Gel polish application technology

Almost all masters today provide gel nail polish services. In this article, we will consider gel polish technology, the use of which will help the master to complete the design in the highest quality way.

Without any doubt, gel polishes are one of the best achievements of the nail industry in recent years. The hybrid of gel and varnish is very popular among both masters and clients. Gel nail polish is currently one of the most fashionable and sought-after nail services. Main advantages gel polish technology: convenience and simplicity of the process of applying to the nail; high polymerization rate in the lamp; color stability; intense shine of the coating is maintained until the removal procedure; safety of use for the nail plate, hypoallergenic materials.

Subject to correct gel polish technology stays on nails for up to 20 days. At the same time, the coating does not lose its luster, does not crack or chip off, and does not require additional correction. Nails look absolutely natural and at the same time the natural plate is protected. However, sometimes even these latest high-tech achievements let us down. Instead of the declared 2-3 weeks of wear, the coating begins to crack or peel off in the very first days after application. Consider errors in technology applying gel polishes.

Preparation of the nail plate for gel polish

1 step. Formation of the free edge of the nail. The free edge of the nail plate must be perfectly even and completely free of dust.

In case of delamination of the nail plate, carefully trim it with a file for natural nails (240/240, 180/180). If necessary, at the request of the client, you can do a manicure. But, if you used oils or creams during the procedure, you must thoroughly clean the nails after the procedure with cleansing liquids and dry for at least 10 minutes. To avoid peeling of the gel polish coating, you need to move the eponychium and remove the cuticle from the nail plate.

2 step. Removal of the upper keratin layer of the nail plate.

We use a buff with high abrasiveness. We remove only gloss from the nail plate. If this is not done, the gel polish will chip off. We do not touch the treated nails with our fingers. For the final removal of residual moisture and filing, we use a special agent with a low-fat Bond pH formula (dehydrator). This allows you to ensure a strong adhesion of the gel polish to the nail plate.

3 step. Applying base gel.

In the event that the nail plate is very soft and weak after removing the extended nails, the gel polish may begin to chip off in the first days after the application procedure. To prevent this from happening, a primer can be applied to the weakened plate. This is necessary for tight adhesion of the base gel to the natural nail. Modern acid-free primers do not contain methacrylic acid - application is safe for natural nails. They are a primer. In order not to get, it is necessary to treat the end of the nail with a primer.

Technology for applying base gel, gel polish and finish

The application of the base gel is one of the main components. The base gel serves as the basis for the gel polish. It is responsible for creating a molecular bond between the natural keratin of the natural nail and the artificial gel material. At the same time, the base gel protects the nail from the penetration of coloring gel polish pigments.

AT gel polish technology it is important to ensure that the materials are applied to the nail plate in a very thin layer. This also applies to the base gel. We collect a small amount of base gel on the brush and apply it with rubbing movements, starting from the free edge. We also cover the end of the nail. After that, we pass along the entire nail plate with long movements from top to bottom. We make sure that the gel does not get on the skin, and side rollers. Next, place the nail in a UV lamp for 1 minute to polymerize the base gel (in an LED lamp for 10 seconds). After the base has dried, use a dry brush to level the dispersion layer. This is done so that the colored gel polish evenly lays down, does not gather and does not spread to the side rollers.

When using colored gel polishes, you need to know some of the nuances.

1. All layers must be applied very thinly. If you do not comply gel polish technology, then we may have the following problems: waves and notches on the free edge; air bubbles over the entire surface of the nail.
2. Using bright, pastel colors, apply 2 coats of gel polish. At the same time, each of the layers must be polymerized in a UV lamp for 2 minutes (in an LED lamp for 30 seconds).
3. When working with dark colors, the first layer may be unevenly painted over. There is nothing wrong with this. No need to apply a large amount of gel polish. This problem will be corrected by the second layer. When working with dark tones, it is better to do 3 thin but even layers than 2 dense ones that will go in waves.
4. Do not forget to cover the end of the nail, pay attention to the uniformity and smoothness of the coating.

The final stage is the coating with a finishing gel - Top Coat. The finish gel is applied in a slightly thicker layer than the color one. Again, do not forget about the ends of the nail. Finishing gel should be well dried. Insufficient polymerization of the gel will lead to the fact that when the sticky layer is removed, the gloss will be lost. Dry it in a UV lamp for 2 minutes, in an LED lamp for 30 seconds. We remove the dispersion layer with a special Cleanser - this gives the coating a beautiful glossy sheen. Cleanser contains moisturizing ingredients that protect the nail plate and skin from drying out.

Gel polish is removed in 15 - 25 minutes. Gel polish is removed by soaking in a special tool in the same way as acrylic nails. The longer the gel polish was on the nails, the longer it will take to soak. The presence of a primer further enhances the process gel polish removal. After soaking, the gel polish rises in the form of a film and can be easily removed from the nail plate with an orange stick.

Compliance gel polish technology avoids most problems, it is equally important to use high-quality certified materials.

Technology for applying gel polish on video

This video shows the application and removal of gel polish using Gelish as an example. Gel polishes of other brands are applied in a similar way.

Another video for gel polish technology(used by Gellini)

A beautiful smile today speaks not only about health, but also about the success of its owner. Everyone wants to smile openly without being embarrassed by their teeth. If you decide to visit a dentist, all St. Petersburg dental clinics are at your service on the medical portal medsovet.info. Here you will find detailed information about services and prices, addresses and telephone numbers of public and private dental hospitals and clinics.