Requirements for articles in journals Registration of articles

HIGHER
CERTIFICATION COMMISSION (VAK)
under the Ministry of Education and Science Russian Federation

Requirements of the Higher Attestation Commission of the Russian Federation for scientific publications based on the results of defending a dissertation

The following are equated to published works reflecting the main scientific results of the dissertation: ( In accordance with clause 10 of Decree of the Government of the Russian Federation of June 20, 2011 N 475 “On Amending the Decree of the Government of the Russian Federation of January 30, 2002 N 74 (On Approval of the Unified Register of Academic Degrees and Academic Titles and Regulations on the Procedure for Awarding Scientists degrees)",

2) patents for an industrial design, certificates for a program for electronic computers, database, topology of integrated circuits registered in the prescribed manner,

3) deposited in organizations state system scientific and technical information, manuscripts of works, annotated in scientific journals,

5) publications in electronic scientific publications.

Participation in conferences of any level does not equate to publication in peer-reviewed journals. They can only be regarded as another dissertation publication.

In addition, in accordance with paragraph 9 of the same Decree, there are two types of publication of the main scientific results of a dissertation for the degree of Doctor of Science:

2) in the form of a monograph - is a scientific book publication containing a complete and comprehensive study of the topic, which has undergone scientific review and satisfies the criteria established by the cited Regulations.

Peer-reviewed scientific journals included in the HAC list.

When publishing the main scientific results of the dissertation, it is necessary to know exactly what shortcomings and violations in the publication of your scientific results can lead to the cancellation of the publication and call into question the defense.

(Information letter of the Department state attestation scientific and scientific and pedagogical workers of the Higher Attestation Commission of the Ministry of Education and Science of Russia dated 03.26.2004 "On typical shortcomings and additional requirements for the execution of attestation files for applicants for the academic degrees of Doctor and Candidate of Sciences and academic titles of professor and associate professor in the specialty").

AT the list of main works on the dissertation should not include:

1. Works that are not related to publications on the topic of the dissertation (reports on research, newspaper articles).

2. Works that are "in press".

Until the issue of the journal with the article is published, it cannot be included in the list of dissertation research papers.

3. Links to electronic publications are allowed, according to the Regulations agreed by the Higher Attestation Commission and Informregister, only to periodic electronic online publications, but not to registered one-time materials of conferences, etc., which are also registered in Informregister.
4. Insignificant or inaccessible publications to the scientific community:
1) deposited manuscripts without annotations in scientific journals;

3) printed scientific journals:

a) who do not have ISSN and are not registered as mass media in Roskomnadzor;

d) free access to full-text versions of articles (electronic versions of issues) that are not available on the publisher's website;

e) headings, information about authors, annotations and keywords, bibliographic lists in Russian and English that are not on the site;

4) scientific monographs without ISBN, UDC and LBC.

2. The most significant works of the applicant should be given with the output data in accordance with GOST.

When determining the correct display of your work in the list of publications and in other cases of publication, you must use several GOSTs:

1. GOST 7.9-95 "SIBID. Abstract and abstract. General requirements"(interstate standard. ISO 214-76).

2. GOST 7.74-96 “SIBID. Information retrieval languages. Terms and definitions” (interstate standard).

3. GOST 7.82-2001 “SIBID. Bibliographic record. Bibliographic description of electronic resources. General requirements and rules for drafting.

4. GOST 7.60-2003 SIBID. Editions. Main types. Terms and definitions” (interstate standard).

5. GOST R 7.0.5-2008 SIBID. Bibliographic link. General requirements and rules for drafting.

Never use for shaping bibliographic references option "page and endnotes" text editor WORD!.

Link templates:

2. In the text: [Bakhtin, 2003, p. 18] In an off-text reference: Bakhtin M.M. The Formal Method in Literary Studies: A Critical Introduction to Social Poetics. M.: Labyrinth, 2003. 192 p.

3. In the text: [Tselishchev, part 1, p. 17] In an off-text reference: Tselishchev V.V. Philosophy of mathematics. Novosibirsk: NSU Publishing House, 2002. Parts 1-2.
Entries in bibliographic list are drawn up according to the rules for describing bibliographic references in accordance with GOST R 7.0.5-2008 and can be used to describe article bibliographic references.

Samples of registration of entries in the bibliographic list:

1. Valukin M. E. The evolution of movements in male classical dance. M.: GITIS, 2006. 251 p.

2. Kovshikov V. A., Glukhov V. P. Psycholinguistics: theory speech activity: textbook, manual for students of pedagogical universities. Moscow: Astrel; Tver: ACT, 2006. 319 p. (Graduate School).

3. Efimova T. N., Kusakin A. V. Okhrana i rational use swamps in the Republic of Mari El // Problems of regional ecology. 2007. No. 1. S. 80-86.
4. Far Eastern International Economic Forum (Khabarovsk, October 5-6, 2006): materials / Government of Khabar, region. Khabarovsk: Tikhookean Publishing House. state un-ta, 2006. T. 1-8.

5. Dirina A. I. The right of military personnel of the Russian Federation to freedom of association // Military law: a network journal. 2007. URL: http://www.voennoepravo.ru/node/2149 (date of access: 19.09.2007).

6. On the housing rights of scientists [Electronic resource]: Decree of the All-Russian Central Executive Committee, Council of People's Commissars of the RSFSR of August 20. 1933 (as amended and supplemented by resolutions of the All-Russian Central Executive Committee, Council of People's Commissars of the RSFSR of November 1, 1934, of June 24, 1938). Access from the reference-legal system "ConsultantPlus".

7. Northwestern Bureau of the Central Committee of the All-Union Communist Party of Bolsheviks. Common department. Protocols // TsGAIPD. F. 9. Op. 1. Unit ridge 109.

8. Grebenshchikov Ya.P. To a small course on bibliography: materials and notes, 26 Feb. - March 10, 1924 // OR RNB. F. 41. Unit. ridge 45. L. 1-10.
9. Federal target program"Destruction of stocks chemical weapons in the Russian Federation": approved. Decree of the Government of Ros. Federation of March 21, 1996 No. 305: as amended. Decrees of the Government of Ros. Federation of 24 Oct. 2005 No. 639 // Collection. legislation Ros. Federation. - 2005. - No. 44, art. 4563. - S. 12763-12793.

10. On Amendments to Article 30 of the Law of the Nenets Autonomous Okrug “On public service Nenets Autonomous Okrug": law Nenets, ed. env. dated May 19, 2006 No. 721-OZ: adopted by Sobr. deputies Nenets, author. env. May 12, 2006 // Nyaryana vynder (Kras, tundra) / Collected. deputies Nenets, author. env. - 2006. - May 24 .

3 .The applicant for a scientific degree should be given full information about publications on the topic of the dissertation.

1) when writing a dissertation, the applicant is obliged to refer to the author and (or) the source of borrowing materials or individual results;
2) when using in the dissertation ideas or developments belonging to co-authors with whom scientific papers were written, the applicant is obliged to note this circumstance in the dissertation;
3) these references should also be made in relation to the scientific works of the applicant, performed by him both individually and in co-authorship;
4) in the case of using borrowed material without reference to the author and (or) the source of borrowing, the thesis is removed from consideration by the dissertation council without the right to re-defend the specified dissertation. Failure to comply with any of the listed points without fail entails the annulment of the defense and the award of the degree.

2. General requirements for the content, style and volume of the article

2. General requirements for the content, style and volume of the article

Only previously unpublished materials are accepted.
The article must be original and author's.
The article should be written in scientific style.
Recommended amount of materials

– from 7,000 characters (including spaces) to 40,000 characters (including spaces), excluding bibliography and accompanying information. If your article is longer, it is recommended to split it into several articles.

3. Formatting

3. Formatting:

- in the editor Microsoft office Word

– font “Times New Roman”

– main text – size 14

– interval 1.5

- top and bottom margins -2.5 cm; left margin -3 cm, right margin -1.5 cm

- indent (paragraph) -1.25 cm.

- alignment in width.

4. Structure of the article (updated 05/31/2018)

4. Article structure:

- About the author ( ; place of work / study completely in nominative case, City, country) . If there are several authors, indicate as follows: 1 ORCID: 0000-0002-1825-0097, PhD student; 2 ORCID: 0000-0002-1825-0023, Candidate of Physical and Mathematical Sciences, Associate Professor , Ural federal university; Yekaterinburg, Russia

- the title of the article (capital letters, bold, centered);

- annotation (description of the goals and objectives of the study, as well as the possibility of its practical application). The volume of the abstract should be at least 500 and not more than 2500 characters with spaces;

– keywords (3-5 words) in Russian;

- the main text of the article;

– bibliography (the material should be provided with at least 10 sources).

5. References

5. Making a list of references in Russian and English

The list of references is drawn up according to GOST 7.1-2003.

If a the list of references contains sources in Russian (other language than English), it is necessary to issue 2 lists of references.

1st - contains sources in the original language. It is issued under the heading “References / References”.

2nd - contains translation of sources into English language. Partially performed by transliteration. Transliteration can be done. It is issued under the heading “References in English / References in English”.

If a sources are only in English (another language that is written in Latin), then only 1 list of references is drawn up. Under the heading " References / References”.

Design examples are shown below. Toredelements that are translated into English are highlighted. In the article, all sources are formatted in black (“Auto”).

6. How to translate academic titles and degrees

6. How to translate academic titles and degrees

Since in the Western system postgraduate education there are no concepts of candidate and doctor of science, please indicate your title in the accompanying information in English according to the following examples:

Doctor/PhD in Architecture – PhD in Architecture

Doctor/PhD in Biology – PhD in Biology

Doctor/PhD in Veterinary Medicine and Science

Doctor / Candidate of Military Sciences - PhD in Military Science

Doctor/PhD in Geography – PhD in Geography

Doctor / Candidate of Geological and Mineralogical Sciences - PhD in Geology and Mineralogy

Doctor/PhD in Art History – PhD in Arts

Doctor/PhD historical sciences– PhD in History

Doctor/PhD in Cultural Studies – PhD in Culture Studies

Doctor/PhD medical sciences– MD

Doctor/PhD pedagogical sciences– PhD in Pedagogy

Doctor/PhD political science– PhD in Political Science

Doctor/PhD in Psychology – PhD in Psychology

Doctor / Candidate of Agricultural Sciences - PhD in Agriculture

Doctor / Candidate of Sociological Sciences - PhD in Sociology

Doctor/PhD technical sciences– PhD in Engineering

Doctor / Candidate of Pharmaceutical Sciences - PhD in Pharmaceutics

Doctor/PhD in Physics and Mathematics – PhD in Physics and Mathematics

Doctor/PhD in Philology – PhD in Philology

Doctor/PhD in Philosophy – PhD in Philosophy

Doctor/PhD in Chemistry – PhD in Chemistry

Doctor/PhD in Economics – PhD in Economics

Doctor/PhD in Law – PhD in Jurisprudence

Associate professor

Postgraduate student/Applicant – Postgraduate student

Professor

7. Graphic materials

7. Graphic materials (tables and figures) must be informative and of high quality. Graphic materials are printed colored.

Table design example

Table 1 - Influence of dilutions of aqueous extracts from waste samples on the level of algae fluorescence

Note: * - average for three repetitions for 72 hours of incubation; ** - in relation to the control

The table must have a title or description.
The table must be linked to and mentioned in the text ( see table 1 etc.).
Numbering of tables in the text should be continuous ( Table 1, Table 2, etc.).
The text in the cells of the table must be formatted uniformly (the same font, size, text alignment).
If the table has a note, then it is indicated immediately below the table in italics, alignment - in width.
Data units must be specified.

An example of drawing design

Rice. 1 – Open water heat pump ( a) and closed ( b) types:

1 - heating device; 2 - Heat pump

Note: scale 1 to 200

The drawing must have a title or description.
The numbering of figures in the text should be continuous ( Picture. 1, Figure. 2 etc.).
Pictures must be associated with the text and mentioned in it ( see picture. 1 etc.).
All drawings contained in the article must be of high quality.
Pictures should be informative.
Drawings include all illustrations (including: diagrams, photographs, diagrams, graphs, etc.).
If the drawing consists of several parts and has a common caption, then the individual parts are indicated by Russian lowercase letters (a, b, c, etc.)
The numbers of individual parts of the drawing are indicated by Arabic numerals (1, 2, 3, etc.).
All graphics are printed in color.

…»

Example: « L.V. Alekseev's book "Marketing Analysis" emphasizes …»

Example: "According to the Central Bank of the Russian Federation ..."

Example: "... space and other industries,."

An example for an English-language source in a Russian-language article: "...space and other industries."

An example for an English article:“… on the available cognitive mechanisms.”

GEOMETRIC PRECISION OF MACHINES WITH MECHANISMS OF PARALLEL STRUCTURE

A.V. Kirichek 1 , A.G. Ivakhnenko 1 ,E.O. Ivakhnenko 2 , A.Yu. Altukhov 1
1 FGBOUVPO "South-West State University", st. 50let Oktyabrya, 94, 305040 Kursk, Russia
2 Kursk branch of FGOBU VPO " Financial University under the Government of the Russian Federation, st. Lomonosova, 3, 305016 Kursk, Russia

Annotation:The influence of geometric errors of parallel structure mechanisms on the accuracy of machine tools is considered. Dependences are obtained for correcting the errors of such mechanisms and increasing the geometric accuracy of machine tools.
Keywords:geometric accuracy, metal-cutting machine, parallel mechanism, correction

Introduction

The main property of metal-cutting machines and systems is their accuracy, which has a direct impact on the accuracy of the parts machined on them. Of the various types of errors, geometric errors are inherent in all machines for all types, modes and processing conditions.

Increasing the accuracy of metal-cutting machine tools is associated both with an increase in the accuracy of their individual elements, and with the search for new structural solutions, i.e. their layouts. The search for such solutions is associated with both traditional layouts and the use of parallel structure mechanisms in machine tools, as well as their combination - hybrid layouts. The basis of this work is the variational method for calculating the accuracy of machine tools, based on the analysis of their shaping systems. The structures shown in the figure are a development of the forming systems brought into structures, in which the processing of one workpiece is carried out by one cutting tool.

<текст доступен в примере для скачивания>

Figure 1. Structures of shaping systems: a) chain; b) parallel; c) hybrid.

The common feature in the schemes of shaping systems presented in Figure (b, c) is the presence of a parallel structure mechanism, which can have a different number of degrees of freedom - from 2 to 6.

Formulation of the problem

In this paper, the influence of the parameters of the geometric accuracy of the parallel structure mechanism on the indicators of the geometric accuracy of machine tools and the machined part is considered. The shaping function, which completely determines the shaping capabilities of metal-cutting machine tools (without taking into account various kinds of bonds), is a product of the matrices presented in the table.

Table 1. Generalized displacement matrices

Another representation of the shaping function, proposed in the work, characterizes the structure of the metal-cutting system, in general view including: workpiece; preparation device; machine; tool fixture; cutting tool. Here we consider the representation of the shaping functionr 0 , which also characterizes the structure of the metal-cutting system, but reflects its composition, shown in Figure (c):

<текст доступен в примере для скачивания> (1)

where A last.1, A last.2 - the product of the matrices of coordinate transformations (table), serially connected links of the shaping system before and after the mechanism of the parallel structure (Fig.), respectively; A par is the matrix of transformations of the coordinates of the parallel structure mechanism; r l= (x l y l z l 1) t – radius vector of shaping points cutting tool.

Vector error Δ r 0 position of the machined surface point with a radius vector r 0 by expression (1) has the form

<текст доступен в примере для скачивания> (2)

Expression (2) takes into account the effect on accuracy all elements that make up the function of shaping. To establish the influence of the parameters of geometric accuracy of only the mechanism of a parallel structure on the indicators of the geometric accuracy of machine tools and the machined part, we will make the assumption that the remaining elements of the shaping are ideal, i.e. do not have geometric errors, and also that A last 1 = A last 2 = E (E is the identity matrix). The basis of this assumption is the property of additivity of the vector error Δ r 0 .

Analysis of the influence of the parallel structure mechanism on the accuracy of the machine tool

On the basis of the assumption made above, from expression (2) it is possible to single out a component that characterizes the influence on the accuracy of only the parallel mechanism

<текст доступен в примере для скачивания> (3)

Of the entire set of parallel mechanisms, consider the Stewart platform, which has 6 degrees of freedom and is used in the layouts of various machines - hexapods. When compiling the shaping function of such machines, virtual coordinates are used, while the matrix of transformations of the coordinates of the parallel mechanism has the form

<текст доступен в примере для скачивания> (4)

where the components of expression (4) are given in the table, thus

<текст доступен в примере для скачивания> (5)

Since only geometric errors are considered here (the influence of deformations of the rods of a parallel mechanism on the accuracy of processing is considered in), then expression (3) will be equivalent to the following expression:

<текст доступен в примере для скачивания> (6)

where the components of the matrix ε are the geometric errors of the position of the Stewart platform in space: δ x, δ y, δ z– small absolute displacements along the axes X, Y and Z respectively; α, β, γ are small angles of rotation around the axes X, Y and Z respectively.

Then, the components of the vector Δ r 0pm (6) will be equal to:

<текст доступен в примере для скачивания> (7)

Vector balance of geometric errors of the parallel structure mechanism (7) fully characterizes the potential causes leading to machining errors on a machine with a Stewart platform. Here the temptation arises - to determine such values of the parameters of the position of the Stewart platform, which would allow to completely, or partially, eliminate the components of the components of the vector Δ r 0pm

Example 1: an attempt to partially eliminate the influence zl in the Δ component r 0pm (1.1)

<текст доступен в примере для скачивания>

the solutions of this equation are the values of the angles φ= 0 and (or) ψ = ±p/2.

This example shows that such attempts only lead to the appearance of redundant links between the position of the virtual (and hence physical) coordinates of the platform, and, as a result, limit the shaping capabilities of the machine.

This example also shows that the study of the accuracy of machine tools without considering the process of shaping itself is rather abstract. The influence of various processes leading to the occurrence of a processing error cannot be considered separately from main function metal-cutting system - a cutting process consisting of two interrelated processes - shaping and stock removal.

Given the dual nature of the shaping function, all expressions for its definition, given both in and in this work, are based on the fact that it ( r 0), is also the radius vector of the machined surface r 0 = r 0 (u, v), where u, v– curvilinear coordinates of the processed surface. In proposed systems approach to obtain the metrological characteristics of the machined surface based on the normal balance of machining errors, defined as scalar product vector Δ r 0 and normal vectors n to the treated surface n = (n x n y n z 0) t.

<текст доступен в примере для скачивания> (8)

We modify the system of equations (7) in such a way that the following conditions are satisfied:

<текст доступен в примере для скачивания> (9)

where Corr x, corr y, Corrz– corrections made to the workpiece processing program to reduce the influence of geometric errors.

As shown in the above example, the direct application of expressions (9) is associated with the limitation of the shaping capabilities of the machine. Therefore, using the approach , we substitute expressions (9) into equation (8), after which we obtain basic equation for eliminating (reducing) the influence of geometric errors on processing accuracy

<текст доступен в примере для скачивания> (10)

It's important to note here:

1) correction values Corr x, corr y and Corrz are functions all virtual position coordinates of the Stewart platform ( x, y,z, φ, ψ, θ), which in turn are functions of variables ( u, v);

2) it does not matter whether a parallel mechanism is used to move the workpiece or the cutting tool (driven by a separate unit of the shaping system), since this implements a feed motion, therefore all the variables (virtual coordinates) in equation (10) are slow, i.e. compensated - independent of the speed of rotation of the tool.

The last subtlety allows us to recommend the proposed approach to reduce the influence of geometric errors of machine tools with mechanisms of a parallel structure on the processing accuracy. In this case, the matrix of coordinate transformations of the parallel mechanism (4) will take the form

<текст доступен в примере для скачивания> (11)

The transition from virtual coordinates that provide correction according to (11) to physical coordinates (platform rod lengths) is carried out according to the dependencies given in .

Example 2: consider the processing of a flat surface n =(0 0 1 0) t on the hexapod.

Equation (10) implies that Corrz = β x l- α y l- δ z.

The result obtained is similar to the dependence given in , however, there is fundamental difference. The coordinates of some points of the machine node are considered in order to control its geometric accuracy. Here we consider the coordinates of the cutting tool ( x l y l z l), which makes it possible to reduce the influence of geometric errors on the processing accuracy. We also note that in previous studies it was found that not all geometric errors of individual nodes affect the processing accuracy of a particular surface. This means that in a large number of processing cases such errors do not need to be compensated.

The practical application of the results obtained is associated with measuring the characteristics of the working space of the machine before the start of processing the workpiece and making corrections to its position during processing. In the event that a different mechanism of a parallel structure is used in the machine, then expression (4) must be modified (truncated), for example, for a mechanism with 5 degrees of freedom, the matrix of coordinate transformations can look like A steam = A 1 (x) A 2 (y) A 3 (z) A 4(φ) A 5(ψ).

Conclusion

The paper considers the influence of geometric errors of parallel mechanisms used in metal-cutting machines on the accuracy of workpiece processing. An equation was obtained to eliminate (reduce) the influence of geometric errors on the accuracy of processing. It is shown that the obtained results have general character and can be applied to machine tools with various parallel mechanisms.

Thanks

The work was carried out within the framework of the state task of the Ministry of Education and Science of Russia No. 2014/78, project code 1955.

Bibliography

1. Reshetov D.N., Portman V.T., Machinery accuracy ASME Press, NY, 1988, 304 pages.

2. Ivakhnenko A.G., The concept of designing metal-cutting devices. Structural synthesis, Khabarovsk State University of Technology, Khabarovsk, 1998, 124 pages.

3. Ivakhnenko A.G., Podlenko O.N., Accuracy of drive mechanisms, Russian Engineering Research, 2007, Volume 27, Issue 12, pp. 896-900.

GEOMETRIC ACCURACY OF THE MACHINES WITH STRUT-TYPE STRUCTURES

A.V. Kirichek 1 , A.G. Ivakhnenko 1 , E.O. Ivakhnenko 2 and A.Y. Altukhov 1

1 FGBOUVPO “Southwestern State University”, 50 let Oktyabrya Str.,
94, 305040 Kursk, Russia
2 Kursk branch of the FGOBU VPO “Financial University under the
government of the Russian Federation”, Lomonosova Str., 3, 305016
Kursk, Russia

abstract: The impact of the geometric errors of the strut-type structure mechanisms on the accuracy of the metal-cutting machines has been considered. The dependences for correction of errors of such mechanisms and improvement of the geometric accuracy of machines have been obtained.

keywords: geometric accuracy, metal-cutting machine, parallel mechanism, correction

References:

1. Reshetov D.N., Portman V.T., Accuracy of Machine Tools, ASME Press, NY, 1988, 304 pp.
2. Ivakhnenko A.G. Conceptual design of metal-cutting systems. Structural synthesis, Khabarovsk state technical university, Khabarovsk, 1998, 124 pp.
3. Ivakhnenko A. G., Podlenko O. N. Accuracy of shaping on hexapods, Russian Engineering Research, 2007, Volume 27, Issue 12, pp. 896-900

Publication scientific articles is a process that is subject to certain rules and requirements. In order not to waste your efforts in vain, it is necessary to understand all the nuances of preparing an article for a scientific journal in advance of writing a paper.

What should an article for publication in the VAK journal include?

Article HAC must meet certain requirements. Articles submitted to the editorial office must be related to the thematic direction of the journal, the authorship must be original, the article - not previously published.

The required minimum amount of text for publication in the VAK journal is from five pages.

Requirements for the design of a scientific article (fonts, spacing, margins are usually set out on the website of a particular publisher).

When choosing a topic, the author must clearly understand how the issue has been studied by scientists before. In this regard, it is necessary to familiarize yourself with the main literature related to the chosen topic. To do this, be sure to visit libraries, archives educational institutions, there are also many works, publications, dissertations in the network.

Name choice- a matter no less important than the presentation of the idea itself. If the title is chosen well, you will attract potential readers to your research. Conversely, if the title does not reflect briefly and succinctly what you want to say, the level of reader interest will be much lower.

We will separately consider the structure of the text of a scientific publication. In the introduction, the author should reflect the relevance of the issue under study, justify scientific novelty work, briefly outline the scope of his proposed solutions to scientific problems, highlight the effectiveness of his proposed method.

The main part of the article should be approximately 80-90% of the entire work. Here the author must describe the research methods used by him, describe in detail the stages of the research, the results of the tests.

An article can be theoretical or empirical and this has a direct impact on its structure.

Required content components:

analysis of previous research aimed at solving the problem posed, on which the author relies. It is necessary to indicate the specific scientists who dealt with this issue. If it is not possible to list them due to a large number, refer to the most authoritative names in the field.
identification of unresolved problems to which this publication is devoted. A feature of your work should be something that has not been studied before: this is a legal gap in the laws, or a periodization of a phenomenon developed by you. The effect of innovation, novelty is important.
definition of goals (problem setting).
a statement of the main essence of the research with a description of the data collection method is central part Your article, which you should pay special attention to.
conclusions and the vector of development of further research in this direction. This part of the article is the most important, because here you summarize all of the above and form your proposals for resolving the issue under consideration.

In other words, the final part should contain answers to the tasks indicated in the introduction. The reader should understand the purpose of your work, for which area of activity your research will be of practical importance.

Attention! The most difficult nuance is that the article is understandable to both a wide range of readers and a narrow specialist.

HAC requirements for scientific articles for dissertation defense

As mentioned earlier, there must be a certain coherent composition of the text - the meaning of each paragraph should follow from the previous one. The work should not give the impression of a chaotic, incoherent monologue. The consequence of this style of presentation is the lack of systematized substantiated conclusions.

Study the publications of venerable scientists, your more experienced colleagues.

Scientific articles, as a rule, are presented:

in an impersonal form;
divided into logical blocks;
all blocks are interconnected;
there is a clear text structure.

If the work contains a small review of scientific monographs, abstracts on the selected issue, do not forget about the correctness in relation to other authors.

In general, there are no special requirements that differ from the requirements of other publications for the articles of the Higher Attestation Commission. As well as any publication, the article of the Higher Attestation Commission should be distinguished by novelty, coverage of methods for obtaining data, and practical significance.

An example of requirements for an article in the Eurasian Law Journal

Eurasian Law Journal(hereinafter - EYJ) is in the List of leading peer-reviewed scientific journals and publications. The requirements for publications in such a journal are very high. If you decide to publish your work in this journal, you should familiarize yourself with the requirements of this publication in advance.

It must be remembered that the EYJ contains articles that correspond to the thematic direction this journal- materials on jurisprudence.

The article must be relevant to modern society, have scientific novelty and significance. You must justify which community your work will be of interest to - judges, lawyers, prosecutors. Otherwise, your article will not be approved for publication.

HAC requirements for the design of scientific articles: Be sure to indicate the name of the author, academic degree, then the title of the article, then the abstract and keywords in Russian and English. It is possible to translate the work into English. After the text of the article, a list of references is mandatory.

A simple failure to comply with the structure of an article, despite its brilliant content, can lead to a formal rejection of publication.

Starting the final stage of work on the "dissertation", which is the design, it is important to take into account all the requirements for the design of the dissertation Vak 2017 GOST. Consider the main thing - for particulars, a larger volume is needed than one article. At the same time, we constantly offer qualified assistance from experienced authors who know everything about GOSTs and are able to complete tasks of any complexity - promptly!

What are the requirements for the design of the dissertation Vak 2017 GOST - to the text?

All requirements for the design of a dissertation text come down almost to a tongue twister: Times New Roman - 14 - 1.5 - 1.25, etc. There are many Arabic numerals in everything, only they appear in the work. We decipher the "patter":

type the text and provide the final form of the work done by Times New Roman, because it is ideal for the design of scientific texts: strict, clear and readable;
font size (size) is also regulated - 14 pt;
1.5 is the line spacing: this is exactly what it should be in all work, except for the title page and the list of references (they use a single one);
1.25 is a paragraph indent, which should be the same throughout the text; it begins not only paragraphs, but also the headings of subsections and paragraphs;
“shores” (margins) of the page in millimeter “calculation”: right - 10, left - 30, remaining - 20. These page parameters are saved on all pages;
Pages are numbered consecutively. Appear in work only Arabic numerals, and in any numbering - whether it be pages or sections of the main part (the first page, the title page, remains without a number). The number on the page is displayed in the header in the center;
required amount of work: master's - 90-100 printed pages; candidate - 110-170, doctoral - 180-300.

Requirements for the design of the dissertation Vak 2017 GOST - links

A properly designed and numbered list of references makes it possible to correctly reference sources in text fragments - for this, square brackets are used. For example, the sentence: “the data of these studies are given in the works of Lavochkin O.G. and Logova R.M. ". The post-text link (the description of the source in the list) in this case will be as follows:

35. Lavochkin O.G. Psychological and marketing research. - M.: Academy, 2011. - 320 p.

36. Logov R.M. Investigation of the threshold of sensitivity. – M.: Academy, 2013. – 520 p.

It happens that the reference contains information about two or three sources. In this case, the information blocks are separated by semicolons. For example: ,

Requirements for the design of the dissertation Vak 2017 GOST - bibliography and tables

In the bibliographic list of a dissertation work, the recommended alphabet order placement of names. When compiling the list, pay attention to the surname of the first author (if there are more than one authors), or to the names of sources (if there is one author, and there are several of his books).

Sometimes alphabetical and chronological principles are combined (permitted by GOST). According to the same principle, sources are placed on foreign language, but after Russian speakers.

The following should be known about table formatting. Abbreviations are not allowed in table headers, endpoint. Tables are numbered sequentially throughout the text or within a section (in this case, the number will be double - including the table number and section number). The word "Table" with the corresponding serial number is placed above the grid on the right, below it with center alignment - the name (lowercase letters, capital letters, bold).

An important point: for the candidate obligatory moment is at least one publication in the periodicals included in the "List of VAK".