Russian language project. Educational project in the Russian language "My language is my friend!" (Actual issues of the culture of speech) (grade 7) Topics for the project on the Russian language 7

The first page of the document has its own unique design that each student must adhere to. After all, the title of the abstract is the face of all the work done and it creates the first impression (negative or positive) of the inspector. If the first page is framed incorrectly, then the reviewer, without even reading the text, will send the document for revision.

The title page of the abstract is drawn up according to two main state standards:

GOST 7.32-2001 - “Research Report”. This applies to research work, which is the abstract. In this section of the section, all the necessary requirements are well described and students must adhere to them when they make out the main page of the work. That is, what exactly should be on the title.
GOST 2.105-95 - as a rule, they say ESKD, but the document is called in full: "Unified system for design documentation." This state standard is valid not only in Russia, but also in Belarus, Kazakhstan, Ukraine. Here are indicated General requirements to any text documents. That is, the student will read what the format should be title page how to write the name of the university, student and teacher details, etc.

Teachers of some universities are not guided by GOSTs, but create guidelines based on GOSTs, which spell out the requirements for the entire abstract, including the first page of the abstract.

Still, according to GOSTs, it is easier to draw up documents, because even if students did something wrong according to the training manual, the teacher will not be able to object, since the student adhered to state standards.

Title page rules

Despite the fact that university teachers create manuals with their own requirements, there are certain rules which must be adhered to in any case. Before creating the title page of the abstract, you need to set the margins: right - at least 1.5 cm, left - 3 cm, and top and bottom 2 cm, respectively.

However, it is better to learn these nuances at the department, as the teacher can change the requirements and deviate from state standards.

Title page home page The document for each student must contain the following information:

Country name (not always);
full or abbreviated name of the department. This should be discussed with the reviewer;
name of the discipline;
subject matter scientific work;
student data (the author who wrote the work). All data must be indicated in full, that is, full name, course or group number;
author's form of education. A student can study full-time, part-time or evening;
reviewer's data, that is, position (mandatory) and full surname, name, patronymic;
the city where the student is studying;
year of issue of the document.

It should also be remembered that the abstract should be numbered from the first page, but the page number is not affixed on the title page.

It is worth noting that not a single GOST regulates the font, that is, the type and size are not indicated. As a rule, teachers themselves say what font to use, usually Times New Roman, size 14. Therefore, before starting to write a work, you need to consult your reviewer about this, who will accept the work.

The procedure for preparing the title page of the abstract

Do not know how to arrange the title page of the abstract? If the teacher did not indicate his requirements, then the student can independently draw up a document in accordance with GOST.

To begin with, you can conditionally divide an A4 sheet into 4 parts. This is the top, center, right and bottom, and in each of them adhere to certain requirements.

In the first upper part in capital letters in the center is written: MINISTRY OF EDUCATION AND SCIENCE OF THE RUSSIAN FEDERATION. On the next line, the name of the university is written and below the name of the department in quotation marks. We present an example for clarity:

The second part is located in the center of the A4 sheet. Here the word is written only in capital letters: "SUMMARY", and after it the subject and topic of the scientific work are indicated. For example:

The third block must be right-aligned, where the data of the students (group, full name) and the inspector (position and full name) are written. The position of the teacher must be indicated:

And the last, fourth block, although small, is no less important. It is drawn at the very bottom of the page and must be centered. It indicates the city in which the university is located and the year the scientific work was published. It is worth remembering: if the abstract is submitted at the end of December, then you need to indicate the next year. The example shows that only the name of the city and the year are written. It is very important to note that the dot is not placed anywhere.

Of course, title pages often differ from each other. It all depends on the particular university and its requirements. Some teachers ask that the design of the title page of the abstract comply with all GOST standards, while others want to see a work written exclusively according to the training manual.

The title page of the abstract is issued quickly and easily if the student knows all the necessary rules. Here the requirements are minimal, but it is very important to correctly indicate the data not only of the university or department, but also of the teacher.

The article examined how to correctly issue the title page of the abstract in accordance with all GOST standards. When writing a paper, it is very important to consider the design of the first page. However, do not forget that universities often deviate at least a little from GOST, so it’s better to consult with your reviewer, and then start writing an abstract.

How to arrange the title page of the abstract correctly? updated: February 15, 2019 by: Scientific Articles.Ru

A template for the title page of a term paper can be downloaded for free from the Internet, but in order to avoid misunderstandings, it is safer to ask the alma mater staff for tips. Laboratory assistants or methodologists of the department will issue a single form, a template can also be asked from the teacher.

Each institution of higher education develops its own standards for maintaining research documentation, based on the unified national standards established by GOSTs. If a on their own to make a title page in Word according to the federal procedure, even the most captious reviewers of any university will not have any complaints.

State Standards of the title page for the term paper

The requirements for the form are:

in GOST 2.105-95, relevant since July 1996;
GOST 21.101.97;
GOST 7.32-2001.

GOST 2.105-95 ESKD has the status of interstate, which means that it operates in Belarus, Kazakhstan, Kyrgyzstan, Azerbaijan, Ukraine, Armenia, Georgia, Moldova, Tajikistan and Turkmenistan.

How to issue according to GOSTs

The page size of the title page should be A4. Font type state standards they do not strictly regulate, but Times New Roman of the 14th, less often of the 12th size is most often used.

The title page of the course work is considered the first, but the numbers on the sheets are put down starting from the chapter "Introduction".

Standard fields:

upper - from 1.5 to 2 cm;
lower and left - 3 cm;
right - from 1 to 1.5 cm.

The indentation values are set in MS Word 2010 at the top of the file in the "Page Layout" - "Margins" section - the line at the bottom of the "Custom Margins" drop-down box.

The title page for a term paper should contain the following information:

Full (without abbreviations) name of the university.
The name of the faculty and department.
Subject.
Topic.
Full name of the author.
Course number, group.
Full name, position of teacher.
City.

You can use uppercase (large, capital) and lowercase (small) letters. As a rule, the names of ministries, educational organizations and the topic are typed in capital letters (caps lock), the rest of the information is in lowercase. It is best to refer to the example title page on coursework from the department manual.

How to fill out the title page of a term paper

All information is located on the sheet in three blocks.

Upper ("hat")

Formatting in the center of the page. Dots are not placed at the end of lines. Letters are preferable to uppercase, a combination of uppercase and lowercase is allowed, the use of bold font:

There is a double spacing between the lines with the names of faculties and departments.

Central

It is located slightly above the middle of the title page. The type of study is written in font from 16 to 24, bold type can be used as an additional emphasis.

Be careful: there are no dots at the end of phrases. Center alignment.

Below, indented by two or three lines and shifted to the right, information about the student and his supervisor is indicated.

Completed (option - "Student"):

course, group.

Checked ("Head"): title, scientific degree, position, full name of the reviewer (head).

Post to right place this part is easier if you do not shift each line with the space bar, but use the functionality of the Word ruler - its icon is located in the upper right corner of the page. After clicking on the icon, a markup appears on the left and at the top. Move the cursor to the left edge of the upper scale, to the location of the two triangles joined by the vertices, wait for the window with the inscription "Indent to the left" to appear, holding the left mouse button, grab the square at the base and move the block to the desired distance.-

Lower ("basement")

Saint Petersburg 2017

Which universities, specialties and subjects are suitable for the sample

The title page for the term paper presented in the article is universal and suitable for all higher educational institutions and organizations in Russia and countries participating in the Interstate Council for Standardization.

Why is it important to get the title page right?

As a rule, students face a similar problem at the beginning of their studies. In the first, maximum, - in the second year of the institute. Often, after receiving a work assignment, a freshman does not know how to start its implementation. You have to spend a lot of time worrying. All this can divert attention from writing the abstract itself. The loss of time as a result will result in a loss of the quality of the work itself.
Therefore, it is advisable to study the rules for the design of the title page, to have a sample of its design with you. Moreover, for decades, no special innovations have been made to the regulations for the design of the first sheet of work.
A lot depends on the quality and correctness of the design of the first - title page. First, it is the face of your work. It shows how responsibly you reacted to the completion of the assignment.
Secondly, an experienced teacher is already appearance the first sheet can accurately assess the work itself, its quality and correctness of writing.
And, thirdly, you need to learn always and in everything. The habit of doing all the work "from cover to cover" on highest level, develops such important qualities of character as purposefulness, responsibility, punctuality and conscientiousness.

Guiding documents for the design of the title page.

All basic requirements and features for the design of the title page of the abstract are defined in GOST 7.32-2001. up to date for 2019 The document is called: “Research report. Structure and rules of registration”, and reveals in detail how it should be. Therefore, before starting work, in order to eliminate errors, you should study this document. Well, for those who prefer a more detailed and visual study of the issue to dry numbers and concise instructions, our article has been prepared.

Basic requirements for the title.

So, the first step is indentation. In order for the finished abstract to be stitched into one brochure, it is necessary to make an indent of 30 mm on the right. On the right, the size of such an indent is set to 10mm, and the top and bottom are the same, 20mm each. This is the distance to the frame, which is recommended to be performed in a classic traditional style. And already inside the frame have all the necessary information.
Item number 2. - font. The generally accepted font for the design of the entire abstract as a whole, and the title page in particular, is set to Times New Roman. If the text of the abstract itself uses the 14th size of this font, then for the design of the title page, it is possible to use different sizes, as well as highlighting in bold, underlining, etc.

Components of the title page.

For better assimilation, we conditionally divide the title page into parts. Let's consider each separately.
Top of the sheet.
We indicate the name of the Ministry in whose jurisdiction this educational institution is located.
A little lower, with an indent of 1 interval, the name of the university itself is written in capital letters.
Both lines are aligned in the center.

the design of the title page of the abstract.

Essay title page sample

Ministry of Culture Russian Federation

St. Petersburg Restoration and Art College

abstract

By discipline:

(the name of the discipline is indicated)

(In this line, the exact indication of the topic of your work)

Completed:
Student (_) course, (_) group
Full Name

Scientific adviser:
(Position, department name)
Full Name
Grade _____________________
The date _____________________
Signature ____________________

St. Petersburg

middle of the title page.

It also needs to be centered. It states here:
- The word "SUMMARY".
- by discipline:
- "hereinafter the name of the discipline itself"
- on the topic: (required colon)
- indicates the exact wording of the selected or given topic abstract
As a result, all information should be located on at least 5 lines (or more if the abstract topic does not fit in one line). There should be no quotation marks on the title page. And the word "SUMMARY" is allowed to be written
16th font, as it should stand out on general background, as the main page.
Bottom part.
It is drawn up after two intervals are indented (double-clicking the Enter key).
Further, all entries are made as indicated on the sample. Pay attention to the alignment of the text in this section. Formatting rules allow alignment, both on the right and on the left. However, this does not mean the edge of the sheet, but a conditionally created table in which this block of the title page is placed. It is within this table that you can perform left-alignment (as shown in the sample).
And finally: at the very bottom of the page you indicate the city in which the university is located and the year the abstract was written.

Conclusion:

We have already noted the importance of knowledge and ability to correctly draw up the title page of the abstract. We can only add that many educational institutions (especially higher ones) allow the introduction of their own characteristics. They may slightly, but differ from GOST, therefore, before drawing up the first sheet of work, contact your supervisor and check with him for such differences!

Video instruction on the design of the title page of the abstract in MS WORD

Pupils at school or students at the institute periodically perform various written works. They present various interesting ideas and development. They turn out to be interesting, informative and, of course, it is important that they are well-designed.

This is what teachers pay a lot of attention to. Consider how to arrange the title page of the project so that it meets the most stringent requirements.

The title page is drawn up according to certain rules.

This is done in the following way:

Sample design for a university

The correct design of the cover for the project can be on a specific example:

State educational institution
Higher professional education
"Orenburg State University"

This information is located at the top, right in the center, written in 16th letter size. Further:

Scientific project (24 size).
In the discipline "Fundamentals of design, construction of electronic equipment. Development of the design of an electronic device ”(23 font). Author (bold 16th font): student of the 14th group Petrov A.I. Supervisor (bold 16th font): Associate Professor Sidorov N.N.

Sample for school

In general education institutions, students very often have to deal with the implementation of projects. This is a very correct approach - having learned to design similar works still in school, as students, they will not experience any difficulties.

Important! The cover does not contain much information, rather, the most important thing here is to correctly place that small amount of space proposals using the right letter size.

A sample project for an eleventh grader in a regular school looks something like this:

Municipal budgetary educational institution gymnasium N 9 of the city of Togliatti (top from the edge 15 mm, 16 size).
Research paper in mathematics (bold, 24, in the very center).
Maths: exact science Or a humanitarian subject? (the title of the work itself, without quotes, dots, 28).
Author (bold, 16): students of class 11B Ivanova A. (simple, 16). Mathematics teacher: Nikolaeva N.R.
2018 (bottom, center, 16, no dot).

Project around the world

In elementary school, it is increasingly common for students to complete a project on a topic as an extra task.

Children willingly take on such a task. Firstly, it is interesting, and secondly, a good grade is guaranteed.

Of course, for the correct design of the title page, the teacher can lower it somewhat, but children quickly learn to do everything exactly in terms of its design.

It's quite easy, you just need to follow the following instructions:

Municipal budgetary educational institution

"Secondary school N 27"

the city of Chelyabinsk

(top 20 mm from the top, bottom edge, 30 mm left, 10 mm right - parameters specifically for elementary school, 12th size).

around the world

"Birds, animals of the Far North"

(the first word is bold, 16, subsequent words are bold, 16).

Completed by: 4th grade student Sergeev A.

Checked: teacher Nikonova A.K.

(16th size, "completed" and "checked" - bold).

(bottom center).

The text itself is typed in Times New Roman, 14.

Important! In elementary school, the requirements for the design of the title page are not as strict as in high school, so if desired, students can use suitable pictures.

The main cover of the project on the topic My family for an elementary school student is no different from any other work in the world around. It uses all the same indentation and font selection options that are designed for elementary school.

The only thing to do is to correctly and individually approach the title of the topic. After all, if the task is given to the whole class, it will not be very good if the name is the same.

Project in English

Cover page for work English language is no different from similar actions in Russian:

Title at the top of the page educational institution exclusively in English. It is important to do this very carefully and not make mistakes in it - detailed information can be checked online.
Next comes the name of the faculty itself and the specialty of the student.
Then the words Report on the course are typed right in the center, followed by the name of the discipline itself. Then immediately the title of the work. All this is in English and is highlighted in bold large print.
The lower part is a place for information about the student himself: III year student (3rd year student), JJKK-8 group (student group), Ivanov Stepan (surname and name of the student).

Making a project cover

Evaluation of the project or any other work, regardless of the degree of complexity, begins from the moment the teacher sees the title page. It is important to do everything flawlessly competently and correctly - the final assessment will largely depend on this.

The title page is a separate page, but it does not need to be numbered.
The top and bottom margins must be present, their size is 3 cm.
Name educational institution without abbreviations and abbreviations is located at the top right in the center. If this is a university, then the faculty and department should be indicated. All letters are capital.
Name educational organization be sure to clarify, because it can change from time to time. It will be very bad if the old name of the educational institution is present on the new project.
between information about educational institution and the next topic - 8 cm.
Be sure to indicate the type of work and its subject. Quotation marks and the word “Subject” itself are not allowed in the title.
In the lower right corner are the surname and initials of the performer, his status, and then the position of the supervisor along with his surname and initials.
The year should be indicated at the bottom of the page, moreover, just numbers, without the word “year”.
All characters are printed in Times New Roman, 12–14 pt. The exception is the theme of the work, for which a larger font is provided.

The creative project cover has some features:

It is drawn up on A4 sheet. Any work is done on this format, both in schools and in higher institutions.
Margins are standard: left - 20 mm, right - 10 mm, top and bottom - 15 mm each.
The line spacing is 1.5.
The title page is not numbered. Further numbering is centered at the bottom.
In more serious works, the ministry of the country to which the student's educational institution is related is printed at the top of the page.
At the top of the page is the name of the educational institution, size 16.
in the middle - creative project"(24th).
Next - the title of the work without the word "Theme", quotation marks and a dot at the end of the sentence. The name is distinguished by the largest size - 28. It should turn out to be capacious, clearly displaying the content, and not include abbreviations.
The lower right corner is for information about the author and his supervisor.
Below is the city and the year.

Useful video

Summing up

Hoping to get only an excellent mark for your work, you should not neglect the design of the title page. Just as a person is greeted by clothes, the first impression of the teacher is formed by the correctness of the design.

While studying first at school, and then at a higher educational institution, pupils and students constantly have to deal with the implementation of written tasks of varying degrees of complexity.

Therefore, having remembered certain rules, they will perform the design of the title page for any project without problems. All these actions will eventually be brought to automatism, and the student will be able to concentrate on the content of the work itself.

In contact with