeders- a functional children's craft that will teach children to take care of nature and its inhabitants. At any time of the year, while walking in the park, children always feed the birds with seeds or bread crumbs with great pleasure, watch them and shower their mother with questions about what kind of birds they are and what else they like to eat. When winter comes, it is not easy for birds, because it becomes more difficult to find food for themselves under a layer of snow, and at this time it is especially important to feed them. The kids will be very enthusiastic about the idea of ​​creating a feeder.

DIY bird feeder

For example, wooden do-it-yourself bird feeder is a task for a real master carpenter who knows how to work with wood and special tools, but fortunately there are simpler materials that will help you make a very useful craft - a bird feeder. You can make it using an empty tetra pack, a cardboard box or a plastic bottle, as you can see, these materials can be easily found in every home. You may not really like the idea with cardboard, because under the influence of weather conditions this material will quickly deteriorate, so plastic is rightfully considered the most affordable and practical material. You can use 2 liter bottles or 5 liter eggplants.

In a harsh snowy winter, the birds that stay with you for the winter especially need support, because now they do not have the opportunity to get their own food in the fields, pick up crumbs on the ground - everything is covered with snow. The feeder consists of two parts: the lower container, where the seeds are poured, and the roof, so that snowflakes do not fly inside and rainwater does not accumulate.

If you are at a loss as to which one is better bird feeder, photo you can see on our website. By the way, with the help of such crafts from waste material, you can expand your child's horizons, because by hanging a feeder in the courtyard of your house, you and your children can watch the feathered guests and study them.

Remember that metal elements cannot be used for the structure, it is not recommended to make gratings from them, because at low temperatures they will become dangerous for feathered guests. If you are doing it from a tree, then make sure that nails do not stick out anywhere, there are no points.

If you decide how to make a bird feeder from a tetrapak, then first it must be washed and dried, then holes should be cut, and it is not recommended to make holes opposite each other, because the wind can blow away the seeds. Holes can be cut on two adjacent sides. To make the structure stronger, you can insert wooden sticks into the corners. You can hang the feeder on a tree using a wire or a thick thread that must be threaded from above. Using a wire, you can fix the structure on a tree trunk.

How to make a bird feeder

We have considered how simple options can be do-it-yourself bird feeder photo, and now we need to dwell on the question of what can be offered to feathered guests for dinner. After all, some food can be harmful to birds, for example, you can’t treat them with spicy or salty food, you know that titmouses love to eat lard, but you can only offer them fresh lard. It is also not recommended to give birds black or rye bread, as it can ferment in winter, but white bread crumbs will perfectly complement the diet of birds in winter.

Birds will also rejoice at cereals, you can mix a variety of: oatmeal, corn and wheat chaff, millet. For birds, rowan berries will be a real delicacy. If you decide to pour sunflower seeds on them, then they should be raw, not fried and not salted, you can pre-crush the seeds a little.

You can also worry about the health of birds, and so that they do not experience calcium deficiency, you can add crushed eggshells or crushed chalk to the feed. You can also use parrot food that is sold in pet stores, it is affordable, so you can sometimes spoil the birds with such a balanced diet.

Original bird feeders, of course, will become a real decoration of your backyard, or you can make ordinary beads, string berries, nuts, bagels, slices of dry bread on a thread and hang such garlands on a tree in the yard. You can make these with your children, the children will be happy to string rowan berries on a string.

If the weather is frosty outside, then you can cook a “pie” for feathered gluttons: for this you need to melt margarine in a bowl, mix it with grains, seeds, berries and other cereals, and then let the mixture harden in any mold. Such a "pie" can be hung on a branch or attached to the wall of the feeder. Sometimes seeds, berries and dried fruits are mixed with a little water and frozen in a mold, and then the finished "ice" is hung in the garden. You can also make sticks, like those sold in pet stores, the seeds can be fixed on any stick with flour glue. Birds can get the necessary calories from a piece of lard, only the lard must be fresh.

Bottle bird feeder

The simplest option is bottle bird feeder, even a schoolboy can do it, and one of the parents can help a preschooler in this task. Cut out the side of the bottle and hang it from a tree. You can also use milk or juice bags, they are made of cardboard, which is resistant to moisture. In addition, such packages have an optimal shape for the simplest feeder, it just needs to be slightly modified.

In addition to the juice bag, which must first be washed and dried, you will also need twine and a sharp clerical knife. To make a bright and original feeder from such a package, you can also use self-adhesive film or multi-colored printed tape. With these materials, you can glue the package, and then proceed to the next step. The original drawing can also be applied using a stencil and paint.

A wooden feeder will fit perfectly into the landscape of your garden, however, you can either buy it or make it yourself from plywood sheets using special tools - and this is already a task for a real master, so you can use small thin twigs with which you can glue the surface of the package and make them decorative roof. Children can be involved in this process, they will be happy to participate in the creation, and when the birds arrive for a treat, the children will be able to watch them.

After you cut a hole on one side, to strengthen the edges, you can glue it with self-adhesive or electrical tape, thanks to this move, the edges will no longer be sharp, and the bird will not be able to get hurt. The hole can be square, cut on one side, or you can cut it on the corner. To maintain the strength of the bag, you can make a triangular hole. Holes should be on both sides. Through the package, you can insert twigs or Chinese sticks, securing them with tape. At the end, you need to thread the twine in the upper part and hang the structure on it

Bird feeders

You can use the master class if you have any cardboard box at hand, all you need to do in advance is to paste over its walls with adhesive tape or self-adhesive film. But the cardboard should be thick enough, for example, you can use a shoe box. You will also need a lid: it must be lifted above the main box, where you pour the food. You can use pieces of wire to lift the lid. In the middle on the lid, you need to make a hole, thread the twine and make a loop. This loop can be used to hang the feeder.

You also need to resort to another tricky move: put a duplicate sheet of cardboard on the bottom, which can be wrapped with cling film. You can also use a plastic pallet, thanks to which your craft will last a long time, and the bottom will not soften.

They should be not only functional, but also beautiful, because they will be a real decoration of the playground. Even if you are making them from waste material, it would be useful to decorate it with paints, jute cord, buttons, ribbons and stickers, or you can use various natural materials.

Original bird feeders

Plastic bird feeder containers are the most affordable option, besides, with the help of a small plastic bottle you can make an uninterrupted feed supply system, so even if you forget to add seeds, your feathered guests will not go hungry.

Such plastic bottle bird feeder and two plastic spoons, you will also need a string and scissors. It is advisable to choose a container with a wide mouth and a wide lid, for example, from under juices. Poke two holes in the lid with a pair of scissors. Thread the string through the holes and tie it into a knot. This design is easy to hang from any branch or on the porch of the house.

Also, such a design allows you not to worry that the birds will remain hungry, because as soon as they peck at the food offered to them, the stand will automatically be filled with seeds. To replenish stocks, you just need to unscrew the lid and pour more mixtures of cereals into the plastic container.

At the bottom of the bottle, two holes must be made opposite each other, one is a little larger, the second is small. Insert a spoon into these holes, it should be slightly inclined so that the wide spoon itself is slightly lower than its edge. To fix the spoon in this position, you can use plasticine, which can be attached to the bottle from the outside, seal the hole with it, from where the edge of the spoon comes out.

A little higher, you can make two more holes opposite in the same way, and insert a spoon into them. Original do-it-yourself bird feeder is already ready, and the spoon must be inserted into it so that the feed from the bottle is poured onto its base.

After observing the birds, you can do various crafts with children - or from felt.

From this article you can learn how to make do-it-yourself bird feeders: an overview of existing types of structures and general recommendations for their creation and placement, the choice of suitable building materials, photos and drawings with a detailed description of the technology. The text contains unusual and original solutions that will allow you to create a comfortable and beautiful area for feeding birds in the garden or near the house.

If you want to ennoble the area near the house, many owners of summer cottages lay paved paths, break flower beds and flower beds, install benches and lanterns. All this creates comfort and coziness for the residents of the house. However, do not forget about the small inhabitants of the garden, for whom, with the advent of winter, it becomes more difficult to get their own food.

Making a bird feeder with your own hands will not only help the birds overcome this difficult period, but also add a certain charm to the garden. Using simple technologies, you can show your own imagination and create an original feeding house.

Advantages of homemade feeders:

• the opportunity to take care of the birds, which are difficult to get their own food;
• decorative decoration of the yard;
• the opportunity to instill in children a love for the world and birds.

Moreover, such a decision can be implemented not only by owners of private and country houses, but also by residents of city apartments.

Is it profitable to buy a ready-made bird feeder: advantages and disadvantages

If you want to install a standard feeder made at a professional level in the yard, you can order the product from specialists. Experienced craftsmen will independently select high-quality materials and produce a structure using special technologies.

Customers are invited to choose a bird feeder with their favorite design from the picture. Such structures can be of any size and shape. Buying a feeder to order, the consumer can be completely sure that it will meet his wishes and fit perfectly into the exterior of the yard.

Buying ready-made products comes with both advantages and disadvantages. The negative aspects of this include the high cost of professionally made feeders. In addition, the buyer deprives himself of the joys of the creative process and waiting for the arrival of birds. Therefore, many people prefer to create houses for feeding birds on their own in their yard or at the window.

Note! The design of the feeder must be reliable, so it is advisable to select practical and durable materials for its construction that will protect the birds from precipitation and wind.

What requirements should a homemade bird feeder meet?

When choosing a specific design for a homemade feeder, you need to take into account not only the type of birds for which the design will be made, but also other nuances. Birds rely mainly on their eyesight, so the spread of food must be visible to them from afar.

The design of the structure must be such that the grain is not covered with snow and not blown by the wind. High sides and a roof will help to cope with this problem. It is unacceptable for moisture to get on the feed. Otherwise, the grains will become moldy and spoil. It is desirable that protection against chipmunks and squirrels be present. At the same time, the birds should not experience any difficulties when retrieving food.

Drawings of bird feeders, of which there are many on the net, can be successfully used as a visual aid for creating a beautiful design. First of all, you should pay attention to practical and convenient options. The food should not wake up on the ground, otherwise it will attract small predators such as stoats, weasels, ferrets. Their presence poses a direct threat to birds.

If the structure will be used for temporary top dressing in winter, it is better to hang it. Thus, the feeder will attract less sparrows, which are much easier to find food than other birds. Stationary structures are used for constant feeding. In this case, the presence of protection from predators is mandatory. It is desirable that the grain is on a flat area of ​​a sufficiently large size that maintains good stability.

Types of bird feeders: photos and descriptions of designs

The design of homemade feeders is practically unlimited. The main thing is that the design meets the basic requirements of practicality, reliability and safety.

Classification of bird feeders by type of design:

• suspension;
• area;
• house;
• bunker;
• tray;
• peeler.

Each of these designs has its own characteristics and is designed for certain types of birds.

Original do-it-yourself bird feeders: photo of hanging structures

The suspension structures are very simple. In this case, the food is suspended in a mesh case or on a thread. They are used primarily as feeders for titmouse. Although other species of insectivorous birds, with the exception of woodpeckers, can also use suspensions.

The most common version of top dressing - "antifreeze" - a piece of fat without spices and salt. There are also more nutritious mixtures that are designed for shelling birds. For them, a ball consisting of seeds is suitable. As a fastening component, peanut butter or lard (internal fat) is used.

Note! It is not necessary to cast the feed mass into a beautiful shape or a plastic cup and then freeze it. The ball is more comfortable for the birds. So it is much easier for them to cling and they do not have to spend a lot of energy to keep themselves on weight while eating.

A ball consisting of feed mass is most conveniently formed by hand. This must be done in the cold. Fat will harden very quickly, therefore, having formed a ball, it must be hung immediately.

Related article:

Drawings, interesting and practical solutions for creating fences in the conditions of the street and apartment, taking into account the breed and size of the animal.

Hanging craft bird feeders can be made with the expectation of certain types of birds. Great tits prefer garlands made from dried berries. They especially like rose hips. The use of peanuts in pods is allowed.

Swing feeders will be the best option for blue titmouse. In this case, it is desirable to hang the balls on elastic and thin branches so that they balance.

Beautiful do-it-yourself bird feeders made in the form of mobiles or movable sculptures look original in the photo. Such designs are able to attract even large tits, which will not conflict with blue tit.

Hanging options from cones are suitable for attracting bullfinches, peeling birds and waxwings. To make the feeder visible from afar, you can hang a bright bunch of mountain ash or viburnum on it. It is advisable to use a fertile cone for this. If this is not possible, any with ruffled scales will do. It must be doused with peanut butter. After that, food is placed between the scales and the cone can be hung. Such cones may even appeal to crossbills.

Paper cannot be used to create such structures, however, you can make a beautiful bird feeder with your own hands from a dense base from a toilet paper roll. It is advisable to attach bright pieces of fabric or paper from below that will attract the attention of birds.

Convenient do-it-yourself bird feeders: photos of tray structures and platforms

Feeders-platforms are a flat plane on which food is placed. The advantage of such designs is that birds can see the presence of food from afar. However, a do-it-yourself flat wooden bird feeder also has disadvantages. Firstly, there are no fences that provide protection from the wind. As a result, the food in large quantities swells and wakes up. Secondly, nothing prevents sparrows from actively using these feeders.

The fact is that sparrows keep in flocks. These sneaky birds, unlike pigeons and crows, can freely enter small feeders and empty them, not giving a chance to other birds, which are much more difficult to get food in winter. To eliminate this possibility, it is desirable to avoid the use of open structures.

Sparrows are very careful. In case of danger, they take off straight from the place steeply upwards. Therefore, the best option would be a birdhouse made of cardboard or wood with a steep roof that has more overhangs. It is desirable that the design has low windows that provide birds with access to food. In this case, the sparrows will first have to flutter to the side before flying away, so such feeders are unattractive for them.

Useful advice! In winter, the birds will not interfere with vitamin supplementation. To do this, you can put pear and apple cores with seeds, viburnum berries, elderberries, mountain ash, the fibrous part of a pumpkin with seeds, dried rose hips, and grape seeds into the feeder. It is allowed to use cherry pits from compote.

For those birds that constantly live on the site, an original do-it-yourself tray-type bird feeder made by yourself is suitable. In front of the tray (a window that provides access to the feed), you can install a perch or a landing pad.

Tray feeders are of two types:

1. With free access to the mixture.
2. With automatic feeding in the tray.

A bird feeder on a window with automatic feeding is much more practical than bunker structures. In this case, the food practically does not wake up. Tray structures are designed specifically for one type of bird. The possibility of using a feeder for several varieties of birds is allowed. However, to create such a structure, not only the appropriate skills and tools will be required, but also ornithological knowledge.

Do-it-yourself feeders-houses: photos of birdhouses and similar structures

Feeding troughs in the form of houses well protect food from snow. Equipping the structure with a roof, you can protect the inside from the wind and sparrows. But a beautiful bird feeder in the form of a house does not provide protection against spillage of food. Therefore, only those birds that are accustomed to feeding will be present on the site. For forest birds, this option is very inconvenient, because they are drawn to human habitation only in cases of crisis and may simply not notice the grains that have woken up on the ground.

A design in the form of a house with a sloping roof can be made from a box. If possible, it is desirable to treat such a cardboard feeder with a diluted adhesive. For this, PVA is suitable, which is mixed with water in a ratio of 1: 3 or 1: 5. Supports are made of sticks, which are also attached with glue. If everything is done correctly, such a feeder will last several seasons. The design is nailed to the tree.

A beautiful pitched roof feeder is the best option for strong large birds. These include Nutcrackers, Waxwings, Jays and Pigeons. All of them can safely sit in a row while feeding, so it is better to equip the dining room with a long perch.

Wood or very dense pre-treated cardboard can be used as a material for manufacturing. The design for large birds should be much larger than for ordinary pichugs. In this case, you need to select drawings of feeders for birds with dimensions that will correspond to them.

Note! A bird feeder from a shoe box is not suitable for feeding large birds. Cardboard in such designs is very thin. Strong birds will break the feeder very quickly during feeding.

Practical do-it-yourself feeders: photos of bunker structures and hullers

Hopper type designs will be the best option if an anti-sparrow feeder is required. In this case, the feeding area is limited in size, so the entire flock will not be able to accommodate. Sparrows will have no choice but to eat in turn with the company of other birds.

Unusual bunker-type bird feeders can have a different design. It is desirable that the product, designed for small spotted woodpeckers and tits, be equipped with a solid narrow platform. Anti-sparrow variants are much wider and have a roof. Modern materials allow you to create a bunker structure in just 5 minutes.

To make a bottle feeder with your own hands, you will need a minimum set of tools and materials:

• kapron thread;
• bottle (PET);
• Super glue;
• plastic plate;
• large needle;
• knife and scissors.

Plastic is a very practical and durable material that is not afraid of moisture and frost. This feeder will last for several seasons.

Peeler feeders are less popular. They are designed for certain types of birds. In this case, the feed is held with a special metal mesh. The design can be improved by making it combined. For this, the feeder-sheller is combined with a tray option. Due to this, birds of different species can coexist in one area.

How to make bird feeders: the choice of materials for work

Having decided on the type of future design, you need to decide what the feeder will be made of. For these purposes, you can use a variety of materials. Everyone has many of them at home, so you can not only create an original bird feeder with your own hands, but also do it at minimal cost.

The following materials are commonly used to make a bird canteen:

• plastic;
• paper and cardboard;
• wood;
• plywood;
• improvised materials (bottles, boxes, milk or juice bags, etc.).

Each of these materials is suitable for creating certain types of structures and has both advantages and disadvantages.

Features of bird feeders from plastic bottles and trays

Plastic feeders are the most popular option. This material has many advantages.

Advantages of feeders from plastic bottles and trays:

1. Material availability.
2. The transparent walls of the structure allow you to make the food visible from afar.
3. Ease of processing.
4. Minimum amount of garbage and waste.
5. There is no need to use special tools.
6. High strength and durability.

Important! The roof of a plastic feeder in the form of a house should be opaque or at least matte. In case of danger, birds may not notice the transparent plane from above and hit it.

A good way to create a small, eye-catching bird feeder out of scrap materials is to use old childhood toys like building blocks. They are made of polyethylene, so it is advisable to use superglue for fixing. Such designs have bright and rich colors, so it will be easy for birds to find food. Polyethylene lends itself well to processing. To cut round holes in the walls, you can use a compass with two needles. Polyethylene is a slippery material, so it is advisable to equip the feeder with a perch.

As a plastic building material, you can use scraps of transparent polycarbonate that could remain after repairs in the house. Such a feeder can be fixed on the window with the help of suction cups from the bathroom shelves.

Bird feeders from bottles and other unusable containers deserve special attention. The main thing is that the design is well thought out. To ensure the visibility of the feed, it is desirable to use a wide tray. The presence of a perch will make feeding birds more convenient. If you take a large tray and a capacious container, you will not have to frequently replenish food supplies. As a result, the birds will be less shy.

To make a do-it-yourself bird feeder from a plastic bottle, it is advisable to use a trough-shaped tray. In this case, spillage of feed will be negligible. If you bend up the cover of the hatch that provides access to the feed, the feeder will turn out to be anti-sparrow. In this case, the plane that forms at the top can be used to place vitamin supplements.

Features of making homemade feeders out of the box

• milk;
• kefir;
• juice, etc.

Despite the fact that these bags are made of cardboard, their walls are covered with a film on both sides. Therefore, laminated feeders are able to withstand one winter.

Small packets left over from juice or milk are ideal as feeders for the following types of birds:

• goldfinches;
• tits;
• granivorous.

In this case, it is imperative to install a perch stick to make it easier for the birds to get food.

Useful advice! To attract a small motley woodpecker to the titmouse feeder, it is enough to fix a wooden circle on the bottom of the valve. So it will be easier for the bird to gain a foothold on the structure.

From large packages, you can make universal canteens for birds. To do this, you need to cut a large opening so that the food can be seen from afar. If the feeder is suspended, it must be pierced with a perch. A construct from a package can be placed in a bush. In this case, the perch is not required, its function will be performed by branches.

Eco-friendly bird feeders made of wood

The advantage of wooden feeders is their durability. Most often, such structures are stationary.

As a protective treatment, you can use:

• drying oil;
• water-polymer composition;
• mixture in the form of diluted PVA glue.

To build a bird feeder made of wood with your own hands, you will definitely need a carpentry tool and skills in handling it. Traditional models look like a house. It is not recommended to make a flat roof on the feeder, since in this case the feed will be exposed to weathering.

Standard design options in the form of a house, with minor changes, can be improved and specialized for a certain type of bird. For example, a gable roof feeder without railings can be used as a public option. If, however, a small crate is built around the perimeter, such a dining room will be to the taste of shelling birds. It quite realistically imitates natural feeding conditions. A similar model with a continuous low fence will achieve an anti-sparrow effect and protect the food from the wind.

A low pitched roof design will also provide protection from forage bloat. Such a feeder will be used by sparrows only as a last resort.

An alternative option for a suspended structure made of wood is a do-it-yourself plywood bird feeder. To create it, you will also need wooden bars with a section size of 3x3 or 3x4 cm. To avoid the use of lumber, you can make bars from plywood strips by gluing. However, for stationary feeders on poles, it is preferable to use solid wood, since plywood will delaminate in outdoor conditions in a few seasons, regardless of the quality of the protective impregnation.

Useful advice! If birch waterproof sheets are used to build a plywood bird feeder, you can get a reliable and durable construction. This material perfectly tolerates the conditions of street use.

DIY bird feeders from improvised materials

From improvised materials, you can make unusual and original designs, the creation of which can focus on design or functional features.

A cob of corn can be used as a feeder. To do this, a nail is passed through it. This version of the bird feeder from improvised materials can simply be hung or made part of a stationary structure. Corn should be hard, preferably oilseed or fodder varieties. The smaller the grains, the better.

It is better to refuse the use of table sugar cobs, as they are harmful to birds. Their grains contain a large amount of sugar and starch. The corn feeder is designed for large frugivorous and granivorous birds, as well as hullers.

Ice cream sticks can be used as a building material to create a wooden bird feeder. During the summer season, they can be accumulated in sufficient quantities. To make such a design, you will need a rope and PVA glue. On each side of the feeder, you can install a stick of larger ice cream sticks. Thanks to this, 4 birds can use the dining room at the same time, for example, chickadees or siskins.

An excellent option would be a wicker basket-shaped feeder with a hanging lid. To create it, you will need paper tubes that can be made from old newspapers. The weaving technology is rather complicated and time-consuming, so not everyone decides to take on the construction of such a feeder, but the result exceeds all expectations. To prevent paper straws from deoxidizing, they must be treated with a protective compound (glue and stain).

A large metal tin can is also suitable for building a feeder. It is suspended on a rope in a horizontal position. To prevent the feed from waking up on the ground, it is necessary to install a small damper. For this, the upper part of the lid, bent in half, is suitable. Be sure to install a perch.

Important! Regardless of the type of construction, the feeder must be safe. Wooden models must be carefully sanded and all sharp corners rounded off. Metal options can be wrapped with twine, which sits on glue.

Making bird feeders: drawings, descriptions and technologies

Having decided on the type of construction and material, you can proceed to the direct manufacture of the feeder. It should be noted that not all types of grains are suitable for feeding birds. The favorite food of birds that remain for the winter is the seeds of wild grasses. It is desirable that these were burdock plant species. Turnip seed is suitable, which can be collected in the summer or purchased ready-made at a pet store.

Homemade feeders can be filled with:

• oats and millet;
• small sunflower seeds (not roasted);
• hemp and flax seeds;
• dried pods of acacias living in the middle latitudes (wisteria, honey locust, sophora, etc.);
• pumpkin seeds;
• dry pea pods (it must be ripe and firm);
• pine nuts;
• millet (in small doses);
• seeds of such deciduous trees as ash, hornbeam, linden, maple, alder;
• acorns and seeds of coniferous trees, for example, beech nuts, ruffled cones (if the feeder is designed for stubblers).

Note! Rye, wheat and bread are not allowed. They are harmful to birds. Moreover, black bread is the most dangerous, because it causes inflammation of the goiter. Poorly perceived strongly swelling cereals during cooking, for example, buckwheat, pearl barley, rice. The peel of any tropical fruit and citrus is deadly to birds.

How to make a birdhouse with your own hands: assembling a wooden structure

To build a wooden birdhouse, you will need skills in working with carpentry tools.

To work, you will need the following materials:

• wooden beam for racks (2x4.5 cm);
• plywood square as flooring on the bottom (25x25 cm);
• wooden pieces for the construction of the roof (22x35 cm, 2 pcs.);
• fasteners (adhesive composition, self-tapping screws, nails).

It does not hurt to first find a suitable drawing of the feeder, which will help you navigate during the assembly of parts.

First, the base is assembled: sides and bottom. To do this, the bars, pre-cut in accordance with the size of the bottom, are glued from the end sides and fixed to the screws. The result is a wooden frame. A pair of sides running in parallel must be made about 5 cm longer than the bottom. They will be used to install the perches. With the help of nails, the bottom is nailed to the frame.

At the next stage of making the feeder do-it-yourself racks are mounted from wood. In order to fasten the corresponding parts from the inside of the box. The optimal length is 18-20 cm.

A truss system is attached to the racks. To do this, you need to connect a pair of bars at a right angle. To strengthen the place of fixation, the joint is fixed with a piece of timber. The result is a right angle with equal sides. According to the drawing, it is necessary to make two such parts.

Useful advice! In order to properly connect the parts of a bird feeder made of wood, when fastening the bars, you need to lay the flat wide part on the table. After that, an additional element is attached from above at an appropriate angle.

Then the rafters are attached to the racks with self-tapping screws. Next, the roof slopes are installed. To do this, two wooden elements are installed on the rafters. If a wooden corner is available, you can make a skate. A bird feeder made of wood needs a perch. To do this, sticks or a window glazing bead are glued between an elongated pair of sides.

This design can be both stationary and suspended. It can be mounted on a pole or, by making a couple of holes in the ridge, hang it on a wire.

How to make a do-it-yourself bird feeder out of wood: plywood construction

An alternative option for a wooden feeder would be a construction made of plywood.

The material allows you to choose any modification:

• open;
• with a gable or flat roof;
• with bunker.

Plywood is a wood-derived material that is much cheaper and lighter in weight. Before you make a bird feeder out of wood, you must definitely select the appropriate drawing. In this case, it is necessary to take into account the type of birds living in the region. Large birds such as magpies, pigeons and jays can eat all the food, leaving small birds without food. Therefore, if the feeder is designed for tits, the openings should be such that large species cannot reach the grains.

To work, you will need the following tools and materials:

• jigsaw;
• sandpaper;

• water-based adhesive;
• nails and hammer;
• plywood sheet;
• timber with a section size of 2x2 cm.

In accordance with the drawing, markings are applied to the plywood sheet. After that, all the details are carefully cut out with a jigsaw. A square element 25x25 cm will be used as a flooring for the bottom. For the construction of the roof, you need to take larger parts, otherwise moisture will drain onto the feed. The edges of the resulting blanks must be sanded.

From the timber you need to cut 4 racks 25-30 cm long each. If the structure will have a shed (flat) roof, a pair of bars should be shortened by 2-3 cm. The cut is made at an angle. All joints of parts are treated with an adhesive composition, after which they are fastened with nails. Racks are installed on the bottom, and sides are fixed to them. A roof is installed at the top of the racks. The design can be installed permanently or suspended using a hook and hardware.

Useful advice! If the wooden feeder will be varnished, it is recommended to use a water-based compound for this so as not to harm the birds.

How to make a do-it-yourself feeder: a hanging grain structure

Suspended grain structures are the easiest option. Such a design can be made in a few hours.

For work you will need:

• raw bird food;
• oat groats;
• egg;
• gelatin;
• flour;
• needle and thick thread;
• thick cardboard and scissors;
• pencil and molds for filling.

How to make an edible bird feeder with your own hands:

1. Draw on the cardboard the figure you like, for example, a square, a circle, a triangle, a heart, etc.
2. Cut out the shape according to the markup.
3. Form a fastening by threading a needle and making a hole.
4. Prepare the glue mixture. To do this, the following ingredients are mixed: 1 tsp. honey, egg, 2 tbsp. l. oatmeal and a small amount of flour.
5. Leave the mixture for half an hour.
6. Apply adhesive mass over the cardboard base.
7. Mix grain feed with glue mass.
8. Apply the resulting mixture to the cardboard base.

After that, the grain feeder should be placed in the refrigerator for several hours. When the mixture hardens, the products can be hung on tree branches in the yard.

There is another technology for making edible feeders:

1. Dissolve gelatin packet in warm water.
2. Pour food into it.
3. Divide the resulting mass into molds.
4. Insert thread for hanging.
5. Send the molds to the refrigerator for several hours.

After hardening, the feeders are completely ready for use. To make it easier for the birds to grasp, the molds can be placed in bright mesh bags.

How to make a bird feeder from a plastic bottle

In every home there is an unnecessary plastic container. Therefore, many are thinking about creating a bottle feeder. The material is cut with scissors or a knife, and the design is transparent and very light. This option is especially convenient, as there are several ways to create plastic feeders.

How to make a plastic bottle feeder:

1. A pair of holes are cut on both sides of the bottle. They should be symmetrical. The shape can be any: arch, square, circle, rectangle.
2. Jumpers must be left between the holes.
3. You can make a rain visor by making an inverted U-shaped slot and bending the plate up.
4. The lower edge of the slots where the birds will land must be secured. To do this, the cut is covered with fabric insulating tape or adhesive tape.
5. At the bottom you need to make symmetrical holes.
6. A perch stick is inserted into the holes obtained.

Such a feeder can be fixed on a tree. To do this, the jumper is wound with a rope, tape or other material.

Useful advice! If you insert twine from a bottle through the birdhouse lid, having previously made holes in it, you can form a loop that will allow you to hang the structure on a tree branch.

Do-it-yourself bunker feeder from a plastic bottle

The bunker design is very rational. It allows you to fill up the feed mixture with a margin for several days. As the birds eat the grains, the additive will automatically flow onto the tray.

To work, you need a couple of bottles of the same capacity. One container is marked with a marker. Near the bottom, it is necessary to make holes similar to those made in the previous version of the plastic feeder, and then remove 1/3 of the bottle (top).

A pair of symmetrical holes is made in the upper part. They will be used to hang the feeder with ribbons or twine. The second bottle will store the food. In the narrowest part of this container, several holes should be made through which the grains will spill. Don't make the holes too big. If necessary, it is better to expand them later.

The corresponding bottle must be filled with the feed mixture, screw the stopper in it and place it inside the container, which is cut off by 1/3. After that, twine is pulled through the holes, and the structure is hung on a tree.

How to make a bottle feeder: the simplest design with a spoon

There is another version of the bunker design - a feeder with a spoon. For this, a bottle with a capacity of 1.5-2 liters is suitable. First you need to make a hole in the cork and stretch the twine through it. With it, the structure will be suspended on a branch. Then you need to make holes symmetrically (one on each side of the bottle). They should match the size of a wooden spoon.

On the side where the deep part of the spoon will be placed, the hole needs to be slightly expanded so that it is convenient for the birds to pick up food. It remains only to fill the feeder with the selected feed mixture and hang it in a convenient place.

Useful advice! To prevent the hopper feeder from accumulating moisture, several holes must be made in the bottom. To do this, you can use a small nail or a hot needle.

How to make a bird feeder from a 5L bottle

Water bottles with a volume of 5 liters can hold much more feed than standard containers. In addition, the large size of the container allows you to make several holes, so that a large number of birds can feed at the feeder at the same time.

For work you will need:

• wire or tape for hanging;
• clean bottle;
• birdseed;
• a cutting tool, such as a pruner, scissors or a clerical knife.

First, a hole is made for hanging the structure. Its location will depend on the nature of the placement of the feeder on the tree:

1. Horizontally - a pair of wide holes is made (one near the neck, the other - from the side of the bottom).
2. Vertically - with an indent of 5-7 cm from the bottom of the bottle, it is necessary to cut 3 rectangular holes or several square ones.

It is most convenient to hang the bottle by the neck. If the structure is fixed in a horizontal position, two holes must be made in the wall and, after passing the twine through them, fix the feeder on the tree. Plastic structures are very light. To prevent the bottle from being swayed by the wind, before filling it with food, it is advisable to put ¼ of a brick on the bottom.

Technology for creating a bunker feeder from a 5 liter bottle

To create a bunker feeder, you will need several bottles (5 l - 1 pc., 1.5 l - 2 pcs.), As well as a clerical knife, a rope and a marker. First, markings are applied to a large container. With the help of a marker near the bottom, a zone is marked where a hole will be placed that acts as a tap hole. It is best to make 2 small slots and one large one through which you can install a 1.5 liter bottle.

Then a U-shaped hole is cut upside down. The upper part should be bent to make a protective visor from the rain. The lower edge of the opening is sealed with adhesive plaster so that the birds do not get hurt during feeding.

In those areas where the bottle placed inside is in contact with the bottom of a large container, as well as in areas slightly higher, holes must be made. As the food is eaten, the grains will wake up through them. A round hole is made in the cap of a 5-liter bottle so that after screwing the thread, the neck of the inner container rises. Then, at the second bottle, you need to cut off the neck along with the top. The result should be a funnel. It should be put on the neck of the inner bottle and tighten the cork. The feeder is ready.

Useful advice! It is advisable to install the feeder under the roof so that the birds are more comfortable. For this, a canopy or gazebo is suitable.

How to make a feeder out of a box: a description of the process

A homemade bird feeder can be made from the simplest materials at hand. Almost every home has boxes of food, shoes or electrical appliances. For work, it is desirable to select thick cardboard. An ideal option would be a bird feeder out of a box with a laminated coating, which will increase the life of the structure.

The advantage of this method is that the box already has walls, a bottom and a roof. Therefore, the steps to convert it into a feeder will be minimal, you only need to cut holes in a rectangular or square shape on the sides.

To make a bird feeder with your own hands out of the box, you will need a clerical knife or scissors, cord and tape. Since cardboard is short-lived and vulnerable to moisture, it should be wrapped with tape for protection. This is done after the feeder is ready. When holes are cut in the side walls for access to the feed, you need to fasten the cord and hang the feeder. To prevent the structure from rocking from the wind, put a few pebbles or pour sand on the bottom.

You can slightly change the technology. In this case, the box lid is glued perpendicularly. As a result, it will serve as a feed stand. The second part of the box will replace the roof and railings. The design must be glued with adhesive tape.

Next, you need to organize a system of fasteners for hanging. To do this, a pair of hooks is made from wire. A piece of wire is bent in half and the end is pierced through the "ceiling" part of the feeder. After that, the wire is twisted and bent from the inside. Now the feeder can be hung on a branch.

How to make a feeder out of a juice or milk box

To create such a design, you will need a Tetra Pak bag from liquid foods, such as juice or milk.

List of necessary materials and tools for work:

• wire for hanging or nylon rope;
• a clean milk or juice bag;
• adhesive plaster;
• stationery knife or scissors;
• marker.

The feeder should be comfortable for the birds, so markings are applied to the cardboard and a couple of holes of sufficient size are cut out on opposite sides. Through space will allow the birds to easily move and take food. For safety reasons, the window must be pasted over with adhesive tape.

Under the slots, you need to pierce a hole with scissors and insert cardboard rolled into a tube into it. This will be a perch. The material for its manufacture can be taken from scraps left over from previous operations. In the corners you need to make small holes where a rope or wire will be stretched for hanging. A milk carton feeder can be tied to a branch or attached to a tree trunk.

Useful advice! To prevent the structure from swinging, it is better to cut the slots not on opposite sides, but on adjacent walls of the package.

The feeder can be made from two juice packs. The first tetrapak needs to be cut along the narrow side parts so that the top remains intact. 1/3 is cut off from the second package, and a hole should be cut on the front side. This area will be used as a stern board. The bottom of the second tetrapak must be combined with the first package. If everything is done correctly, you should get a triangle. To fix the parts, it is better to use glue, as well as winding with tape.

How to decorate a bird feeder with your own hands: interesting ideas

When the feeder is ready, you can start decorating it. In this case, everything depends solely on the imagination. The design of homemade dining rooms for birds is practically unlimited, the main thing is that all decor elements are environmentally friendly and safe for birds.

How to decorate the feeder with improvised materials:

• paint the structure with a coloring composition;
• decorate with weaving from ropes or twine;
• use materials of natural origin as decor, for example, moss, tree bark and branches, cones, acorns, chestnuts;
• decoration with colored ropes;
• use of chains with an unusual shape of links, etc.

On the net you can find many interesting ideas for decorating homemade feeders. If you approach this issue thoroughly, you can make a house of an unusual shape. After that, the paint left after the repair, various figures and colored paper are used for decoration. However, do not overdo it with rustling and shiny details, otherwise the birds will be scared. In addition, decorative elements should not create obstacles for food intake.

The use of paint will not only change the color of the structure, but also protect the material from the negative effects of atmospheric factors. Coloring can be monophonic or multi-colored. In this case, you can use various drawings. It is better if their theme is intertwined with winter motifs. On sale you can find many interesting stencils that will simplify the process of decorating.

An interesting design will turn out if you arrange a wooden structure in the form of a bee hive or a miniature mill. This work is very meticulous, but if you try, you can achieve a complete resemblance to real buildings. Decoration in the form of small branches will give the design a natural charm. At the entrance, you can hang a beautiful cone or an edible garland, the main thing is that it does not block access to the feed.

For decoration, old dishes can be used, for example, a saucer with a cup or a tea infuser. To do this, 4 holes are drilled in the saucer and a rope is pulled through them. After that, the cup is glued to the saucer. This design can be hung in any corner of the yard. The carving, bright painting, pieces of leather and applications look original in the design of the feeders. By creating several designs in the same style, you can get a beautiful composition that will emphasize the exterior of the yard.

Having spent a little time building a bird feeder with your own hands, you can not only provide the feathered inhabitants of the garden with a delicious snack, but also get a worthy decoration of the yard.

Winter time is a serious test for birds. Every day it becomes more and more difficult to find food. Take care of the birds - hang a feeder made with your own hands from the simplest materials at hand, which we usually throw in a landfill. We have selected photos and original ideas for making feeders that do not require special skills and complex drawings.

By accustoming the birds to the feeder, you can observe the entertaining turmoil of birds and the secret life of birds.

Some of them defend their rights in a fight with relatives, others enter into competition with other species, but without exception, all carefully look around so as not to miss the attack of a small hawk, which is very interested in the visitors of the feeder.

Materials for the manufacture of feeders can be very diverse, but there are some general design rules:

• the feeder should be, first of all, convenient for the birds, there should not be any difficulties when extracting food;
• the roof and sides will help protect the food from snow, rain and wind. From exposure to moisture, the food can deteriorate and become moldy, which means it will turn into poison for birds;
• it is desirable that the material from which the feeder will be made is resistant to moisture, otherwise this design will not last long and a new one will need to be made;

• walls and corners should not be sharp and prickly;
• feeders for small birds are made small so that larger and more aggressive species do not encroach on their food;
• it is better to place feeders on the branches of trees or attach them to the walls of outbuildings at a height of about one and a half meters so that cats do not offend the birds, and it is convenient to add food to feathered friends.

Advice. Birds get used to a permanent feeding place and are ready to travel many kilometers to the feeder. Therefore, feeding must be constant, otherwise the birds may die.

Plywood bird feeder

You can buy a feeder in a hypermarket, or you can make it yourself in a few hours. A plywood feeder can be made open, with a flat or gable roof, a bunker compartment can be provided if you cannot constantly monitor the amount of feed in the feeder. Of course, you will need drawings, fortunately, there are plenty of them on the Internet with ready-made sizes of parts for cutting. Choose the design that you like, the drawing will facilitate the work and ensure that the end result is exactly what is shown in the photo.

When choosing a drawing for a future feeder, consider the bird population in your region. Jays, pigeons and magpies can eat all the food, leaving little titmouses hungry. To prevent this from happening, make the size of the openings of the feeder so that large birds cannot reach the feed.

So, you will need a hammer, an electric jigsaw, nails of a suitable length, water-based glue, sandpaper, plywood, 20 x 20 mm timber. Consider the simplest feeder.

Wooden bird feeder ideas and drawings

Wooden feeders are attractive because they will last a long time, keep their shape well - this is due to the properties and reliability of wood. To make such a feeder, you will need at least minimal skills in working with tools and a drawing. The board for manufacturing should be 18 - 20 mm thick. Consider the option of making a feeder, which you can do yourself or take a photo as a basis for a drawing. We will need a 4.5 x 2 cm timber for the racks, a 25 x 25 cm square of plywood for the bottom, two pieces of 35 x 22 cm for the roof, nails, self-tapping screws and glue.

Such a feeder can be installed permanently on a dug-in pole or drill two holes in the ridge, screw in a screw with a hook and hang it on a wire. Several birds can fly up to the feeder at the same time, the food is protected from the wind by the sides and the roof, the feathered friends of the garden will like such a cozy dining room.

If there is a gazebo on your site, hang a simple feeder without a roof there. It is enough to make a side and a bottom. If you want to paint the feeder or open it with varnish, then use water-based compounds so as not to harm the birds.

Advice. To prevent the tree from splitting, the tip of the carnation must be made blunt, and a hole must be drilled under the self-tapping screw before screwing in.

Making a cardboard feeder (suitable for children)

One of the simplest feeders. The cardboard option is interesting in that it can be made in a place with children and at the same time have a great time with them. This would be a great craft for kindergarten or elementary school. There is a lot of room for creativity here. Cardboard is a great option, it is only afraid of straight water. But if you want to play it safe and make the feeder more resistant to moisture, then you can glue the outer elements of the feeder with wide adhesive tape, especially its upper and lower parts. In the forest or in the park, such a feeder can easily last all winter and part of spring.

The set of tools and materials is minimal, and if you don’t have something from this list, you can always find a replacement for it. So we need these materials and tools:

• A pair of cardboard sheets, (A4 format or more) ;
• Ruler;
• Adhesive tape (for structural reliability);
• Stationery knife;
• A tourniquet or a piece of nylon rope to hang the feeder;
• Pencil or felt-tip pen;
• Glue for cardboard or glue gun;
• Hole puncher.

If such a feeder is going to win a prize as the best craft in your kindergarten, then you will have to work a little in terms of external design. Here our cardboard will give odds to any Tetra-Pak (this is a milk or juice bag), you can draw beautifully on it and decorate it in every possible way. Undoubtedly, the prize from kindergarten will be yours!

pumpkin feeder

But here, as they say, words are superfluous - everything can be seen in the photo collage. I would like to add that such a feeder looks very attractive and unusual and will be a real decoration of your garden, this is due to the shape of the feeder and its color, which looks great against the background of white snow.

This option is also suitable for making with children. And such a beautiful, bright craft in kindergarten will definitely not go unnoticed.

Bird feeder out of the box Tetra pak) from juice or milk

You can make a feeder from a milk bag or a tetra pack from under the juice, like this. This is even for a child. For this you will need:

• a clean juice bag;
• a piece of nylon rope or wire to hang the feeder;
• adhesive plaster;
• marker;
• scissors or utility knife.

First of all, we mark and cut holes on opposite sides of the tetra pack. To make it convenient for the birds to take food and fly out. We glue the window on the underside with adhesive tape for the convenience and safety of the birds. We pierce a hole under the holes with scissors and insert the cardboard folded into a tube, which remains from cutting the holes above. In the bent corners we make small holes for the wire or rope. And tie to a branch.

The feeder can be attached to a tree trunk. Such a feeder will not sway in the wind. For this, feeding slots are made not on opposite sides of the package, but on adjacent ones. On the opposite side, we fix the wire in the slot and fasten it to the tree.

You can make a feeder out of two juice bags. We cut the first package along the narrow sidewalls, leaving the top not cut. We cut off the third part from the second tetra pack and cut a hole on the front side of the package - this will be the stern board or the bottom of the feeder. We combine the bottom with the first package so that we get a triangle. Parts can be connected with glue, wrapped with tape or pierced at the bottom of the sidewalls to insert tubes for cocktails.

Bird feeder from plastic bottles 1.5 - 2 liters

Consider some variations of the execution of the feeder with your own hands from plastic containers.

Option number 1. The simplest feeder

Symmetrically, on both sides of the bottle we cut out two holes: round, square, rectangular or in the form of an arch. Jumpers should remain between the holes. If you make a slot in the form of an inverted letter "P" and bend the plate up, you get a visor from the rain. You can stick a band-aid or fabric tape on the bottom edge of the hole - the edges will not be pointed and the birds will sit comfortably. We make symmetrical holes in the lower part and insert the stick - the result is a feeder with a perch.

You can attach such a dining room for birds on a tree by wrapping a jumper with tape, rope or other suitable material, as seen in the photo. If you make a hole in the cap of the bottle and insert the ends of the twine, and then tie them into a knot, you get a loop that can be thrown over the branches of garden trees.

Option number 2. Bunker feeder.

This design is rational in use in that the feed can be poured with a margin for several days. The feed, as it is eaten by the birds, will automatically fill up on the feeding ground itself.

You will need two bottles of the same volume. We mark one bottle with a marker before cutting. We make holes at the bottom, as in feeder No. 1, and remove the upper third of the bottle. We make two symmetrical holes at the top - a ribbon or twine will later be attached to them for hanging the feeder. In the second bottle, we cut several holes at the narrowest part - food will spill out of them. Do not immediately make large holes, it is better to expand them later. We fill the bottle with food, tighten the cork and insert the bottle into the first bottle cut off by a third.

Option number 3. Feeder with spoon

We make a hole in the cork and insert the twine for hanging. Then we symmetrically make two holes the size of a spoon. Above the bowl-shaped deep part of the spoon, we cut a hole in the bottle, slightly expanding it so that the birds can take food. We fill the feeder and hang it up.

Advice. With a red-hot needle or small nail, make several holes in the bottom of the feeder to remove moisture that has got inside.

Bird feeder from a plastic bottle 5 liters

Probably, in every house there is an empty plastic five-liter water bottle. It is very simple to make a feeder in one evening for feeding birds in the winter from this material. Such a container will hold much more food than a smaller plastic bottle, as can be seen in the photo. Several holes will allow you to comfortably feed several birds at once.

This is a very simple and quick option, invite your children or other family members to take part in the manufacturing process: find a ribbon or wire to tie the finished feeder to a tree branch, prepare a treat for the birds. Prepare a clean bottle, a sharp knife, secateurs or a clerical knife.

We cut the hole based on how we plan to fix the container on the tree:

• horizontally - cut a wide hole from the side of the bottom of the bottle and the same from the side of the neck;
• vertically - at a height of 5-7 cm from the bottom of the container, we cut several square holes or three rectangular ones.

It is convenient to tie a bottle by the neck to a branch with wire or twine. If the feeder is made in a horizontal version, then make two holes on the wall with a knife, through which pass the twine for tying. To prevent the feeder from swaying in the wind, put a quarter of a weight brick on the bottom, and load a treat on top.

From a five-liter bottle, you can also build a bunker feeder. To do this, you will need a five-liter bottle and two 1.5-liter bottles, a marker, a stationery knife and a rope.

With a little ingenuity, you can create unusual canteens for birds from the simplest plastic bottles that will decorate your site.

Shoe box bird feeder

Everything is simple here. We take a dense shoe box with a lid. We make a round hole in the lid. The hole needs to be shifted slightly from the center to the bottom edge of the box (a little different in the photo), this is necessary so that the birds can get to the food that will lie at the bottom of the box.

We make a small hole in the upper part of the box and insert a tourniquet or rope into it. Tie an old pencil or stick to the end of this rope. We will then tie the other end of the rope to the branch of the tree on which we plan to hang the feeder. Then you can wrap the box with wrapping paper, but this is for the aesthetic component, you can not do this.

We make a roof from ordinary cardboard and put it on glue. Next, we glue the lid to the box itself with tape, as in Figure 3, 4, and also thread the rope through the lid.

At the moment when we hang the finished feeder on a tree, the roof may peel off from the box, but this is not scary, it cannot go anywhere, because. rope will hold it.

And in the picture below is an even simpler version of the shoe box feeder. But there is no need to explain anything, everything can be seen in the photo. The whole box is simply rewound with tape, which, by the way, is very practical. And in our opinion it turned out - original and unusual.

Cardboard box bird feeder

To make a bird dining room with your own hands, the simplest material will do, which is stored in abundance on the balconies of most families: boxes for electrical goods, cardboard packaging for food. Choose thicker cardboard with a laminated coating, the laminate will slightly increase the life of the feeder. Although, as written above, wide tape can be used for these purposes. The advantage of this design is that there is already a bottom, walls and roof of the future feeder, which needs to be slightly modified by cutting square or rectangular holes on the sides.

You will need a nylon cord, scissors or a clerical knife and adhesive tape. Since cardboard is a very short-lived material and is afraid of moisture, the finished feeder wrapped with tape will last until the next season. Having cut through the side holes and fastening the cord, you can hang the feeder and fill it with treats for birds that will not take long to wait. Put sand or some pebbles on the bottom so that the structure does not shake much with the wind.

You can do it a little differently. We glue the lid of the box perpendicularly so that the lid serves as a stern stand, and the second part of the box is a side and a roof. We glue the structure with adhesive tape. We make two hooks from the wire: we bend a piece of wire in half and pierce the “ceiling” of the feeder with the ends, twist and bend from the inside. By connecting the hooks, you can hang the feeder on a branch. As you can see in the photo. Now pour the food and wait for the guests.

Bird feeder on the window (with suction cups)

Such feeders are a very interesting option for the overall development of children, and adults too :). The feeder is attached to the window, or rather to the glass, with the help of suction cups. Usually such feeders are also made transparent in order to fully enjoy watching the birds. If you have suction cups, you can make such a feeder yourself, for example, from the same plastic bottle, but you must admit that it will still not be as aesthetically pleasing as the finished version from the store. Children will probably start taking pictures of it all, and photos with yellowed, cloudy bottles will, to put it mildly, not so hot. Purchased options look very nice.

For birds, you need to have a few simple items and tools.

The feeder can be made with the children, but keep in mind that you need to follow every step, as in the construction process, sharp things are used - scissors, knives, screwdrivers and even, sometimes, a saw.

There are many options for feeders - from plywood, a plastic bottle, a can or cardboard.

Here are the most interesting, popular and original ideas for creating a feeder:

Feeder from improvised materials: toilet paper sleeves

You will need:

1 toilet paper roll

Peanut butter

small bowl

plate

A couple of branches

Strong thread or fishing line

Knife (blunt or plastic).

1. Connect two branches or sticks together with hot glue or string. You can skip this step if you make 4 holes in the sleeve (see below).

2. Make holes in the toilet paper roll so that you can put two branches or sticks into them. It is better to make 2 holes: a little higher and 2 a little lower (see image). This item is optional, because the sleeve can be put on in a different way.

3. Place the peanut butter in a small bowl and use a plastic knife to spread the oil onto the surface of the toilet paper roll.

4. Sprinkle food on top of the peanut buttered hub.

5. Repeat steps 3 and 4 for 4 more bushings.

6. Tie a strong thread to the connected branches so that the structure can be hung.

7. Hang all the cardboard sleeves on the branch structure, and then hang everything on the tree.

Plastic bottle feeder. Option 1.

You will need:

Any plastic bottle

Ribbon, thread or fishing line

Awl or drill (for making holes in the bottle and plastic cap)

Bolt and nut

Knife clerical or simple (if necessary)

Deep plastic bowl.

1. Prepare a plastic bottle. Remove the label from it, wash well and dry.

2. Make a hole in the middle of the lid and plastic plate.

3. Attach the lid to the plate with a bolt and nut.

4. Make a hole in the bottom of the bottle (at the bottom).

5. Make a few holes on the side (4-5) near the neck of the bottle so that the food can spill out when you turn the bottle upside down. Holes can be made with a clerical knife if the bottle is not too tight.

6. Take the ribbon, fold it in half, and tie the ends into a knot. Pass the tape through the hole at the bottom of the bottle.

Now you can pour food into the bottle, screw on the cap and turn it over. The ribbon will allow you to hang the feeder on a branch.

Bird feeder from a plastic bottle. Option 2.

You will need:

Plastic bottle

Plastic container

Strong thread or fishing line

Screwdriver or nail

Knife (simple or clerical).

1. Remove the cap from the bottle and the cap from the container.

2. Put the bottle cap on top of the container (in the center) and draw around with a pen, felt-tip pen or pencil.

3. Use a utility knife to cut a hole in the container lid. The hole can be made slightly smaller than the diameter of the bottle cap.

4. Poke one hole at the edges of the container lid.

5. Make a hole in the center of the bottle cap. The hole should be large enough for the bird feed to pour through.

6. Put the cap on the bottle and then insert the bottle into the opening of the container cap.

7. Tie a strong thread to the bottle and put the cap on the container.

Now you can fill the bottle with food or pour water and hang the feeder on the tree.

How to make a feeder out of a box (photo-instruction)

Original feeder made of polymer clay

You will need:

Polymer clay

Rope

Thick wire or piece of aluminum

Baking bowl or any other utensils that can be put in the oven

A small piece of cloth.

1. First roll out the clay on a flat surface so that its thickness is about 6 mm.

2. Gently place the rolled clay inside the baking bowl. Trim off excess pieces so that the clay lays flat. Make 3 large holes in the clay for the rope.

3. Put the bowl of clay in the oven. Carefully read the instructions for the clay to know how long it takes for the clay to harden in the oven.

4. When the clay hardens, carefully remove it from the bowl, tie three pieces of rope to it - tie a knot at one end of each rope, and insert the other end into the hole in the clay plate.

5. Tie all ends of the rope and secure with wire.

6. It is advisable to lay a small piece of cloth inside the plate so that the birds do not accidentally peck at the clay along with the food.

Original do-it-yourself pumpkin feeder

You will need:

small pumpkin

Wooden crossbars (even branches are possible)

Thin wire.

1. Cut off the top of the pumpkin.

2. Using a knife or screwdriver, make 4 holes in the pumpkin to insert branches or wooden beams into them. Make 2 opposite holes at the same height and two opposite holes a little lower - so you have one branch slightly higher than the other.

3. Take thin wire and wind it around each end of the branches so that the feeder can be hung on a tree. Connect all ends of the wire so that the feeder can hang evenly. Hook them up.

The original idea of ​​​​a bird feeder with your own hands

This feeder is suitable for sub-zero temperatures.

You will need:

Large plastic bottle

Small plastic bottle or small plastic container

Scissors

coniferous branches

Berries (optional)

Seeds

1. Cut off the bottom of a large and small plastic bottle. First you can make a hole with a knife and then cut with scissors. You will get the base of the feeder.

2. In the carved bottom of a large bottle, put spruce branches, berries and seeds in a circle.

3. Place the bottom of a small bottle or a small plastic container in the center of the base.

4. Pour earth, sand or pebbles into a small container.

5. Tie strong threads or fishing line to the feeder so that it can be hung.

6. If you put the feeder in the freezer overnight, and then remove and remove the plastic parts, you get an ice feeder.

How to make a do-it-yourself feeder using a bottle

You will need:

Small glass or plastic bottle (preferably with a lid)

Small saucer or plastic bottle bottom

Wire

Saw (if needed)

Screw half ring (hook).

1. Using screws, connect two small pieces of plywood. In this example, the dimensions of the plywood are 11 x 15 cm and 31 x 15 cm.

2. Using the bottle that you will later attach to the stand, mark the places where you will need to attach two pieces of wire - one at the neck, the other at the bottom of the bottle.

3. The neck of the bottle should be about 3-4 cm above the base.

4. Drill holes for the wire, put your wire through the bottom, wrap it around the bottle and fasten it to the back of the plywood (you can twist the wire or fix it with a stapler).

5. Fill the bottle with seeds, twist the lid so as not to spill the seeds, turn over and insert the bottle between the wires, and place a saucer under it and remove the lid.

6. Screw a half-ring screw to the top of the plywood to hang the feeder.

Original do-it-yourself bird feeder

You will need:

Tin can (preferably with a lid)

Sisal rope (sisal rope) or thick rope

A piece of thin plywood, a branch, or any small piece of metal

Hot glue.

1. If you have a jar with a lid, then the lid must be bent in half.

2. Take a small branch, piece of plywood, or other small piece that birds can land on and glue it to the jar.

3. Insert the bent lid as shown in the image (slightly inside the jar and over the metal part) and secure with adhesive.

4. Take a thick rope or rope about 80 cm long, and start winding the jar so that the long ends of this rope (30 cm) remain at the beginning and end. Use glue to secure the string to the jar.

5. Cut the rope, tie the ends into a knot and secure with glue.

You will need:

3/4 cup bird food

1/4 cup water

1 packet gelatin

Twine or strong thread

Biscuit baking molds

Baking paper.

1. Mix gelatin with water (1/4 cup) and bring to a boil, stirring. Make sure the gelatin is completely dissolved.

2. Remove from heat and let cool.

3. Add 3/4 cup bird food. More can be added if available.

4. Place the cookie cutters on baking paper and fill them with the prepared food mixture.

5. Cut a piece of thread and tie the ends into a knot. Partially insert the thread into the mixture.

6. Leave the mixture to dry overnight, occasionally trying to turn over when there is time.

7. Remove the molds and hang the food on the tree.

How to make a DIY bird feeder using tin cans

You will need:

3 cans of paint or cans

Piece of branch or wooden stick

Hot glue

Paints (if desired).

You can paint the jars, or you can leave it as is.

1. Glue a piece of branch to the jar so the birds can land and eat.

2. Wrap strong string or ribbon around the jar and tie the ends into a knot. You can secure the tape with glue so that it sticks to the jar better.

3. Fill the jars with food and you're done!

How to make a bird feeder from a plastic bottle

How to make a bird feeder

Bird feeders are a great topic for both bird lovers and inventors of small architectural forms. How to do simple or fancy feeder from cardboard boxes, from plastic bottles, from cans, from a wooden block or a bucket of mayonnaise, as well as from packaging for a cake and from everything else, what to feed titmouse and what sparrows eat look and read - ideas fly in the air and land on this page.

The cutest and most beautiful "cafe" for birds

Master Class
1. With a hot knife, cut the bottle in two places along the basting. See for yourself what width of the strip to cut, there are no exact dimensions.

2.See the picture below. Cut out a wider strip, get a more squat figure, cut out less - the product will be higher.

3. At the bottom of the bottle, cut a hole for the birds to land on, as shown in the photo. Do not forget to walk along the edge of the window with a hot knife so as to melt the cut and make it not sharp. The bird will sit on the edge of the window with its paws and should not be cut.

Paint the bottom of the bottle with acrylic paint.
4. When the paint is dry, make two holes with a hole punch (or a hot nail) in the bottom of the bottle, on either side of the entrance to the feeder at the same distance.

5. Symmetrical holes must also be made in the upper part of the bottle, twine will be threaded into these holes, with which the upper and lower parts of the bottle will be connected and this beauty will be hung.

6. Color the top of the bottle and don't forget the cork. Let dry.
7. The twine will be threaded according to the scheme:

8 Make a hole in the cork, take the knots and pull the two ends of the twine by the knots through the hole in the cork.

9Decorative detail. Make additional holes, as shown in the photo, on the bottom and top of the bottle and fasten the parts with decorative rivets. This will additionally fasten the details and give the look of a “brand item”.

Align the rivet holes on the bottom of the product with the same holes on the top.

And from such bottles, funny feeders would also turn out.

From cardboard boxes.

Any cardboard box with a hole cut out, hung up and filled with food, is a feeder. For example, a box from Rafaelo or boxes from New Year's children's gifts, which are accumulated in every house in abundance after the New Year.
We use milk bags, paint and decorate with buttons and twigs. Glue with silicone glue with a glue gun. (I bought myself a glue gun at a hardware store, it was 3 times cheaper there than in a needlework store).

By the way, if there is no balcony, but only a window, then the cardboard device will come in handy, it will not break the window when you lower it out the window onto the windowsill. My only fear is that in this house the neighbors are not happy to feed the pigeons so close to the cars. It would be necessary to make the hole in the box small, then the pigeons would not be able to feed on the windowsill, but the tits would scurry back and forth and delight the child and the kitten with their bustle. And so after all it's boring to look at the dove's ass sticking out of the box.

Bird "bistros" from cans

Baby formula cans are very bird-friendly.

Lauren Martin, a French horticulturist, has set up a whole feeder garden in her home.

From plastic bottles, it's easy.

The simplest homemade bird canteen that allows you to pour a full bottle of seeds, as a small hole prevents the seeds from getting enough sleep.

We do this according to the scheme:

From other improvised materials.

From the packaging for the cake.

wooden bar idea

From plastic buckets for mayonnaise.

wooden blocks

From whole coconut.

When the holiday is over and the flesh of the coconut is eaten, the capacity of the coconut feeder will be filled with simple food in the form of seeds and the exotic restaurant will turn into a budget eatery.

Two options for one technology:

How and where to place top dressing.

This is actually an important question. After all, we live among people and our interests or the interests of our feathered friends should not conflict with the interests of the people around us.
If the droppings of birds that we bring to our window or balcony regularly fall on the lower balconies or on the cars of our neighbors, expect trouble. And do we need it?
Solving this problem is simple. You need to know a few things.
1 Feed pigeons only on the ground, away from parking lots, balconies and window sills, so that pigeon droppings do not harm us and our neighbors.
2 Sparrows, unlike tits, do not fly away immediately as soon as they take food, they sit in the same place where there is food and poop in the same place and throw the husks from the seeds in the same place. Such a fellow sits on the edge of a bottle or a perch, takes the seeds, pecks and throws the husk back into the seeds or next to them. Spit, brat, all around. Tits are afraid of him and wait, sitting on the branches nearby, when he is full. Therefore, a container with seeds should be hung away from the wall of the house,

1. Here's at least how my neighbors did, look at the video.

This is a Yurok, they are wintering with us. These birds are like sparrows, they sit until they are full and try not to let the tits in, and the titmouse fly up, take a seed and peck out a seed from a branch.
2.Or place inside the balcony so you can clean up after your guests.

A child living in this house called this structure a "bread pipeline"

What do tits eat

For feeding tits, unroasted sunflower seeds, unsalted lard, fat, nuts (chopped, with soft pulp, such as walnuts) and an exotic option - a sawn coconut suspended on a string, are suitable.

What not to give birds
You can not give salted fat, fried seeds, smoked meats, rye bread.
Titmouses will not eat either buckwheat, or millet, or rice.
But sparrows will eat millet and crushed grains and raisins.

By the way, wild grapes () on your balcony will also attract birds. An alpine jackdaw flies to us, see the video at the end of the article.
Fat treat

Fat can simply be hung on a thread or cut into pieces and put in a vegetable net, I made such a design on my feeder, which is also an observation deck for my cats in the summer.