How to sign the title. Download title pages (abstract, term paper, diploma)

Many first-year students have problems with the correct design of a report or abstract. Very often, having received the task to write an essay, the student thinks about how to issue title page. The key to a good mark is not only the text of the abstract itself, but also an impeccably composed title page. Because the abstract is scientific work, its design should be high level. First of all, the title page should look neat. Further, on the left side of the sheet, we leave a place for binding. Indents must be done on all pages. It will be better if you take an indentation of three centimeters on the left, two on the top and bottom, and one and a half centimeters on the right side.

How to arrange the title page of the abstract?

Let's move on to choosing the size and font. The normal font for text is twelve. However, for the title, we need to choose a large font. As a rule, by standard we use TimesNewRoman. Next, you need to highlight the name in bold or italics. When choosing creative theme you can make the header original using different styles It is better to consult with your teacher in advance. When writing a serious topic, the standard design without any frills will be right.

How to properly format the title page of the abstract? To give the title page a beautiful appearance you can make a frame. It is best to choose a frame that is voluminous or with drawings, but in a classic style. The next step is to enter text. Exists state standard for formatting title page. However, it happens that higher educational institutions set their own standards regarding its compilation. To properly format the title page of your essay, it is better to take a sample from the department or from the teacher. The top text should be written in the standard font - Times New Roman. Its size is fourteen. Then we highlight the sentence in bold and align in the middle. The line spacing must be one.

The name of the faculty should be written in the center of the page. Usually the name of the faculty is written at the top. Next, step back down and write the word "abstract" in capital letters. Below we indicate the words “by discipline” and the name of the subject, and on the next line the word “topic” and the name of the work performed. We retreat down and on the right we write the details of the student and his teacher, including the mark for the abstract and leave a line for signatures. At the bottom of the sheet in the center is the name of your city, and at the bottom - the year of delivery of your work.

As a rule, reports begin to be asked from school. It is from the title page that one gets acquainted with the content of the report. Therefore, its design must be neat and correct. It is mandatory to indicate information about the educational institution, the topic of the completed report, the name of the student, and also write the year and locality. Let's take a closer look at how to properly format the title page of the report. Be sure to use large font.

At the top we write the name of our school or university, for example, "Secondary school No. 12 of the Ryazan municipality." Any abbreviation must be deciphered. This is usually done in capital letters. Go to central part pages and indicate the topic of work. To do this, first write the phrase “report on the topic” and on the next line capitalize the title itself, for example “ healthy image life." We retreat down and on the right indicate the last name and first name of the author, class, as well as the full name of the teacher. At the bottom of the page, indicate the date of writing the report, and below the city with a capital letter.

A correctly designed title page of the work testifies to the student's attitude to his project. The title page is the first page of your project, but it is never numbered. Before proceeding with its compilation, the standards of the educational institution and the teacher should be taken into account. At the top, in the middle of the page, write the name of your school. A little lower we indicate the name of the work performed.

Having indented down the middle of the page, indicate the name of your project, including the name of the subject. Remember that when designing the title page, the title of the topic is written without quotes. Next, go down and on the right side indicate the name of the faculty, your group or class and the details of the author. Just below the initials of the head of the word "checked (a)". If you do not know how to format the title page correctly, see the example on the sample.

At the bottom of the page, in the center, indicate your city of residence. On the next line, write the date of the task. It must be borne in mind that the word "year" is not indicated on the sheet. When filling out the title page, never put a dot at the end of the sentence. The only exception is the title of the work, which consists of several sentences. However, after last sentence point, respectively, do not set.

Coursework is one of the defining forms of a student's report on a particular subject. The rules for its registration in each educational institution may differ. But there are generally accepted standards for its design. The title page is drawn up on A4 format with a font size of fourteen. The font should be standard - TimesNewRoman. Before you start filling in the data on the page, you need to indent: one centimeter on the right, three on the left, and two centimeters on the top and bottom.

Translated from Latin, the title page means "inscription", "title". This sheet contains information about the educational institution, faculty, topic of the course work, subject, details of the student and his supervisor, as well as the locality and year of preparation of the work. The top line is filled with capital letters, bold and centered. The title of the topic of the course work is also written in the middle, but with big size font and always in capital letters. Do not put a dot at the end of the sentence. If the sentence is long, it can be written on two lines.

We write data about the student at the bottom right, aligning to the left. The student's name is written in genitive case. Skipping one line, indicate the initials of the supervisor or teacher. The name of the leader is written in nominative case. To enter this data, we use a font size of fourteen. And finally, at the bottom of the page, we indicate the locality and the year of delivery of our work, aligning it in the center.

Opening a file for the first time in a text editor Microsoft Word, the attention of absolutely any user is focused on the title page. A beautiful start - a presentable cover - is an impetus to action, a desire to familiarize yourself with the content. Sometimes a well-designed title page will say much more than the text below it. multifunctional Word application, which is one of best products Microsoft, is able to provide the user with some very attractive modern "titles" "sewn" into the program's capabilities. Using ready-made layouts, the user only needs to fill in the empty columns. In the article below, we will consider a method that helps to insert into a document not only a standard title page, but also create a unique first page design.

Using ready-made "titles"

To make a title page in Word, the user, among other commands of the main menu, must find the subsection responsible for inserting various elements. After switching to the "Insert" command, you should click on the "Pages" subsection, which contains a link that opens "Cover Sheets". As a result, several options, which are templates. After the user decides on the best option, you can confirm your decision by clicking on the layout with the mouse button.

It is important to know that you can insert a title page not only at the beginning of the document. At first glance, the ability to create a "title" in any place that only pleases the user may seem like a very dubious action. However, as practice shows, this kind of manipulation perfectly complements huge documents that have many separate chapters or sections. If necessary, the user can make his own title page for each of them.

Creating an original cover in a text editor Word

Although it takes only a few seconds to insert a standard template into Word that complements the document as a presentable cover, simple layouts created by application developers may not always meet the requirements of a potential user. The user can, using a huge toolkit of the software product, create his own unique "title book".

To do this, you need only a few minutes of free time. Initially, you need to use a combination of function buttons, Ctrl + N will allow you to create new document. Next, you have to decide on a more acceptable colors and drawings (pictures), if they are in the cover. If desired, the title page can be made white. The decision to paint the background with a certain color is made by adding a color. To do this, you need to place the autoshapes you like on a clean sheet and fill them with the desired color.

The next step helps to place several text blocks on the cover, all this together will create a ready-made base, which can later be inserted into any part of the document and filled out suitable words. To do this, the software product is equipped with "express blocks" located in the main menu of the program in the "Insert" category (section "Text"). After clicking on the command, a wide variety of blocks will appear on the screen; ready-made software solutions can be inserted anywhere in the template being created. Among other elements, most users of the Word editor have "Date", "Subject" and "Summary" on their covers.

After successfully inserting all the necessary text blocks, the user can change the color, size and font in the same way as when working with plain text. The color of the letters is also important, since when creating a dark background, black characters by default will simply be lost.

On this, the work on creating a unique title page can be considered completed, now you just need to save the template page. By the way, the new "title" will be located in the same place as the standard layouts. You can find it by browsing to the end of all software cover options. To save, you need to select everything that contains the cover page, then in the "Insert" category, go to the "Pages" section, open "Cover Pages" and select the "Save selection to cover page collection" item in the presented list of actions.

The user will only have to insert the name of the new "title" and a specific description (if necessary) in the appropriate columns of the dialog box that opens. Confirm your decision by clicking on the "OK" button.

You can check the correctness of the manipulations done by viewing the list of stored title templates. New cover should be located at the very end, immediately after the standard sheets.

Conclusion

Multifunctional software product Microsoft Word has an incalculable number of possibilities. Anyone can insert standard presentable title covers into their documents, and those who wish to use exclusively unique “title covers” own creation, can use the toolkit of the program and create exactly what they need.

A sample of the design of the title page of the term paper can be downloaded for free from the Internet, but in order to avoid misunderstandings, it is safer to turn to the alma mater staff for tips. Laboratory assistants or methodologists of the department will issue a single form, a template can also be asked from the teacher.

Every higher educational institution develops its own standards for maintaining research documentation, based on the unified national standards established by GOSTs. If a on your own to make a title page in Word according to the federal procedure, even the most captious reviewers of any university will not have any complaints.

State Standards of the title page for the term paper

The requirements for the form are:

• in GOST 2.105-95, relevant since July 1996;
• GOST 21.101.97;
• GOST 7.32-2001.

GOST 2.105-95 ESKD has the status of interstate, which means that it operates in Belarus, Kazakhstan, Kyrgyzstan, Azerbaijan, Ukraine, Armenia, Georgia, Moldova, Tajikistan and Turkmenistan.

How to issue according to GOSTs

The page size of the title page should be A4. State standards do not strictly regulate the type of font, but Times New Roman of the 14th, less often of the 12th size is most often used.

The title page of the course work is considered the first, but the numbers on the sheets are put down starting from the chapter "Introduction".

Standard fields:

• upper - from 1.5 to 2 cm;
• lower and left - 3 cm;
• right - from 1 to 1.5 cm.

The indentation values ​​are set in MS Word 2010 at the top of the file in the "Page Layout" - "Margins" section - the line at the bottom of the "Custom Margins" drop-down box.

The title page for a term paper should contain the following information:

1. Full (without abbreviations) name of the university.
2. The name of the faculty and department.
3. Subject.
4. Topic.
5. Full name of the author.
6. Course number, group.
7. Full name, position of teacher.
8. City.

You can use uppercase (large, capital) and lowercase (small) letters. As a rule, the names of ministries, educational organizations and the topic are typed in capital letters (caps lock), the rest of the information is in lowercase. It is best to refer to the example title page on coursework from the department manual.

How to fill out the title page of a term paper

All information is located on the sheet in three blocks.

Upper ("hat")

Formatting in the center of the page. Dots are not placed at the end of lines. Letters are preferable to uppercase, a combination of uppercase and lowercase is allowed, the use of bold font:

There is a double spacing between the lines with the names of faculties and departments.

Central

It is located slightly above the middle of the title page. The type of study is written in font from 16 to 24, bold type can be used as an additional emphasis.

Be careful: there are no dots at the end of phrases. Center alignment.

Below, indented by two or three lines and shifted to the right, information about the student and his supervisor is indicated.

Completed (option - "Student"):

course, group.

Checked ("Head"): title, scientific degree, position, full name of the reviewer (head).

Post to right place this part is easier if you do not shift each line with the space bar, but use the functionality of the Word ruler - its icon is located in the upper right corner of the page. After clicking on the icon, a markup appears on the left and at the top. Hover the cursor over the left edge of the upper scale, to the location of two triangles joined at the vertices, wait for the window with the inscription "Indent to the left" to appear, holding the left mouse button, grab the square at the base and move the block to the desired distance.-

Lower ("basement")

Which universities, specialties and subjects are suitable for the sample

The first page of the document has its own unique design that each student must adhere to. After all, the title of the abstract is the face of all the work done and it creates the first impression (negative or positive) of the inspector. If the first page is framed incorrectly, then the reviewer, without even reading the text, will send the document for revision.

The title page of the abstract is drawn up according to two main state standards:

1. GOST 7.32-2001 - “Research report”. This applies to research work, which is the abstract. In this section of the section, all the necessary requirements are well described and students must adhere to them when they make out the main page of the work. That is, what exactly should be on the title.
2. GOST 2.105-95 - as a rule, they say ESKD, but the document is called in full: "Unified system for design documentation." This state standard is valid not only in Russia, but also in Belarus, Kazakhstan, Ukraine. Here are indicated General requirements to any text documents. That is, the student will read what the format of the title page should be, how to write the name of the university, the data of the student and teacher, etc.

Teachers of some universities are not guided by GOSTs, but create guidelines based on GOSTs, which spell out the requirements for the entire abstract, including the first page of the abstract.

Still, according to GOSTs, it is easier to draw up documents, because even if students did something wrong according to the training manual, the teacher will not be able to object, since the student adhered to state standards.

Title page rules

Despite the fact that university teachers create manuals with their own requirements, there are certain rules which must be adhered to in any case. Before creating the title page of the abstract, you need to set the margins: right - at least 1.5 cm, left - 3 cm, and top and bottom 2 cm, respectively.

However, it is better to learn these nuances at the department, as the teacher can change the requirements and deviate from state standards.

Title page home page The document for each student must contain the following information:

• Country name (not always);
• full or abbreviated name of the department. This should be discussed with the reviewer;
• name of the discipline;
• subject matter scientific work;
• student data (the author who wrote the work). All data must be indicated in full, that is, full name, course or group number;
• author's form of education. A student can study full-time, part-time or evening;
• reviewer's data, that is, position (mandatory) and full surname, name, patronymic;
• the city where the student is studying;
• year of issue of the document.

It should also be remembered that the abstract should be numbered from the first page, but the page number is not affixed on the title page.

It is worth noting that not a single GOST regulates the font, that is, the type and size are not indicated. As a rule, teachers themselves say what font to use, usually Times New Roman, size 14. Therefore, before starting to write a work, you need to consult your reviewer about this, who will accept the work.

The procedure for preparing the title page of the abstract

Do not know how to arrange the title page of the abstract? If the teacher did not indicate his requirements, then the student can independently draw up a document in accordance with GOST.

To begin with, you can conditionally divide an A4 sheet into 4 parts. This is the top, center, right and bottom, and in each of them adhere to certain requirements.

In the first upper part in capital letters in the center is written: MINISTRY OF EDUCATION AND SCIENCE OF THE RUSSIAN FEDERATION. On the next line, the name of the university is written and below the name of the department in quotation marks. We present an example for clarity:

The second part is located in the center of the A4 sheet. Here the word is written only in capital letters: "SUMMARY", and after it the subject and topic of the scientific work are indicated. For example:

The third block must be right-aligned, where the data of the students (group, full name) and the inspector (position and full name) are written. The position of the teacher must be indicated:

And the last, fourth block, although small, is no less important. It is drawn at the very bottom of the page and must be centered. It indicates the city in which the university is located and the year the scientific work was published. It is worth remembering: if the abstract is submitted at the end of December, then you need to indicate the next year. The example shows that only the name of the city and the year are written. It is very important to note that the dot is not placed anywhere.

Of course, title pages often differ from each other. It all depends on the particular university and its requirements. Some teachers ask that the design of the title page of the abstract comply with all GOST standards, while others want to see a work written exclusively according to the manual.

The title page of the abstract is issued quickly and easily if the student knows all the necessary rules. Here the requirements are minimal, but it is very important to correctly indicate the data not only of the university or department, but also of the teacher.

The article examined how to correctly issue the title page of the abstract in accordance with all GOST standards. When writing a paper, it is very important to consider the design of the first page. However, do not forget that universities often deviate at least a little from GOST, so it’s better to consult with your reviewer, and then start writing an abstract.

How to arrange the title page of the abstract correctly? updated: February 15, 2019 by: Scientific Articles.Ru

How to properly issue the title page of the abstract in accordance with GOST? This question is asked by both students and schoolchildren who undertake research work within the framework of school curriculum. Legislatively, the rules for the preparation of abstracts are regulated by standards (GOST 7.32-2001 and its annexes).

Note!

There are several types of abstract works. So, GOST provides, among other things, for the preparation of an abstract for research, an abstract for a dissertation. Therefore, we immediately warn you: we are talking about the design of an abstract work devoted to the presentation of a particular topic or problem. Other types of abstracts and features of their design will be considered in more detail in other articles.

Memo on how to make a title page for an essay

1. The title page of the abstract is A4 size.
2. The font, its size and line spacing are stipulated by the methodological instructions of the university (institute, technical school, lyceum, school).
3. GOST provides for the need to fill in the title page of the abstract 14 in Times New Roman, bold, with a line spacing of 1 or 1.5 1 (clause 6.10.1 of GOST 7.32-2001).
4. Alignment is done depending on the block.
5. Since the legislation does not provide for the mandatory use of GOST rules for the preparation of an abstract, the educational institution brings to the attention of students in the training manual (usually located in the Annexes) how the title page of the abstract should look like.
6. The title is not numbered, although it is taken as the first page.

How to Write an Essay Cover Sheet: A Step-by-Step Guide

See what the title page looks like below. Conventionally, it can be divided into several blocks:

1. In the upper block are written: the name of the ministry to which the educational institution belongs, the name of the institution with a center orientation, for example:

Sample design

Ministry of Education and Science of the Russian Federation

MOSCOW STATE UNIVERSITY IM. M.Yu. LOMONOSOV

2. Middle block: information about the discipline and the topic of the abstract, orientation in the center, for example:

Sample design

By discipline: History

Topic: February Revolution 1917 in Russia

Please note: GOST does not provide for the need to put quotation marks, however, the methodological instructions of your educational institution have the right to stipulate this, and then the topic name will need to be enclosed in quotation marks:

Sample design

By discipline: History of state and law

Topic: "The formation of Soviet authorities in 1917"

3. Right block: the abstract must be signed correctly! Information about the author of the abstract and the supervisor (the teacher who will check it and allow it to be defended), with right orientation:

Sample design

Completed:

2nd year student

correspondence department

group I-23

Polevoy Oleg Ruslanovich

Checked:

Senior Lecturer, Department of History and Social Science

Gursky Ivan Petrovich

Grade __________________

The date __________________

Signature__________________

Note!!!

Corporate ethics requires that before the name of the teacher, his position must be indicated, as well as - if any - a scientific degree. Do not take risks: there are cases when problems with the defense of an abstract began with such a “little thing” as the lack of regalia of a teacher on the title page.

4. Bottom block: an indication of the city in which the educational institution is located, as well as the year the abstract was written. Orientation in the center, at the very end of the page:

Sample design

Little tricks on how to print the title page of the abstract

As a rule, the problem with the design of the title page goes away as the student gains experience ... For those who are faced with the question of how to write the title page of an abstract for the first time, advice from "experienced" students:

• The department must have titles in electronic form. Let the head of the group ask the secretary for them - and you will only have to enter the necessary data into a ready-made form and print it.
• Even if you order an essay from us - do not ignore the training manual! Remember: even experienced authors cannot predict many nuances. Therefore, take care in advance to provide methodological instructions - and then our author will print the title page for you, you just need to specify it in advance .
• Many universities place their guidelines in the public domain for students: check if it is possible to download them.

Subscribe to us on VK.
Every day we publish useful life hacks for study