Why do we need plastic bottles on the wheels of trucks in winter? That's why some truckers do not go to the track without empty bottles in their wheels. Reasons for installing plastic containers on wheels.

I read on the Internet about the riddle, why they say truckers in Novosibirsk insert an empty plastic bottle into the hole of the wheel disk. The answer was immediately written there, but I had some doubts about its correctness.

Who knows the answer to this situation, check if everything is really so ...

As they say, this question was voiced in the game "What? Where? When?" and experts have not given him the correct answer. Its author was Vasily Chemenov from Novosibirsk, who as a result received the coveted reward.

So why do we need bottles?

So, as many have noticed, it's all about low temperatures Oh. But why a bottle? Maybe there is a nipple from the tire? Yes, it seems that nothing should happen to him in any frost ...

The correct answer looks like this: under the influence of extremely low temperatures, it is possible that the brake pad may freeze or jam. As a result, moving to high speed, the driver will not be able to find out about the malfunction in time and after a while the jammed wheel will turn into a tire explosion.

And supposedly for this, empty bottles are installed, looking at which, the driver can control the rotation of the wheels in the rear-view mirrors. Is everyone moving as they should?

What confuses me.

1. Are these bottles really visible in the rear-view mirrors? All the same, the photo shows that they do not stick out too much for the dimensions, although I haven’t ridden in trucks and I don’t know the review of mirrors there.

2. Is it really possible to determine on the go if there are up to four bottles on each side, is each spinning?

The issue of bottles in trailer wheels appeared on the Internet for a reason. He was voiced by Novosibirsk Vasily Chemenov to experts on the air popular game"What? Where? When?" As a result, even bright minds did not find the right answer. The man received the coveted reward, and viewers were surprised to find out why they still use empty bottles.

There was a clarification in the question that this principle is used by Siberian drivers when traveling. This nuance prompted connoisseurs to think that such a simple technology could save one of the holes from freezing. Although the answer was not recognized as correct, the key word - cold - was nevertheless uttered.

The author of the question explained that under the influence of extremely low temperatures, breakdowns and freezing are not ruled out. For example, the pad may freeze or jam. As a result, driving at high speed, the driver will not be able to fix the malfunction, but after a while the jammed wheel will turn into a tire explosion.

Now it became clear for what purpose empty bottles are installed. Looking at them, the driver can constantly check in the rear-view mirrors whether all the wheels are moving properly. The need for invention is cunning, as you know, and folk know-how can sometimes surpass any industrial inventions.

Why do truckers put empty bottles into the wheels of a truck trailer.

A trucker is a difficult profession that dictates its own rules of conduct and does not forgive oversights. Many people think that truck drivers have a lot of empty superstitions, but in fact they know exactly what they are doing and why. For example, it seems pointless to ordinary people to insert empty eggplants into the wheels of a trailer. But this action also has a logical explanation ...

The issue of bottles in trailer wheels appeared on the Internet for a reason. He was voiced by Novosibirsk Vasily Chemenov to connoisseurs on the air of the popular game “What? Where? When?" As a result, even bright minds did not find the right answer. The man received the coveted reward, and viewers were surprised to find out why they still use empty bottles.

A special technology that is used by truckers in cold regions.

Empty bottles in wheels.

Looking at the bottle, you can see if the wheel is spinning.

Let's figure out why on the track you can see trucks with bottles in their wheels, with a gas mask on the gas tank and a "suspended" wheel.

Why put bottles in wheels

When driving on highways, motorists replace that in some trucks they are stuck in the wheels plastic bottles. It is clear that this is not done for the sake of jokes and aesthetics - then why?

There are several reasons, all important. The general thing is that such an “improvement” of the wheels is not used on the tractor itself, but on the trailer.

If time does not notice that the trailer begins to seize the wheels they will start to fade. And in this case, bottles help: in the rear-view mirror, the moment when the wheels start to scroll (slip) is noticeable on it. Normally, the bottom of the bottle should go beyond the boundaries of the tire. To make the situation visible from a distance, use colored plastic containers.

Another reason they put bottles in wheels is this protects the bolts and nuts from freezing. In cold climates, these parts freeze, and if a wheel or bolt needs to be replaced, this is an obstacle. Here are plastic bottle caps hiding wheel bolts.

And this trick protects the bolts from corrosion. And prevents wheel theft: a trucker who fell asleep when the attackers try to unscrew the nuts and remove the wheels will react to the noise from the bottles.

Also bottle caps can replace lost wheel stud caps. The European Convention on Safety while Driving says that caps must be worn on large vehicles. Studs in open form they can catch a pedestrian by clothes and even drag him behind a car. In this case, bottle caps are saved.

Finally, plastic containers help check the working condition of the brakes, it determines the spinning of the wheel.

To find out about problems with the technical operation of the rear axle or front axle, the bottles are put on the wheel studs with the front part. If the wheel slows down, the container crumples and makes noise - this informs the driver about the breakdown.

Thus, drivers insert bottles into wheels in order to:

in time to determine the jamming and towing of wheels, malfunctions of the brake system of the trailer;
protect wheel bolts and nuts from corrosion and freezing;
replace caps from wheel studs with bottle caps;
use bottles as an alarm, prevent wheel theft.

Why hang a gas mask on a gas tank

Another improvement that can be seen on trucks is the gas mask on the gas tank.

The reason for this "tuning" - protection of the gas tank cap from dirt and corrosion. This is especially true for construction and municipal equipment.

Gasoline and diesel contribute to the fact that the tank cap on those trucks that work in "dirty" conditions decompose over time. Gas mask rubber in this case is an affordable and easy option to protect the element.

In addition, in the 80s it was a fashionable habit among truckers to hang a gas mask on the gas tank. And today there are drivers who use such "tuning" as a joke.

Why one wheel in the air

Another picture that can be observed on the track is that one wheel of heavy trucks hangs in the air without touching the ground. People think it's a spare.

But no, this so-called "lazy" bridge, additional lifting axle. As the name implies, it is not always used, but only when necessary.

Let's imagine: the driver goes after unloading the truck, empty. In this case, the "sloth" is lifted up in the air - there is no need for it. Tires are healthier and fuel consumption is lower.

Now another story: the truck is loaded to capacity. By lowering the "lazy" bridge, you can remove part of the load from the main axle and suspension. And the weight of the cargo itself is distributed more evenly - which makes it easier to pass the weight control, including.

Thus, a rolling non-driving bridge ("sloth") allows you to carry more weight than usual, because the load is distributed over three axles instead of two.

Another point of using the "lazy" axis is related with road train stability.

If the "sloth" is located behind, when it is lifted onto the drive axle, the pressure will increase - and this will improve the stability of the car on a slippery road.
If the "sloth" is located in the middle, on the contrary, it worsens controllability: when it is raised, the front axle is loaded, it is more difficult for the car to move off.

Therefore, vehicles with a 6x4 or 6x2 wheel arrangement with a rear “sloth” are more stable on ice and snow, and are easier to get out of a slippery parking lot than a standard 4x2 tractor.

By the way

Why "trucker"

There is no single version of why truck drivers began to be called truckers.

The most plausible version is that in Russia, due to difficult conditions (bad roads, long distances, harsh climate and risks), the process of delivering goods is called "taking / punching the track." From this jargon comes the designation "truck driver" - drivers literally take the distance with a fight.

Thus, the term reflects the essence of a complex profession.

quality boo Spare parts for Scania trucks can be found in our catalog

Going on a trip out of town or to the country, motorists meet truckers along the highway, who have plastic bottles on their trucks. This strange phenomenon causes a lot of controversy and questions as to why bottles are inserted into the wheels of tractors and trucks. Therefore, we decided to find answers to questions and picked up relevant solutions.

Plastic bottles on truck wheels

AT winter period truckers and heavy truck drivers use plastic containers to prevent the wheel from jamming. This method is mainly used for trailers, since a powerful tractor can move without effort.

On trailers, the driver does not notice that a stuck wheel begins to wear and burst when the truck moves. They cannot see this process as the trailer is long.

To solve the problem, truckers install plastic containers and can easily see the moment of slipping or scrolling in the rear-view mirror. The container is mounted in such a way that its bottom slightly extends beyond the border of the tire.

They also try to use colored plastic so that it can be seen from a distance.

Another reason for use is to protect bolts or nuts from freezing. In very cold weather conditions wheel bolts on the wheel freeze. If the tire starts to crack or burst, the trucker simply cannot replace it.

To protect yourself from this, bottle caps are used, and bolts are closed with them. We also note that bottles are mainly installed on tubeless tires, since when jammed, they wear out faster than tube ones.

Reasons for installing plastic containers on wheels

Protection of fixing bolts against corrosion.

Protection of wheels from theft. There are situations when drivers simply fall asleep. At this point, the robber unscrews the nuts and removes the wheel.

This creates more than a serious problem, since if we are talking about a truck, it can cost from 3,000 to 5,000 rubles, depending on the manufacturer and quality.

Therefore, truckers have invented a new way of protection by installing bottles on wheels. They are used as an alarm.

They are also used to replace lost caps from wheel stud nuts for the purpose of safety at the time of movement. According to the European safety convention, when heavy trucks are moving, caps must be installed on each hairpin.

Therefore, if they are lost, bottle caps are used so that when driving, they do not catch people with studs in the event of a collision, since the studs can catch on clothes and drag the pedestrian along.

As an alternative, truckers can use plastic bottles when the brakes on the truck are malfunctioning. In this way, drivers determine whether the wheels are spinning or not.

Basically, a plastic container is put on the front of the wheel studs in order to determine the problems associated with the axle of the rear or front axle.

If the wheel begins to spin with braking, the bottle is crumpled and makes characteristic sounds when crushed, due to which truckers determine the malfunction.

Plastic bottles on wheels for car theft protection

Motorists believe that for theft vehicle robbers use certain technologies and keys as a gadget. However, this is not entirely true, since the most cunning manage to steal a car in front of the owner.

A criminal uses a plastic bottle to steal a vehicle. He installs it under the body, rear or front wheel, depending on the drive axle, and hides until the owner appears.

When the engine is started and movement begins, a strange sound is heard from under the car - it is caused by a crushed plastic container.

However, this cannot be understood in the cabin, and while the owner runs out of the car to determine the source of the noise, the robber gets behind the wheel and steals the car.

To protect yourself from unnecessary problems, we recommend when leaving the car:

close the door,
set the car to alarm.

In this case, the robber will not be able to deceive the driver and take possession of his vehicle.