Do-it-yourself fishing gear. Fishing tricks and crafts: interesting ideas and recommendations

Experienced anglers are sure of success at any time of the year if do-it-yourself fishing gear was previously made, taking into account the characteristics of fishing, the type of reservoir and many other factors. There are many secrets of self-creation of fishing tackle with your own hands. But you can pay attention to the most popular methods that can be used even by beginners.

The secrets of creating tackle for carp

Carp is one of the common inhabitants of the water bodies of central Russia. On the territory of many regions there are fishing farms with carp ponds and lakes for paid fishing. But even in the case of a trip to their well-maintained shore, an experienced angler will definitely take with him equipment made by himself. These homemade fishing gear often become a more reliable guarantee of getting a big catch than the best examples of tackle from leading manufacturers.

When performing such “crafts”, the simplest items that are present in any private household are used. For example, each connoisseur takes with him a cunning and cautious carp self-created balalaika (putavushu). To make it you will need to take:

When assembling such fishing tackle with your own hands, the foam is used as a "beacon" showing the place where the tackle is thrown. A fishing line of the required length is attached to it with the help of electrical tape and nylon thread. A sinker is attached to its opposite end. On a sufficiently long leash, a hook is attached.

In the ideal case, fishing homemade products installed in several places are used. The length of the fishing line and the weight of the load is determined depending on the characteristics of the channel and the bottom of the reservoir, currents and other factors.

When going out to catch carp, various baits can be used. Experienced anglers call one of the most convenient among them soaked peas. The plastic retainer will allow you to control the bite.

Homemade fishing for carp

Another inhabitant of the underwater depths, popular with fans of quiet hunting with a fishing rod, is carp. Simple fishing crafts made from available materials will help to outwit and catch it. The easiest option to perform is a float tackle.

For manufacturing you will need to take:

The finished structure is assembled in a few minutes. All its components must be connected with maximum strength. The weight of a carp usually reaches 4 kg or more. This strong inhabitant of the underwater depths can easily get off the hook or break the tackle.

In reservoirs with a calm current, it can be installed bottom gear option. You can even use the “snack” known to everyone since childhood, which has become the prototype of the feeder that is popular today. To perform this option, you will need a strong rod, a fishing line, the length of which can reach 100 m, a float and several hooks at once. It is most convenient to use a bell as a bite signaling device. Such homemade products help the fisherman to become the owner of a significant catch and, without being constantly on the shore, control the gear.

Features of the manufacture of gear for winter fishing

Such types of gear are convenient just for fishing in the cold season. In most cases, homemade products for winter fishing provide the fisherman with the opportunity to move away from the place of quiet hunting and control bites due to the sound of a bell fixed on the surface of the water or a hole in the ice.

Many fishing homemade products become a great addition to professional devices. For example, it is popular to manufacture additional elements based on the familiar to everyone ballpoint pen. Such devices will help improve spinners and mormyshkas.

For manufacturing, empty rods of various colors are used. They are cut into rings and attached to underwater gear. Such decor will attract the attention of potential prey. In the winter season, it will additionally draw attention to itself, allowing underwater inhabitants to assume the opportunity to feast on small fry rare in winter.

In the cold season, many familiar items come to the aid of the angler:

Numerous homemade products for winter fishing are made by hand to ensure comfortable fishing from the shore or from the ice next to the hole. Such additions are interesting to make on your own.

In conclusion, it is only worth recalling how pleasant this option for spending leisure time in nature is to every fisherman. The preparatory stage for choosing homemade gear turns fishing into an even more interesting hobby. The implementation of tackle is available to every beginner.

During the period of long winter warming, when it becomes unsafe to go out on the ice, and the soul “screams” I want to go fishing, it’s time to remember about the spinning rod put away in the closet, choose the nearest small river on the map with a fairly fast current and start gathering on the nearest river.

"Carp anglers" are anglers who are looking forward to the open water season in order to once again measure their strength in a fight with a huge and very strong fish - carp. As soon as the ice cover leaves the reservoirs, the “carp anglers” begin to wait for the next weekend to go fishing.

For quality rest, you need to choose a good base. Your comfort, as well as the emotions you get from spending time at the base, will depend on the correct choice. There are many quality places in Kapchagay that allow tourists to have a quality rest.

Many anglers constantly pay attention to the latest in fishing to make it easier for them to catch fish and trophies. Most of these new products are no different from each other. But there are also real innovations that can completely change the process of catching fish.

The bream is the only representative of the genus of bream from the carp family. Basically, this fish keeps in groups, prefers deep places that are overgrown with grass. They mostly live in rivers and lakes. It attracts many anglers with its taste.

The outboard motor is one of the main components and systems in the design. The site presents a wide and varied selection of spare parts for the engine. Boat engines are used in boats, sailing yachts. They perform the function of an additional device when towing vehicles on the high seas.

Many anglers devote all their free time to their favorite pastime, looking for any ways to go fishing as quickly as possible. And if some cannot imagine life without store tackle and lures, then others constantly make fishing tackle with their own hands, claiming that they are no less effective than purchased products. The main thing is that they are made correctly.

DIY silicone lures

A wide variety of artificial lures are used for spinning tackle fishing. Silicone products are especially popular, which create a high-quality imitation of the behavior of live fish and attract predators well. However, such baits are subject to wear and tear, therefore, with prolonged use, contact with ferocious fish or other mechanical influences, they lose their appearance and cease to be suitable for further fishing. But does it make sense to throw them away after that? Of course not. After all, if you put together several silicones, you can create new, quite attractive nozzles from them.

So, the step-by-step guide to recycling old silicone products is as follows:

Making wobblers at home

Also, many fishermen know how to make homemade wobblers for pike with their own hands, saving themselves from the high costs of buying expensive store models. The process itself looks very funny and simple, because it does not require the use of special equipment or tools.

If you are going to make a wobbler, follow these instructions:

Homemade spinners for pike and perch

Another indispensable fishing accessory is a lure. There are two popular varieties of these baits - rotating and oscillating. The first type is made very simply, provided that you have minimal skills in working with tools and materials. . During the manufacturing process, it is necessary to apply:

• Ordinary paper clip.
• Tee.
• A metal plate, 0.5-1 mm thick.
• Tiny bead.
• Piece of sheet lead.
• File, needle files, scissors and pliers.

At the beginning of work, a petal shape is drawn on a piece of cardboard for the future bait, after which the drawing is transferred to metal. You need to take scissors and carefully cut a petal from a metal blank, after which it should be carefully processed with a file to prevent the appearance of burrs and other defects. Two holes are made along the edges of the petal (one from each edge), and they are also processed with a needle file. Places where there are holes can be bent 90 degrees in relation to the petal. Then it remains to take the wire and align it, and form a loop at one end and install a triple hook.

Then, on the same wire, you need to put on a petal and a bead, and then again form a loop for attaching the fishing line. Moreover, it is important to make a loop again, on which the fishing line will be attached in such a way that it does not interfere with the free turns of the petal.

In order for a homemade bait to work well enough, it must be set up correctly using the additional weight method. A lead weight should be installed between the tee and the petal, calculating everything with great care. At the last stage of making the spinner, it remains to give it the necessary color.

Not a secret that in order to cast the tackle at a long distance from one's own location, as well as to reliably dive the equipment to a depth, it is necessary to use a suitable sinker. And although in some cases, fishermen use any metal objects with the appropriate weight, if you approach the issue of making a sinker correctly, this will increase the chances of successful fishing in any conditions.

The following requirements are imposed on a quality load:

• It should be heavy, so it is preferable to choose lead as the basis, which has the highest density among all other materials available to the average fisherman.
• It should have a streamlined shape with a perfectly smooth surface, because when casting, the sinker lends itself to aerodynamic forces, and any roughness violates the flight range.
• It must have a secure fixation point with a fishing line.
• It should remain invisible so as not to cause increased caution in the fish.
• It must be accessible.

It is not difficult to make a sinker for fishing with your own hands.

Many seasoned anglers cast their lead sinker in an aluminum spoon. To do this, take:

First you need to install the selected utensils for melting on a burner or fire, and then place fine lead there. After waiting for the metal to melt, it should be placed in a spoon. After the material hardens, it can be separated from the aluminum surface of the spoon and used as a sinker.

Creating a live bait trap

Not a secret that the issue of storing live bait for pike spinning worries many fishermen. And if in spring or autumn, live bait fish remain viable for a long time and remain mobile, then in summer they can die in a couple of hours. But it may take too much time to catch new ones, and the angler does not always have the appropriate gear with him. However, if you make a simple and uncomplicated device from two plastic bottles, the problem will automatically disappear.

Step by step guide to making a trap:

1. So, first you need to take a two-liter bottle and cut off its neck. Then, on the same side, you need to cut off the neck in the wide part, which will allow you to get a detail that resembles a watering can. The bottom of this bottle is also cut off.
2. We take the second bottle and cut off the bottom from it, at a distance of 5-7 cm from the maximum thickness.
3. Further, the structure should be assembled by inserting the cut-off "watering can" back, but now in the opposite way, placing the thinnest section inside. As a result, the structure is interconnected with artificial threads.
4. A weight and rope should be attached to the trap.

To test the device in real conditions, you need to place the bait in it and lower it to the bottom of the reservoir where fishing takes place. Small fish will immediately become interested in attractive bait and try to eat it. Once she's trapped, there's no going back. Now, when you need to find a live bait, he will always be there.

How to make a do-it-yourself zherlitsa

For winter fishing of predatory fish, in particular pike, as well as large pike perch, it is customary to use a mormyshka and a popular tackle - a vent. And although it was invented a very long time ago, many experienced and novice anglers are constantly interested in making such a tool with their own hands. In fact, it is easy to make a zherlitsa, because its design remains simple and uncomplicated.

As a basis for future gear, a sewer PVC pipe 32 mm thick is used, which should be divided into 10-15 cm segments. Any irregularities and external defects can be smoothed out with a file.

Then three holes should be arranged in the pipe: two are made on one side, one against the other, which is necessary to fix the tripod, and one on the reverse side, where it will play the role of a fishing line stopper.

The stopper is formed in the form of the letter "P", while it should not interfere with the free running of the fishing line. Then you need to create a ring of fishing line with a diameter of 0.4-0.5 millimeters. Its purpose is to fasten the girders to a metal rod that will be driven into the ice. Also, up to 10 meters of fishing line is wound on a pipe section, to the end of which a load and a hook cling, preferably a tee.

Homemade bait for carp

In addition to gear and other important devices, many anglers also create effective baits for fish. It is no secret that for each underwater inhabitant it is necessary to select the appropriate bait composition. Otherwise, the desired trophy will simply ignore the proposed bait and go to the depths.

If we talk about catching crucian carp, then to increase the efficiency of the upcoming fishing, you can use a unique tool based on semolina, which should be prepared according to a special recipe.

So, first you need to pour water into the container and add a few drops of flavor there, and then put it on fire and bring to a boil. Semolina is placed in boiling water and constantly mixed until a homogeneous thick mass is formed. Then the fire is turned off, and the porridge is moved to the appropriate place for cooling and steaming. As soon as it reaches room temperature, you can begin to knead it with your hands, which will increase the density. Then the porridge is wrapped with several layers of gauze, but not with polyethylene. On the basis of such a mixture, balls are created that are put on a hook.

In addition to the above instructions for making fishing tackle, there are many others that amaze with their efficiency and ease of installation. So if you don't want to support someone else's business, and believe that homemade lures and tackle can be effective for any fishing conditions, keep looking for instructions and ways to create such products from improvised means.

Attention, only TODAY!

For a professional fisherman, making fishing tackle with your own hands is an activity that gives the same pleasure as fishing. By creating new gear, feeders, baits and other devices, a fisherman can increase the fish catch several times. For the manufacture of tackle at home, improvised tools and tools are excellent.

Making fishing tackle is a fun activity.

1. Wood. From wood, a fisherman may need planks and bars. Excellent wood is suitable for wobblers and poppers.
2. Metal plates. From this material you can make petals for spinners.
3. Wire. Can be used as anchors and lure rings.
4. A hammer.
5. Saw.
6. Sandpaper.
7. File.
8. Materials for covering tackle and other devices (lacquer, paint).

To make a fishing fixture with your own hands, it is enough to have improvised tools and materials.

Helicopter tackle is a popular winter tackle.

1. Rigid spinner.
2. Long leash.
3. Short leash with hooks.
4. Retaining ring.
5. Sliding sinker.
6. Main line.
7. Fixing cambric.
8. Motoviltsa, necessary for attaching all the gear.
9. Bite alarm.

Making tackle for fishing is very simple. A helicopter tackle is made from tin. Thin tin cans are perfect.

The diameter of the turntable reaches five centimeters and it is attached to a leash, the length of which is one and a half meters, and the diameter is 0.22-0.25 millimeters.

Four short leashes, 15 centimeters each, 0.15-0.2 mm wide, are mounted to the long leash. Fastening can be done with a swivel. Place hooks on leashes. Leashes are attached at the same distance from each other.

The leashes are attached to the main fishing line with a diameter of up to 0.45 mm with a locking ring. A flat load weighing up to 80 grams is mounted on the fishing line.

Slightly above the load, place a cambric up to four centimeters long and up to half a centimeter in diameter. Cambric fixes the line on the whip, which informs the fisherman about the bite.

Willow branches are placed under the whip, which can be collected on the river along the coast.
Before fishing on a helicopter, the fisherman must drill a hole in the direction of the current at an angle.

• a pre-bent turntable is passed into the hole. It is necessary to bend it so that it plays better in the water and has a resistance to fast flow;
• the bait is mounted on hooks, and the collected tackle is lowered completely into the water;
• after reaching the load of the bottom, you should stretch and fasten the cambric at the end of the whip, which should be located at the hole;
• excess line is wound on the reel. It should be next to the whip.

Having made a helicopter with his own hands, the fisherman will be able to fish all the time in winter and fish out large fish.

To make a wobbler yourself, you should take the wood of deciduous trees. The optimal length of oval wood is five centimeters.

1. From the wood, a bar of one and a half centimeters should be cut.
2. On the resulting bar, draw a wobbler fish.
3. Cut off excess wood along the contour with a knife.
4. In front of the future wobbler, make a mark with a pencil, and then cut out a cavity to create a blade. Cut the belly along the length of the bait. A fastener made of stainless wire will be inserted into this place.
5. From the wire in the form of rings, insert into the intended place and fill with epoxy glue.
6. Apply varnish to the finished wobbler. As the varnish dries, hang triple hooks on the workpiece.
7. Adjustment of the level of buoyancy must be carried out with the help of lead weights, which are attached to the openings of the abdomen between the nasal and abdominal loops.
8. Sand the bait and re-treat with a varnish with a waterproof effect.
9. Next, a blade is prepared from aluminum cans, which should be glued into the wobbler.

Following the instructions for making a wobbler, you can get an excellent copy, which will later be equipped with a fishing rod.

DIY mandula

How to assemble a mandala? You can make a mandala from polyurethane foam. Material is extracted from various rugs, women's slippers. Mandula is great for zander fishing.
For the mandala, you will need multi-colored polyurethane foam, double or triple hooks, a wire 0.5-0.7 mm wide, a cotton swab, red wool, pliers, round nose pliers, wire cutters, an awl, glue with high water resistance, a knife.

• cut polyurethane foam into cubes;
• stack the cubes on top of each other and coat the layers with glue;
• burn the center of the structure with a hot awl;
• the design should be made cone-shaped due to the knife. The awl must remain in the plates;
• a cotton swab is mounted in one of the cones;
• take round nose pliers and make a loop at the end of the wire. The other end clings to the hook;
• a cooked cone is placed on the hook;
• a fly is tied from the red wool of the glue. While the product dries, a polyurethane foam plate is put on the second hook so that it is more buoyant;
• all structures must be assembled together by twisting the wire.

It is possible to make a mandala from polyurethane foam. With such equipment, it is excellent to catch a predator.

Such baits are also called oscillators. To make a spinner, you will need a cruciform hammer, and at its end there are balls, a wooden board with a recess in the middle, a rubberized steel shaft, a metal ball, a drill, a hacksaw, a steel stylus.

1. Make a petal pattern on cardboard.
2. Make a contour on a one and a half millimeter sheet of metal with a stylus according to the template.
3. Clamp the sheet and cut out the petal according to the template with a hacksaw.
4. Fix the workpiece in the recess of the board.
5. Remove uneven areas around the edges and make holes for the rings.

Hand oscillators are made of metal and wood. A simple design will allow you to catch excellent fish.

Spinner making

The frame of the spinner is made of stainless steel wire. Its length should be at least one hundred millimeters, and its diameter should be 0.8 millimeters.

1. The curvature of the wire is removed with pliers, slings or chalks.
2. The petal is made from aluminum cans with a volume of 0.33 liters. Due to the softness of aluminum, it can be cut with scissors.
3. Make holes on the wire with a thick needle to secure the petals.
4. Assembly. One end of the wire is twisted with pliers in the form of a ring. After that, a bead and a petal are put on. The design is fixed with another bead.

You can increase the weight of the spinner by choosing a long wire, as well as using a sinker with a hole.

It is better to make a spinner out of wire. It is subsequently weighted down due to the sinker.

To make a castmaster, you will need a metal empty pipe with a cross section of sixteen millimeters and lead.

From the tools you will need a hacksaw, a drill, a drill up to three millimeters, a file, a vise, a caliper, a soldering iron.

• the pipe is clamped in a tesk and the workpiece is sawn off. The cut angle must correspond to the original angle of the castmaster and sounding;
• make holes in the centers of both ends of the workpiece;
• tin the workpiece from the inside so that the lead does not fall out;
• seal the holes with masking tape, let it dry;
• close the remaining holes with molten tin. To carry out this step, you will need a soldering iron;
• carry out the processing with sandpaper and drill lead through the holes in the pipe.

Make a castmaster from a small hollow tube. Lead should be handled with care, as it emits fumes that are harmful to health.

DIY balancer

Such a balancer may be needed during winter fishing. It looks like a voluminous bait that looks like a fish.

1. It is made from light metal alloys.
2. Hooks are attached to the head or tail of the workpiece, the sharp end should look up.
3. Two loops are attached to the back and abdomen of the bait. The first is needed for fishing line, and the second for a threesome.

Balancer - equipment that looks like a fish and is used in winter. Homemade balancers guarantee a good catch.

Foam rubber is prepared in the form of fish from foam rubber sponges of different colors.

• before starting work, moisten and wring out the sponge;
• then a fish 3-8 centimeters in size is cut out;
• can be put on a jig without glue;
• if you want to fix a triple hook in the bait, you need to make an incision, and then insert the hook and fix it with water-repellent glue.

To make do-it-yourself rigs, you may also need a sponge for washing dishes. Foam rubber fish are made from it, which are able to attract a large flock of fish.

Mormyshkas at home

Mormyshkas will need lead or lead-tin alloys and gypsum. Mormyshka should be prepared outdoors or in a mask, as lead is toxic.

1. Create a plaster mold. Pour gypsum into a matchbox, and put a mormyshka in the middle.
2. After the plaster has dried, the mormyshka is removed. The mold is cleaned and channels are created for pouring the tin.

Mormyshka is the simplest bait that is very easy to make yourself. It is necessary to prepare a plaster and a mold.

Do-it-yourself bite signaling devices

To create an electronic format signaling device, you will need a bicycle spoke, electronic and bite signaling devices with a rod mount.

1. Attach the needle to the signaling roller.
2. On the other hand, a barrel is fixed.
3. The resulting signaling device is mounted on the rod stand.

Biting annunciators can also be made by hand. The basis is a spoke from a bicycle and a purchased signaling device.

To carry out fishing on a float rod, artificial baits are required that imitate crustaceans, worms, and maggots.

• anise;
• vanilla;
• garlic.

As bait, you can use wet and dry flies made of wool, feathers, cork, foam, colored threads.

To prepare fishing tackle at home, it is enough to use improvised means: wooden bars, polystyrene foam, wool, feathers, threads, and so on. Before making homemade products, you should understand what it will be like in the future and what kind of fish you can catch on it. Properly made tackle will help the angler to catch a great catch.

Experienced fishermen construct homemade products for winter fishing, which are often much cheaper and more effective than store goods. Fishing stores have a wide selection of different products, but many tackle has flaws that are difficult to fix. For this reason, fishermen are engaged in the manufacture of winter fishing rods at home.

1. The most common method is to cut out a tablespoon handle. To improve catchability, it is recommended to slightly bend the handle. Use a drill to make holes for the hooks. If you cut off a small piece of metal from the handle, then after processing it will look like bleak, which pikes love.
2. From teaspoons, you can make an almost complete copy of the Devon spinner. This allows you to set the bait more firmly so that it does not get lost while fishing.
3. An unusual bimetallic spinner can be made from several metals, such as copper and steel. First you need to take 2 similar pieces of metal, in which holes for rivets have already been made. Details must be carefully riveted and processed. By stamping the future spinner, it is necessary to give the desired shape.

A rotating view is made of 2 parts - a petal and a base. When the angler plays with the tackle, the petal rotates near the base, luring the fish. Manufacturing process:

1. The petal pinwheel is made from round or oval pieces of metal. The ends of the parts must be carefully processed, given an elongated shape and twisted a little. The hook is fixed from below, it is necessary to install a sinker above it so that the spinner rotates freely.
2. Turntables with turbines come in different shapes and types. They are made with 2, 6 and 8 blades that spin around the base. Petals can be made from any soft material.

Balance lures are a bit like live fish. The balancer is made from a pipe 6-7 cm, to the ends of which hooks are attached. To make the revolver sensitive and balanced, you need to cast a special mold from plaster, install hooks in it and pour the mold with molten iron. After the material hardens, you need to treat the surface and paint the bait.

Advantages of homemade floats

Knowing the habits of the fish, the characteristics of the reservoir and the season, you can make a suitable float for winter fishing, homemade will surpass any expensive float that can be found in specialty stores. In addition, floats made by yourself are not a pity to lose, since they are most often made from cheap parts.

Homemade gear

There are several types of homemade winter fishing rods with a reel, but the most common are:

1. filly.
2. Rocker.

The filly rod is popular among fishermen because:

1. It consists of a small number of parts, it is a simple and strong rod for ice fishing.
2. It is easy to transport and prepare for fishing.
3. It is convenient to install such a fishing rod on the edge of the hole, and even if the prey can drag it under water, it will not be possible to take it to the bottom due to the high buoyancy of the foam.
4. When hooking, it is convenient to hold the tackle even with warm gloves.

The only drawback is the inconvenience of winding the rod, as it does not have a reel.

It is easy to make such tackle yourself:

1. For the handle of the fishing rod, high-quality foam is used.
2. On the handle you need to make a longitudinal hole into which the whip will be inserted. This is easy to do with a hot nail.
3. After stripping the workpiece, you need to start making the legs of the fishing rod. Sewing spools cut in half without thread are suitable for this purpose.

Rocker. Winter fishing mainly brings small peaceful fish to fishermen. Only with the help of a rocker can you catch large prey.

Anglers use a wire type of tackle to catch bream. For the production of the structure, you need:

1. A piece of wire about 20 cm long.
2. Several templates.

Manufacturing process:

1. On a wooden board with a marker, you need to draw a drawing of the future equipment. In places of bending, nails 3 mm thick should be hammered.
2. Using the layout, you need to make a design, providing loops at the edges and in the center of the snap. Having removed the finished product, it remains only to remove the excess material and shape it with your hands.
3. To equip a finished homemade product for winter fishing with your own hooks, you need to stretch the fishing line through 3 loops. Pieces of fishing line should remain on the extreme loops, tie hook No. 5 to each.