A light battle ax with a long handle. Battle ax: origin and historical features

Find an ancient ax, and the day will not be spent in vain. There are finds that can make the whole season. But what do you know about ancient axes? Few diggers will be able to distinguish a battle ax from a work ax. And even fewer of those who can distinguish the ax of a simple warrior from the ax of the leader. Today, even among official archaeologists, you can hear game, like - the main warrior had the biggest axe. Drive such specialists with wet rags. In fact, defining an ax is quite simple.

All ancient Russian axes can be divided into two large groups - axes with drawn butt("hammer") and axes with a regular butt. The technical characteristics of both groups of axes are different from each other.

In the first group There are three types of axes, most researchers refer to battle axes. The first type, “A”, is characterized by a wide rectangular blade and a flat guy on the butt (forms 1-4).

According to some differences in the shape of the blades, axes of this type can be divided into two subtypes: the first is represented by axes with a trapezoidal blade, the second - by axes with blades approaching a rectangular shape (shapes 1-2).

Type "A" dates back to the 10th century. according to finds in mounds of this time and by analogy. The second type of axes in this group, type "B", has elongated hammers on the butt, usually ending in small hats, and narrow, symmetrically expanding into often rounded blades. Cheeks are usually oval (forms 5-11).

Axes with elongated butts as a whole can be dated to the X-XI centuries.17. Analogues of IM are known in Hungary and Poland.

The third type, “B”, is represented by axes with a small hammer on the butt, and sometimes simply with a slightly thickened upper part of the butt. The blade is almost always wide, sometimes even drawn down in a narrow strip (forms 12-18). Interestingly, some battle axes (XIII-XIV centuries) from Vladimir and Novgorod with rich decorative details belong to the same type.

These axes, which can be called "chasings", date back to the 10th-12th centuries, but the bulk of the finds date back to the 11th century. Probably, the initial form for axes of this type was type "B", complicated by a number of characteristic details inherent in axes of the second group (without hammers on the butt). Analogies are known in Poland, Hungary, Czechoslovakia. Axes of the three named types were made using the same technology from two strips of metal.

Axes of the second group represented by a much larger number of types. Some on the butt have subtriangular protrusions-processes (bottom and top). It is possible that these processes originated from the "hammers" on the butts of axes of types "A" and "B" and are intended mainly to protect the ax handle from the impact of enemy weapons. The decorative caps that already appeared on type “B” axes (forms 1, 5, 7, 10, 11) show that the hammers here have lost their original purpose and serve to protect the ax from an enemy strike.

The processes mentioned above are found precisely in axes of those types, the origin of which dates back to the 10th century, to its second half. Such are the axes of the "G" type (forms 19-20).

Very small in size, with a blade that widens evenly from the butt and resembles a B-type ax blade with jaws on both sides. Axes of this type date back to the second half of the 10th-11th centuries; analogies are known to them in Poland. 23 copies of such axes are known.

The most common type of battle ax in Russian antiquities of the late X-XII centuries. is type "D". These are axes with a wide blade and butt protrusions. Axes of the “D” type continue the evolution of the blade shape, which was already outlined in the second half of the 10th century. (axe shape 11) for some axes of types "B" and "C".

According to the nature of the lower notch, type “D” axes are divided into two subtypes: in the first, the lower notch, to a greater extent than in the second, approaches half the circle. According to the size of the pen, four options can be distinguished in each subtype ("a", "b", "c", "d"). There are 102 examples of this type in total.

Type "D" dates back to the end of the X-XII centuries; the vast majority of axes were found in burials of the 11th century. In Poland, such axes also date back to the 11th century. (forms 19-32).

Axes of types "E", "Zh", "3", "I" are much rarer and do not give, like type "D", clear and numerous series. Type E axes are characterized by a strongly concave top line and a large bottom notch. The date of this type of axes is the 11th century. (forms 33-34).

Type "Zh" is represented by axes with a strongly drawn down blade, completely similar to the blades of some axes of types "B" and "D" (form 35).

Only five copies of such axes are known, which date back to the 11th-12th centuries. and have exact analogies in Poland 29 and Scandinavia.

All axes of type "3" differ from each other, but they are united by small jaws (always located only on one side), small dimensions, a slight bend in the top line and a specific small notch at the bottom. They date back to the 11th-12th centuries. (forms 36-37). Nine axes of this type are known.

A characteristic feature of the “I” type axes is the presence of several elongated jaws on both sides. The blade of these axes is usually not wide, the upper line is slightly concave, the lower notch is large. Date - X-XI centuries. Five axes of this type are known (form 38).

K-type axes with a straight upper line and an inverted trapezoid butt hole are found exclusively in the Ladoga barrows (forms 40 and 41).

The upper line of some axes of this type is perpendicular to the butt vertical, while others depart from it at a slight angle. The cheekbones are usually located on one side. Date - X-XI centuries. E1 specimen is known.

Axes of type "L" differ from axes of type "K" primarily in the oval shape of the butt hole. They are found not only in the Ladoga region, but also in the north-west of the Novgorod land. Dated to the 11th-12th centuries. 14 copies are known (form 42).

Axes of the “M” type are wide-bladed, without a lower notch, with a relatively symmetrically expanding blade, very thin and always rounded, with cheeks on both sides of the butt, with a subtriangular shape of the butt hole (form 43).

Historian and specialist ancient weapons Spitsyn considered these axes to be battle axes. Their date is X-XII centuries34. Analogies to such axes are known in Poland and Scandinavia. They are distributed mainly in Northern Russia 37. There are variants of this form - some have a less wide and more symmetrical blade, the cheeks are not triangular, but somewhat elongated (form 39); others have a lower notch (form 44). These are later variants of the M-type axes, already known in the 11th-12th centuries.

The described types of axes are generally fighting. In addition to the shape, battle axes differ from working axes in the size of the butt holes. For the task of separating battle axes from workers, these dimensions are of paramount importance, since they make it possible to judge not only the thickness of the ax handle, but also its length. The shorter handles of working axes were also thicker, while the battle axes of the Middle Ages had thin and long handles. A characteristic feature of axes of the selected types is the small thickness of the ax handles, which was compensated by a considerable length, reaching up to 1 meter. The fact is that a long ax handle increases the force of impact, but with it the force of recoil. For a battle ax, the impact force is important; for a working ax, the recoil force is no less important; therefore, the handles of working axes should not exceed in length the size at which the recoil force becomes more noticeable. Thus, a decrease in the recoil force is achieved by reducing the impact force (efficiency), in other words, by reducing the length of the handle. According to the decrease in length, its thickness increases, reaching up to 4.3 cm in diameter. On the contrary, in a battle ax, the thickness of the handle decreases in proportion to the increase in its length. It is impossible to work with such an ax handle (it will break), but it is convenient to fight.

The long handles of battle axes are known from ancient depictions. Interestingly, on the carpet from Bayeux (Tapestry from Bayeux, try to appreciate the scale or just look at this image of the tapestry, look live probably for the whole day) the ax handles held by the military leaders are long and thinner than those of the axes used by ordinary soldiers. If we compare this fact with the types of battle axes known to us, then we can assume that battle axes with the thinnest (and, obviously, with the longest) handles belong to military leaders, and ordinary axes belong to ordinary warriors. Long ax handles are also depicted on ancient Russian miniatures.

More topics related to the definition of a find. The main thing is to find, and what it is - we'll figure it out. Happy cop everyone!

P.S. Pay attention ➨ ➨ ➨ Bomb theme - . Take a look, you won't regret it.

↓↓↓ And now let's move to the comments and find out the opinion of experts. Scroll the page down ↓↓↓, there are reviews of diggers, MD specialists, additional information and clarifications from the authors of the blog ↓↓↓

Hello dear readers! Today I would like to continue the topic "Battle axes" and describe to you about such an instance from this series as an ax. Let's talk about its characteristics and functionality. And also about several varieties of axes common in Asia and Europe.

Ax - one of the varieties of a battle ax, is considered a chopping melee weapon. Characteristically differs from other axes in the blade in the form of a crescent, pointed along the convex part. It takes its roots from ancient times.

common in Ancient Greece the ax called "labrys" instead of the butt had a symmetrical second blade, like a butterfly. Historians write that weapons of the same form were common among the peoples of Asia and the Romans.

The ax was also known in many countries of Europe and in Russia. It was used in most cases by infantry to pull horsemen off their horses and break through heavy armor. For this, a strong and long spike, sometimes bent down, was located on the butt side of the ax.

Judging by the name, we can say that the ax is an ax, only the shaft itself is slightly longer. But there is a difference - it's a balance. The balance of the ax gives its owner a good freedom of movement. The ax is used due to its weight, like a hammer or mace.

In most cases, the ax differs from axes in that it can deliver stabbing blows, respectively, the ax would have to complete the feather, pointed forward, such as a halberd. In Asia, skilled martial artists preferred to wield an ax rather than an ax, since in good hands, the ax is capable of a lot. Judging by its appearance, we can say that this is a hybrid between a spear and a sword.

Characteristics of the ax

Ax consists of a shaft, a blade and a counterweight at the end of the shaft. The shaft of the ax consists of an ordinary stick, sometimes with a winding to prevent hands from slipping along the shaft. The length of the shaft depends on the method of use: for infantry up to 2.5 meters, "combat halberd"; for cavalry 70 - 80 centimeters, "horse axes"; for boarding ships up to 3 meters, "boarding halberd".

The warhead was pushed into the eye and fixed on the shaft with nails or rivets. The blade of the ax has very many types and forms, but in most cases it looked like a month-shaped blade, not far away from the shaft itself.

Since, the more the blade moved away from the shaft, the more the balance of the ax was lost, in turn, the possibility of fencing techniques. And if one side is heavier than the other, such an ax will be very difficult to wield.

The use of "butterfly" axes showed that it was difficult to strike with such an ax, the ax itself turned out to be very heavy and there was a very large inert force upon impact. There were also such axes, where the blade exceeded the shaft itself and served as a counterweight to itself.

Often the front of the blade was sharpened so that it was possible to inflict stabbing blows, although in several types of ax a kind of spike serves for this. Very often there is a gap between the blade and the spike or the blade and the shaft, which is used to capture the opponent's blade, but for this one must perfectly master the fencing techniques of the ax.

On the opposite side of the blade, where the butt is located, a hook is used in some types of axes. It is used for various purposes, such as: grab the wall or side of the ship, throw the rider off the horse, and much more.

The chopping part of the ax varies in length from 10 centimeters to a blade equal in length to the xiphoid blade. There is a protrusion at the bottom of the ax blade, below the fastener itself, it is called a pigtail and is used to better fasten the blade itself to the shaft.

The counterweight is a simple metal knob or spike that was used to rest on the ground, but it could also deliver an imperceptible blow. Without a counterweight, with an ax it would be very difficult to manage.

Ax functionality

The functionality of the ax allows you to use it as a spear, the difference between them is only in length, and of course the balance will not allow you to throw the ax like a spear. In a one-on-one fight, the ax has many advantages over other types of edged weapons.

With an ax, you can pull a warrior off a horse or strike at the lower limbs, unprotected by a shield. If, for example, spears were used in defense, axes and swords in attack, then axes were the golden mean between them. Although many armies used detachments of axes to protect the flanks, using pikemen in the center.

Since axes were common in many countries of Europe and Asia, in each country the battle ax looked different and was used, depending on the shape of the blade, for different purposes. But still, let's try to deal with each of them separately.

Halberd

The halberd is a melee polearm with a combined tip. The tip is a needle spear point up to one meter long and can be either round or faceted. The tip of the halberd itself sometimes had a hook. A small ax blade on one side, and on the other, a pointed butt is placed.

The advantages of the halberd were demonstrated to Europe in the XIV century, thanks to the Italian and Swiss mercenaries, who showed all the advantages of this ax in battle against knightly cavalry. In Flanders, the halberd was given the name "godenac".

The halberd was in service with many European countries from the 13th to the 17th centuries, but was most widespread in the 15th - XVI centuries, as the most effective weapon against armored cavalry. The shaft of the halberd reached 2 - 2.5 meters and the weight was from 2.5 to 5.5 kilograms.

The halberds differed only in the shape and size of the axe. The ax blade could be: flat or crescent, narrow or wide, concave or convex, in the form of an ax or chasing, the number of hooks.

But there were also halberds that did not have a spear point and looked like an ordinary ax on a long shaft. By the 15th century, the halberd had finally formed and looked like: a narrow hatchet on one side, and on the other, a curved and pointed headband, a large needle point, on one side a shaft, and on the other hand, a small knob or a small point for better sticking into the ground .

In battle, there was no armor that the halberd could not break through with its tip, with an ax or butt, crushing - chopping blows were applied, a rider was pulled off a horse with a hook or ships were pulled during boarding. Also, boarding halberds were equipped with a large hook for better grip and an elongated shaft (up to 3 meters).

The name of the ax comes from English word"broad axe", meaning a wide axe. The broad-blade ax has a wide trapezoidal blade. The most common brodex became in X-XI centuries, in the Baltics and Scandinavia.

On the territory of Russia, judging by the archaeological finds, there were practically none. Brodex had a characteristic rounded blade. Brodexes can be divided by appearance, with one-sided and two-sided sharpening. Double-sided brodexes were battle axes, but they were very heavy and inconvenient in terms of striking.

But later they were used, the executions that existed in the era of the New Age, the executioners chopped off their heads with such axes. Brodexes with one-sided sharpening, on the contrary, were not combat, but were used in agriculture. For example, due to their large flat surface, it was easy for them to process the surface of a fallen tree, beam or beam.

Berdysh

Berdysh is a cold weapon, like an ax - axes. The origin of the ax has not been sorted out, and to this day, some believe that it came from the French word "bardiche", others from the Polish "berdysz".

The blade is curved, resembling a crescent moon, worn on a long shaft, reaching up to 180 centimeters. They also said "ratovishche" on the staff. The blunt part of the ax blade had a hole for mounting on the rattove, and, as in an ordinary ax, it is called a butt, the opposite edge of the blade is also called stupid, and the end of the blade pulled down is called pigtail.

The ratovishche was attached to the metal, sitting on the butt and nailed or riveted, and the pigtail was tied with a strap. To nail the shaft to the butt, wells were made in it, their number could reach up to 7.

Pigtail they were also first nailed with several nails, and a rope or strap was still wound on top. In some cases, a thin strap on each turn was fixed with a small stud. On the lower part of the shaft, a metal tip was mounted, the so-called "flow", designed to better stop the reed into the ground.

subflow used in firing muskets, but also in parade formation. There are reeds in which small holes were made on the blade itself all over the canvas and rings were inserted into them. Thanks to this experiment, berdysh appeared, which were used by the cavalry. The berdysh of equestrian archers were much smaller than the axes of foot soldiers.

There were two metal rings for the shoulder strap on the ratovishe, so that it would be more convenient for the rider to use the reed. Riders began to use berdysh less and less often, since with the lightening of armor, swords became relevant, and later sabers.

Lochaberakst or Lochaber ax in English means "Lochaber axe" and takes its roots from the name of the territory in Scotland, called Lochaber. Outwardly, lochaberakst is very similar to a reed.

Ax consists of an iron blade with two eyes into which the shaft itself is inserted, about one and a half meters long. The length of the blade itself reached 50 centimeters and had both a flat surface and a wavy one.

The upper end of the ax was in the form of a crescent and sharpened so that it would be possible to inflict stabbing blows. On the eyes there could be a hook for pulling warriors from the cavalry. The Lochaber ax was used by both cavalry and infantry and was a very versatile and effective battle ax.

Studying history, it can be assumed that the lochaberakst, due to its functionality, was modernized into a halberd around the 15th century. But in Scotland they were relevant until the 18th century.

Sakravor translated from Armenian "Սակրավոր" , came from the word sakur, meaning an ax. In the ancient Armenian army, the soldiers were mainly armed with axes. From the name of the ax came the very name of the warriors - sacravor.

But since the warriors were very functional, their equipment also included other axes, military trench shovels. Sakravors were engaged in laying roads, cutting down forests, building bridges, setting up military camps, trenches, haravands "խարավանդ" and much more.

It was also the responsibility of the sacravores to monitor the "gumak" - a convoy of horses, oxen, carrying ammunition, food, camp supplies. In our time, you can hear in the Armenian army that they say sakravor to sappers. From which it follows that even in those days, the first multifunctional sappers appeared.

The Scandinavian ax is a medieval polearm. Different from most axes Scandinavian ax the fact that it had a wide blade, symmetrically diverging in different directions. The ax was very thin, it had side cheeks.

The thickness of the blade itself was about 2 millimeters, having a sleeve at the end, the width of the sleeve was 2.5 centimeters, and the length was 3.5 centimeters. The blade blade was also large, its width was 17 - 18 centimeters, and the length was also 17 - 18 centimeters.

For you to understand, it was not a square, since the blade diverged symmetrically in different directions. The weight of the ax without the shaft was about 450 grams, and the shaft reached a length of up to 120 centimeters. The ax takes its roots from its name - Scandinavia.

Due to their Norman influence, the Scandinavians introduced the ax to Europe in the 10th - 11th centuries, in Russia such axes appeared only in the second half of the 10th century, and full-scale use began only in the 11th century. If in Russia in the XII - XIII century, axes began to lose their popularity, then in Europe, on the contrary, they are used very massively.

During the XII - XIII centuries, axes undergo all kinds of modifications, such as: a spike is added, like a halberd, the length of the shaft itself increases. One of these modifications will polex . At the same time, an unmodified version of the ax is also used: as proof, they were used in Ireland and Scotland until the 16th century.

Polex

The Polex is a modified Scandinavian axe, considered a European polearm. In the XV - XVI centuries, the polex became one of the most widely used melee weapons for foot soldiers. Like all axes, the polex was also divided into a shaft, up to two meters long and a metal blade.

On the top of the polex blade there was a needle spike, on some axes such a spike was also placed in the lower part of the shaft. On the pole itself there were iron strips "langets" descending on both sides of the blade head to the bottom and were used to protect the blade from cutting.

There were poles with protection for the hands, such protection was called "rondel". But the most important difference in the polex was that all parts of the blade were assembled on bolts or pins, it was possible to replace the failed part with a new one. Because of this, it was very popular, since halberds at that time were solid forged.

The siege knife is a polearm. Its purpose was to cut and stab. It looked like both a halberd and a glaive, but it had a large shaft, about 3 meters.

The wedge-shaped tip had a wide cutting surface on one side and a large hook on the other, designed to cling to the fortress walls and climb the same walls with a knife. It was used mainly in Germany and was relevant until the 18th century.

Guizarma

Translated from Italian "guisarme" means guisarma, guisarma, guisarma . It is very similar to a halberd with a long narrow, slightly curved point, the blade of which is straight, with a branch pointed at the end. The first branch is long and straight, and the other branch is a slightly curved spike.

The thorn and the blade are placed at a decent distance from each other, according to the type of guizarama, one can say that its progenitors were ordinary agricultural pitchforks. The guizarama is the only European ax designed primarily for spectacular strikes.

Chopping blows with an ax were used primarily against horses, cutting their tendons, but it was also possible to pull off the rider himself. Such a specific weapon appeared in the 11th century, but the final result was formed only at the end of the 14th century.

Glaive

Translated from French "glaive" means glaive, glaive . The glaive is a polearm designed for close combat and was used only by infantry. It consists of a tip about 60 centimeters long, 5 - 7 centimeters wide and has a shaft about one and a half meters long.

Metal tape was often wound around the shaft itself to strengthen it from cutting, or rivets were applied for the same purpose. The tip is shaped like a blade, but sharpened only on one side of the wide "falcyon".

From the side of the so-called butt of the tip, a spike branches parallel to the tip, bent at a small angle. The functions of the spike included grabbing the weapon when repelling a blow from above, as well as delivering more powerful and effective piercing blows that pierce the enemy’s armor.

Since the tip itself could only deliver chopping blows, the glaive was mainly used as a chopping weapon. At the end of the shaft, there was also a tip, but in most cases it was used as a balance. Although, sometimes they also inflicted tricky blows or finished off the wounded.

Many believe that the glaive is the most ordinary scythe, only straightened and put on the shaft, as if continuing it, with the tip forward. Since the glaive is a relatively light ax, functional, it began to be used in France and Germany as early as the 15th century, but the use required special skills.

There were many modifications of the glaive, for example: a wide, ax-like tip on one side of the shaft and a spherical counterweight on the end; or on both sides of the shaft, there were identical, sharp, narrow, long blades.

All modifications cannot be counted, but I will point out several analogues of the glaive in other countries, for example:

• German "halberd"
• Polish "berdysh"
• Indian "bhuj"
• Japanese "nagamaki" and "naginata"
• Chinese "guandao"
• and, of course, "owl" from Russia

In conclusion, I would like to say that the ax was so functional that many countries and continents had their own axes, each country made its own modernization of the ax, so it is impossible and problematic to list them in one article. But in the future, I will write about battle axes, which I have not yet paid my attention to. So, stay tuned for new posts about battle axes! It will be boring!

By the beginning of the 12th century, the battle ax had firmly taken its place in the arsenal of truly knightly weapons, along with a spear and, of course, a sword. Although the Vikings had already died out by that time, two-handed axes served warriors throughout Europe for several centuries.

The axes became lighter, but practically did not change in size. Gunsmiths began to pay more attention to the butt - in some cases it became a pronounced combat element.

This handsome man was found in England, in a river flowing through Northumberland, along with the skeleton of the last owner. The date of the ax is the middle of the 13th century.

History has preserved many cases when it was battle axes that played an important role in the battle. So, on February 2, 1141, the English king Stephen, having broken his sword at the Battle of Lincoln, held the defense with a large Danish ax. And only when his shaft broke, the enemy managed to capture the king.

Two centuries later, in the summer of 1314, the battle ax of a man named .
This is the same Robert the Bruce, who became one of the heroes of the film "Braveheart", and who went down in history as the Scottish King Robert I.

Angus Macfadyen as Robert the Bruce. Shot from the film "Braveheart"

Remember the fight that ends the movie? It was the legendary battle of Bannockburn, at the very beginning of which the next episode happened.

The enemy of the Scots, the English king Edward II, began to gather forces to the battlefield in advance. And on June 23, the advance detachment of the British, consisting of young and ardent knights, stumbled upon the Scots, who were conducting reconnaissance of the area.

One of the pieces of the Battle of Bannockburn chess set by Anne Carlton

Sir Humphry de Bohun, who led the horsemen, recognized one of the Scots as their king and, intercepting the spear in the “to fight” position, rushed at him.

That day, Robert the Bruce left his spear in the camp, confining himself to a short-handled battle axe. And when he saw that the enemy was rushing at him, he made the only right decision in such a situation.

Giving the horse a command to leave the line of attack, Bruce met the knight with a powerful blow to the head.

In the 16th century, pollaxes would fall into disuse following plate armor. However, the idea of ​​a reinforced shaft will find its continuation in steel tubular handles for axes and maces.

But all this will come later. And in the 14th century, the most effective weapon of the knights was the pollax, which easily killed even an armored enemy.

The weapon turned out to be so dangerous that even in the 21st century, its blunted model is banned from use at many historical festivals in Russia. The surviving textbooks perfectly show the troubles that this weapon could do.

The technique of working with pollax, restored on the basis of these textbooks, can be viewed on the video.

The models of pollaxes used by combatants are not made on the basis of an ax, but war hammer. I will talk about this variety in the article “War Hammer”, which has not yet been written))). However, the video is quite revealing, and, which is a rarity, of good quality.

Weapons of the knights and the "star" of tournaments

From the very beginning, the battle ax was part of the obligatory program of knighthood. And everyone was aware of its danger, including the knights themselves. So, the French king Francis I refused to fight on pollaxes with his English colleague Henry VIII due to the fact that " there are no mittens that can adequately protect the hand«.
And these are the words of the almighty king!

However, not everyone paid attention to such a trifle as injuries. A great lover of cross battle axes was the French knight Jacques de Lalen, who lived in the middle of the 15th century. Here is a chronicle of just a few of his fights.

1445, Antwerp, battle with the Italian knight Jean de Boniface. While it came to pollaxes, the fighters managed to break six spears and continued the fight. When the turn of the pollaxes finally came, Jacques struck de Bonifas with such a blow that he nearly twisted him!

1447 Castilla, fight against Diego de Guzman. When Jacques and Diego fought on pollaxes, their blows were so violent that sparks flew from the armor.

1447, Flanders, battle with the English squire Thomas Kew. During the battle, Thomas hit Jacques de Lalen with the spike of his pollax in the hand. The point penetrated under the glove and went through, "cutting the nerves and veins, as the thorn of the Englishman's ax was surprisingly large and sharp."
Seeing that things were not going well, Jacques threw back his pollax and threw Thomas Q to the ground, thus winning the fight. Fortunately for the winner, the wound he received did not make him crippled.

On graves and coats of arms

In addition to war and tournaments, pollex was also used during the "God's Judgment" - a duel in which all charges were dropped from the winner. And one rule is connected with this kind of battles, which the tombstone makers knew very well.)))

So, if the justified winner did die from wounds received during God's judgment, then on the grave monument he was depicted wearing exactly the armor in which he cleared his name of accusations. The statue was supposed to hold a sword and an ax in crossed hands.
The one who was killed in a duel was depicted fully armored and also with crossed arms. However, all of his offensive weapons were depicted next to him.

Among other things, battle axes were an honorary armorial figure. They can be seen on the coats of arms of France, on the historical coat of arms of the King of Iceland and on the modern coat of arms of the Swiss canton of Saint-Gall.

Summarizing

Around the battle axes in knightly Europe they did not add such a halo as around the sword, which resembled a cross in its shape. However, the ax was a weapon no less important than the sword, and often the ability to handle it brought people fame, and hence immortality.

Literature

• Maciejowski Bible
• Ewart Oakeshott The archeology of weapons. From the Bronze Age to the Renaissance
• D. Aleksinsky, K. Zhukov, A. Butyagin, D. Korovkin “Riders of War. Cavalry of Europe"
• J.J. Rua "History of chivalry"
• K. Koltman “Knight's Tournament. Tournament etiquette, armor and weapons»
• R. Lovett "What is pollex"
• Count Michael De Lacy "Pollax: Description and Techniques"
• "Kings of England against Wales and Scotland 1250-1400" (almanac from the New Soldier series)

The battle ax has taken a firm place among the weapons of antiquity, and even in our time it is used. Nordic, Scythian, Russian - warriors from different countries fought on the battlefield with axes that crushed defense, bringing terror into the hearts of enemies.

Types of battle axes

A photo	View	Characteristics
	one-handed	Ax with a short shaft
	Two-handed ax	Ax with a long shaft
	Unilateral	One blade (blade)
	double sided	two blades
	Combination	On the butt hook, hammer, mace and even firearms

Story

Ancient battle ax

The progenitor of the weapon is considered to be a simple stone axe. Presumably, this type of battle ax appeared during the late Paleolithic. It was attached to the handle with the help of leather patches or animal veins. Also, sometimes a special hole was made, where the handle was inserted and then the resin was poured.

Initially, the sharpness of the blade was obtained by hitting one stone against another, which was the future blade.

Various stones were used, the main requirement is that their parts must be chipped off to give sharp edges.

They fixed the blade on a clutch made of curly wood, bone or antler. Some axes, for the possibility of fastening with flexible rods, had a special transverse groove.

On some stone blades, the simplest drawings were found. The craving for the arts and murders has been inherent in people since ancient times.

In most graves of those times, men are buried with stone axes. There are broken skulls - according to scientists, this means death from a blade to the head.

In the Neolithic, drilled axes appeared with a special hole inside the stone, where the handle was inserted. But the real application of this technology began only in bronze age.

Axes of the Bronze Age

In the Bronze Age, axes were made using drilling - with a special hole inside the blade for attaching the handle. A tubular bone was used for drilling, sand was taken as an abrasive. A stone drill, a bamboo stick or a copper pipe were also used.

Bronze is advantageous because it has hardly been exposed to corrosion - over time, it forms a kind of film that protects against pollution.

Celt - the so-called bronze ax.

It was available to various peoples. No extensive knowledge about him, unfortunately, has been preserved.

Axes of the barbarians of the era of Ancient Rome

To begin with, it is important to remember that for Ancient Rome, the barbarians were everyone who was outside their lands.

Against the background of other countries, the ancient Germanic tribes are known for their love for axes, as for a rather cheap and effective weapon at that time. Usually they took two small axes in their hands. They crushed shields and pierced armor (before armor appeared).

A popular ax of those times was a weapon called the francisca. He had a meter handle, as with his help they fought with one or two hands - depending on the situation.

It was also made with a short handle and was used for throwing. Threw Francis to destroy shields, punching holes in the forefront of the enemy.

The Germans preferred a free formation and, having made a hole in the defense, fought with each warrior one on one - in a close battle, the ax was ineffective. For the same Roman troops, with their clear formation and tactics, large shields, this weapon was not suitable.

Viking battle axes

The Vikings who fell upon Europe became a disaster, and their favorite weapon - the two-handed ax Brodex, the embodiment of horror and death.

The Vikings valued and loved their weapons so much that they gave them names - during the battle of enemies, axes with the names “War Witch”, “Wolf Bite” and many others were cut through.

To lighten the weight, the brodex blade was thin, but it had a distance from the tip of the blade to the butt up to 30 cm. It was not easy to miss, as well as dodge. The handle of the two-handed ax reached the warrior's chin - to match the terrible blade.

Despite the lethality Two-handed weapon had the disadvantage that it was impossible to defend against attacks, especially in a battle with several opponents.

Therefore, the Vikings valued one-handed axes no less. It is difficult to distinguish them from a simple, working ax. Two differences - a narrower blade and a reduced butt.

Russian battle ax

In Russia, thanks to the path from the Varangians to the Greeks, there were weapons of Scandinavians, nomads, and European models. Here the ax evolved into different types.

Chekan - Russian battle ax with a small hammer on the butt.

According to the classification of weapons, it is sometimes correlated with a war hammer, but there is no clear decision among experts on Russian battle axes on this issue. It was suitable for crushing the armor of the enemy.

In Russia in different times often used not only as a military weapon, but also as a badge of distinction of military leaders.

The berdysh (analogous to the European halberd) is also known. It has a long handle and a curved blade.

In the pictures of the past, you can see Moscow archers with a squeaker and a reed. Allegedly, each of them leaned the squeaker on the reed for a sure shot. In reality, not everyone used it - it depended on personal preferences in close combat. As a wealthy class, the archers could afford a reed as a weapon.

The savvy Russian mind, however, wanted to have an ax not only as a weapon, but also as a craft item for use during a campaign.

The ax became the ideal, which does not have a clear name, but in our time is known according to the classification of Kirpichnikov A.N. called Type 4. It has an elongated cut-out butt, two pairs of lateral jaws and a blade drawn down.

Such axes were also suitable for domestic needs - to chop branches for a fire or act as a tool for creating protective structures. In battle, they also proved themselves, easily crushing the enemy.

Battle ax and sword: comparison

The sword in the understanding of people has firmly established itself as a military attribute. In many fairy tales and films, a warrior often fights with him.

It took years of hard training to wield a sword.

Therefore, it could be professionally owned by people whose craft was war. For a militia: a peasant or an artisan who fell off the ground to go to war, an ax that was cheap to manufacture and easy to attack was preferable.

Of course, this means a one-handed ax - only a real hero could handle a two-handed ax well.

There was even a tactic when several mighty warriors with two-handed axes broke a dense formation, punching a gap for the allies.

The blow of the ax required a large swing - otherwise it was unlikely to break through the armor. With a sword, it is easier to deliver quick stabbing blows.

They did not differ in weight, so it is unlikely that a chopping blow with a sword took less time than maiming with an ax.

The sword was useful for defending, while the ax was suitable for crushing deadly attacks, but as a defense, the warrior had to dodge, rely on armor or hide behind a shield.

Modern battle axes

In our time, an army battle ax is used, or a tactical tomahawk.

The modern battle ax is used by the American troops - suitable for breaking doors and locks, opening surfaces, and also as an assistant in extreme situations and when performing operations in nature - in the mountains, forests, etc.

The military hatchet of the Americans is an analogue of our sapper shovel.

Of course, if necessary, you can hit them and the terrorist on the head once or twice. But these are extremes. The military hatchet of the Americans is an analogue of our sapper shovel in terms of the purpose of use.

ancient axes

boarding ax

Designed for felling in tight deck conditions. It had a length of no more than a meter, on the butt a hook that played the role of a hook - the latter was used to attract an enemy ship before boarding, or vice versa - to push it away.

Ax with firearms

AT naval battles flintlock pistols were sometimes attached to axes. To destroy the front rows of the enemy or use in a critical situation, if the fighter was surrounded by several enemies, the weapon fit perfectly.

Very few copies have survived to this day, so it is impossible to say anything about the frequency of use of such exotic weapons in the fleet.

Divination on an ax

A certain magician from Persia, Ostan, came up with the following divination: an ax was thrust into a round bar. Sometimes the action was accompanied by conspiracies. The answer to the question was interpreted depending on the vibrations and sounds emitted by the weapon during the impact on the bar.

With the help of an ax, they also searched for the criminal - taking the weapon by the hilt, called the names and waited - when the deck (the log on which the logs were chopped) began to spin, it means that the culprit was exposed.

Ax as a gift

It was customary for warriors to give weapons, including axes, for merit. Archaeologists have found many blades covered with silver, gold or damask steel.

Conclusion

Axes - formidable weapon capable of crushing any enemy. It firmly occupies a place in military history and took thousands of lives over many centuries.

Good day everyone! By writing this article, I am opening a new section on my resource - chopping melee weapons. There are many varieties of battle axes and it is simply not possible to consider them all in one article. And therefore, this article will be introductory - a kind of introduction to all subsequent ones, and at the same time - a table of contents for the section. I already used this practice earlier in the section on " daggers».

And now directly to the point. We all imagine appearance an ax, and this is not surprising - an ax is such a useful, convenient and practical thing for creative work, known to everyone, that it is simply impossible not to know about it. We will touch on a more interesting component of the hypostasis of the ax - its combat use and varieties.

A multifunctional shock-chopping melee weapon, a kind of ax designed to defeat the enemy's manpower. Distinctive feature battle ax is light weight blades (about half a kilogram) and a long ax handle (from fifty centimeters). Battle axes were single-handed and two-handed, single-sided and double-sided. A battle ax was used, both for close combat and for throwing.

According to the generally accepted classification, the ax occupies an intermediate position between conventional percussion weapons and bladed melee weapons. This is a group of chopping edged weapons or, as it is also called - percussion-chopping melee weapons.

A little about the origin of the ax ...

First, let's decide when the history of the ax begins? An ax similar to the classical form, having a handle and a striking part, appeared approximately six thousand years BC, in the Mesolithic era. The ax was used mainly as a tool and was intended for cutting trees, building dwellings, rafts and other things. The shock part was stone and roughly hewn. Only in the later stages of the development of the Stone Age did the ax begin to take on a more "human" appearance. Polished and drilled stone axes began to appear, which were used not only as a trench tool, but also as a weapon in close combat or hunting.

The ax is generally clearest example how an economic tool can be reborn and become a cold weapon. This basically explains its ubiquitous distribution among almost all peoples. And before the advent of other purely combat weapons, such as the sword, the ax was, in a way, a monopoly in the field of effective edged weapons. After the appearance of the sword, they became the main rivals for the championship in the field of combat edged weapons, this is especially clearly seen in the example of the West.

Why did the ax never lose the fight with the sword?

The answer to this question lies on the surface. True, there are quite a few reasons. Let's take a look at them. I will not consider the positive qualities of the sword, since the article is still about axes.

So let's go:

• An ax is much easier to make.
• The ax is more versatile.
• At close and short distances, the ax can be used as a throwing weapon.
• Much great power impact, due to the large mass and short blade.
• In combat, almost the entire design of the ax works. The corners of the blade can be used to poke or cling to the enemy, and the prepared butt was often used as a striking or stabbing weapon.
• Grip versatility. A battle ax can be used with one or two hands.
• High efficiency against enemy armor. Armor can actually break through, inflicting severe injuries to the enemy.
• The ability to inflict stunning, but not fatal blows.

As can be seen from the above material, the battle ax does not have positive qualities, and this is far from all. In general, the battle ax is a rather formidable and effective weapon.

General classification of the battle ax.

Let's now look at the main categories by which battle axes can be classified, there are two of them:

1. Handle length.
2. The shape of the blade of the ax itself.

The length of the handle, as the main criterion, could be of three main sizes.

Short handle was up to thirty centimeters long, and in the general case, equal to the length of the forearm. Axes of this size received another name - hand ax. Such axes could be used in pairs, striking with two hands. In addition, the small size of such an ax made it possible to throw it easily and accurately, as well as use it as a secondary weapon or a weapon for the left hand. It was convenient to hold such an ax under the blade and inflict a kind of “knuckle blows”. The handle itself at the end usually had a slight thickening, or a special limiter that prevented the hand from slipping.

The second version of the handle - medium size handle. Other name - two-handed ax. This variety had a handle up to one meter in size and was intended for a wide two-handed grip. With this type of battle ax, it is convenient to block blows and counterattack. A metal ball, pike or hook was usually attached to the butt of the handle, which made it possible to deliver additional blows. In addition, with such a grip, one hand is protected by a blade, like a guard. Such an ax is convenient for use from a horse and in tight passages and rooms.

Third view- this is long handle. In general, the handle

such a battle ax is longer than that of two-handed ax, but less than that of the peak. Such weapons are designed mainly for combat against enemy cavalry.

By blade shape the classification is somewhat more complex. In earlier types of battle axes, the main emphasis is on chopping blows and, accordingly, such axes had an elongated shape from the butt to the blade. The length of the blade was often half the width of the axe.

The presence of a semi-circular blade with a length greater than the width indicates that this ax. This shape of the blade increases the possibility of stabbing, as well as chopping with an outflow of blows. At the same time, the penetration power of the weapon as a whole is somewhat reduced.

If the upper end of the ax is sharply protruding forward, giving more great opportunity inflicting piercing and cutting blows, then in front of us reed. Wherein classic reed additionally provides full protection of the second hand, due to the connection of the lower part of the blade with the handle. True, this variety is found only in Poland and Russia.

An ax that has a blade tapering towards the end and having a triangular or dagger shape is called slander. In general, klevets is very similar to minted, but due to the presence of a blade, it has the ability to apply undercutting blows. This type adequately copes with the armor and shields of the enemy, while not getting stuck in them.

Battle axes can be unilateral, and bilateral. On one-sided axes, on the side opposite the blade, called the butt, they usually put a hook or a spike - to deliver additional blows. Bilateral axes, on the contrary, had blades on both sides of the handle, as a rule, of a symmetrical shape. With such axes it is convenient to strike in both directions.

Since the article turns out to be cumbersome, for convenience it was decided to divide it into two parts. In the second part, we will take a closer look at the features of each species separately, as well as their historical changes.